Latest printer table Tenders | Government printer table Tenders

Central Government/Public Sector

CTN :39614180

28 Mar, 2025 24.99 Lacs

Delhi - Delhi

Tender For supply of provision of furniture and misc items at bahadurgarh railway station under amrit stations scheme--providing and placing of 2 seater sofa. overall size of 2 seater sofa: 1460mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-chargeproviding and placing of 3 seater sofa. overall size of 3 seater sofa: 2060mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.6 each3providing and placing in position of center table. the top shall be made of which shall be 12+/-0.3mm thick blacktinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. it shall be awelded assembly made in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall bewidth of table- 1120 mm, depth-600 mm, height-351 mm. certification: the company should be iso-9001,14001, 45001, bifma membership and aiota certified. the item should be as per certifications andspecifications as per the direction of engineer-in-charge.4 each4providing and placing in positon of corner table. the glass shall be 12+/-0.3mm thick black tinted toughened glassuv glued with bushes made in ss 202 grade for fixing with understructure. it shall be a welded assemblymade in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall be width of table=60.0 cm, depth=60.0 cm, height=35.1 cm. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.3 each5providing and placing overall size of the table shall be 1800mm(w) x 900mm(d) x 750mm(h) & side table1200mm(l) x 500mm(d) x 750mm(h). the table is made of 25 mm thick mdf one side pre-laminate boardconfirming to is-14587:1998 with 0.4 mm pvc membrane pressed on to top. soft closing access flap within-buildpower box are provided on work surface for wire management. the eru top is made of 25 mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pvc m

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Central Government/Public Sector

CTN :39618700

20 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of work table (ss) for dismantling of distributor valve as per drg no. jhs-sk-3012 alt latest. material sp ecification as per drawing [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39610062

15 Mar, 2025 2.00 Lacs

Bulandshahr - Uttar Pradesh

Tender For corrigendum : construction work of speed table at bhoor chauraha in district bulandshahr

State Government

CTN :39610314

15 Mar, 2025 2.00 Lacs

Bulandshahr - Uttar Pradesh

Tender For corrigendum : construction work of speed table at kala aam chauraha in district bulandshahr

State Government

CTN :39624786

17 Mar, 2025 20.00 Lacs

Shikohabad - Uttar Pradesh

Tender For work of table top thermoplastic paint repeated bar cautionary board tree plate and crush barrier at 02 no black spots banwara and jhapara located on etah shikohabad road sh85 in firozabad district

Private Sector

CTN :39606111

28 Mar, 2025 NA

Pune - Maharashtra

Tender For supply of false ceiling framework , false ceiling boards , outside partition with toughened glass and door , internal half partition , front showcase cupboard , main desk with double top , main desk toughened glass , table with side storage , table glass , kitchen platform with sink , electric work , oil base luster with putti and primer , wooden flooring with fitting , core cuttings , electric box , fix chair l and b , revolving chair

State Government

CTN :39624485

18 Mar, 2025 NA

Satara - Maharashtra

Tender For supply of classroom stools (q3) , wooden shoe rack (q3) , wooden podium (q3) , side table (q3) , chair (preschool kit) (q3) , wooden book case (q3) , modular work stations (v2) (q3)

Central Government/Public Sector

CTN :39606218

17 Mar, 2025 4.95 Lacs

Sundergarh - Odisha

Tender For supply of godrej make furniture items - eudora v2 queen bed , mattress ortho plus 78 60 5 , eudora bed side table , encardo 1 seater , table work 4020 , chair thrill mesh , bayflow 3 seater , long back chair la sede high back , fresh pillow

CTN :39611023

17 Mar, 2025 NA

Bangalore - Karnataka

Tender For supply of wooden book case (q3) , modular work stations (v2) (q3) , revolving chair (v4) (q2) , office chair (v3) (q2) , executive table (v3) (q2) , sofas (v2) (q3)

Printer Table Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors