Web Analytics Made Easy - StatCounter

Proclainer Hiring Tenders

Get complete information related to latest Proclainer Hiring Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Proclainer Hiring Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Proclainer Hiring Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government And Public Sector

CTN :39622709 Due date: 18 Mar, 202518 Mar, 2025 48.00 Lacs
Tender For asset management services - asset to be valued; onsite-supply of equipments:- variable refrigerant flow system, outdoor unit(s) - heating & cooling, 8hp outdoor unit, , indoor unit, ductable type units, ductable type unit 5.5 tr, , split units , split units 2.0tr, , , refrigerant joint(s), indoor refnet joints , controllers, central remote control, twining kit, pcb safety plate controller, installation of airconditioning system of following items--lifting, shifting, installation, testing and commissioning of outdoor units equiped with highly efficient varaiable speed scrool compressors in each outdoor unit with noise level not exceeding 70db(a), etc. with nitrogen reprocessing, vacumising, charging and top-up of r410 a gas as per requirement at site. (r410a gas make-dupont/honeywell) , lifting shifting & installation of outdoor units - 8hp , tesing & commissioning charges - 16hp , vacuum, nitrogen reprocessing & r410a- refrigerent topup -16hp , lifting, shifting, installation, testing and commissioning of indoor units with outer cabinet equiped with pre air-filters, multispeed inverter motor, dx coil section, drain pain,electronic expansion valves, pipe connections, pcbs etc. (fastener make- hilti) , , , indoor unit(s), ductable type units, ductable type units, ductable type unit 5.5 tr, , "supply, installation, testing and commissioning of refrigerant piping, tees, sockets, expanders and reducers as per requirement at site complete with supports, threaded rods, channel, tie, fasteners etc. interconnecting the outdoor condensing units and indoor evaporating units. (make-mandev/mexflow), nitrile rubber tubular insulation (make-supreme/superlon/armaflex/a-flex/k-flex/equivalent)" , "supply, installation, testing and commissioning of 2 core x 1.5 sq.mm copper conductor shielded data cable as per requirement at site complete with supports, threaded rods, channel, tie, fastners etc. for control between indoor and outdoor unit & for communication between indoor unit & remote controllers in suitable pvc conduict , (make- polycab/havells)" , , supply, installation, testing and commissioning of pvc condensate drain piping of 10kg/sq.cm. (142.23 psi) with 6 mm thick closed cell elastomeric nitrile rubber tubular insulation up to the nearest drain point along with necessary fittings.(make- prince/supreme/finolex/polycon/equivalent) , supply, installation, testing and commissioning of hot dipped 20 gauge g.i. perforated trays for exposed refrigerant pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc. , , supply, installation, testing and commissioning of un-insulated square/ rectangular sheet metal ducts as per requirement at site complete with threaded rods, channel, tie, fastners, brackets/slotted "c" channel for supply air ducting as per the approved shop drawings jindal, sail, tata. , , supply, installation, testing and commissioning of closed cell crossed linked polymers xlpe insulation , , supply, installation, testing and commissioning of acoustic lining with 10 mm elostomeric sinusoidal surface acoustical insualtion. , , supply, installation, testing and commissioning of extruded aluminum powder coated supply air grills/difusers with dampers and return air grills/diffusers without dampers. , supply/return air grills/diffusers with volume control dampers , supply, installation, testing and commissioning of nrv , , supply & installation charges of accessories fire retardent canvas connection & filters as required for duct type indoor units. , ms-stand for odu unit , ms-jaal , civil work chase cutting for copper/drain pipe , civil work rcc corecut/chase cutting for copper/drain pipe , annexure-iii-electrical installation and accessories-panel for 16hp odu , design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following lt panels fabricated out of 18 guage crca sheet steel in cubical formationwith reinforecment of suitab

CTN :39622980 Due date: 28 Mar, 202528 Mar, 2025 NA
Tender For supply of labour charges for changing of engine oil by replacement of mobil oil etc , labour charges for repair to front both side cabin seat and floor etc , labour charges for repair to rear both side body and hood frame etc , labour charges for repair to rear dala and foot rest etc , labour charges for repair to rear floor rusted portion etc , labour charges for repair to glass lifting system and door locking system etc , labour charges for repair tom clutch system etc , supply of engine 20w 40 oil , supply of oil filter , supply of air filter , supply of coolant , supply of distilled water , supply of glass machine , supply of glass bracket , supply of glass channel , supply of glass handle , supply of door lock , supply of clutch plate and pressure plate , supply of clutch release bearing , supply of clutch oil

CTN :39622981 Due date: 28 Mar, 202528 Mar, 2025 NA
Tender For supply of labour charges for changing of engine oil by replacement of mobil oil etc for repair of eicher canter ba no 08d 177213x under ge i af shillong , labour charges for repair to front both side cabin seat and floor etc for repair of eicher canter ba no 08d 177213x under ge i af shillong , labour charges for repair to rear both side body and hood frame etc for repair of eicher canter ba no 08d 177213x under ge i af shillong , labour charges for repair to rear locking assebly , floor rusted portion etc for repair of eicher canter ba no 08d 177213x under ge i af shillong , labour charges for repair to spring leaf hanging hoock and seating assembly etc for repair of eicher canter ba no 08d 177213x under ge i af shillong , labour charges for repair to glass lifting system, door locking system etc for repair of eicher canter ba no 08d 177213x under ge i af shillong , labour charges for repair tom clutch system etc for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of engine 20w 40 oil for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of oil filter for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of air filter for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of coolant for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of distilled water for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of glass machine for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of glass bracket for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of glass channel for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of glass handle for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of door lock for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of clutch plate and pressure plate for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of clutch release bearing for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of clutch oil for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of clutch cable for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of foot mat for repair of eicher canter ba no 08d 177213x under ge i af shillong , supply of leaf spring for repair of eicher canter ba no 08d 177213x under ge i af shillong

CTN :39623012 Due date: 28 Mar, 202528 Mar, 2025 NA
Tender For tender for supply of taking down complete toyo load spring leaf from back side including welding to hanging or bracing assembling and replacing worn out safety pin , bolt and nut including replacing new load spring leaf including testing and commissining tempering the or suspension level of vehicle. lifting jack used for replacing the load spring leaf for lifting for reepairing work as specified. , complete floor mat stitching fitting by best quality rexine cloth & foam etc. , repairing of complete front axle including replacement of following parts make maruti suzuki joint assy axle shaft (rhs) 01 set , joint assy axle shaft (lhs) 01 set , front axle housing 1 no. , oil seal 02 set , spindle front wheel 2 nos. , bush 2 nos. including all fitting and testing. , repairing of oil leakage repairing including replacement of following parts make maruti suzuki oil pan 1 no. , oil pan bolt lower 16 nos , timing belt 1 no. including all fitting & testing , repair to king pin system and replacment of 04 nos. king pin bearing , 02 nos. knuckle kit , 04 nos. wheel bearing (front) , 02 nos. wheel bearing (rear) , including greasing and testing. , wiper system repairing by replacement of 01 no. wiper motor with linker , 01 set wiper arm with blade including dashboard and replacing rubber feeding of window glass bracer -04nos incluidng complete testing and commissioning. , silencer repairing by welding with plate and changing of 02 nos. silencer mounting , 04 nos. nut bolt including complete and testing , taking down complete load shocker from front side including welding to hanging or bracing assembling and replacing worn out safety pin , bolt and nut including replacing new shocker including testing and commissining of suspension level of vehicle. lifting jack used for replacing the suspension shocker for lifting for reepairing work as specified. , supply of load spring leaf , supply of spring suppport assy , supply of shocker front , supply of dendrite , supply of joint assy axle shaft (rhs) , supply of joint assy axle shaft (lhs) , supply of front axle housing , supply of oil seal , supply of spindle front wheel , supply of bush , supply of oil pan , supply of oil pan bolt lower , supply of timing belt , supply of king pin bearing , supply of knuckle kit , supply of wheel bearing (front) , supply of grease , supply of wiper motor with linker , supply of wiper arm with blade , supply of silencer mounting , supply of silencer bolt , supply of rubber bracer of window glass

State Government

CTN :39650217 Due date: 19 Mar, 202519 Mar, 2025 28.00 Lacs
Tender For consultancy services for preparation of design, drawings, gravity distribution network system and package estimate & dtp for mareguddi lift irrigation system by lifting water from krishna river for providing irrigation facility in jamkhandi taluka, bagalkot district

CTN :39652807 Due date: 18 Mar, 202518 Mar, 2025 1.27 Lacs
Tender For maintenance of electrical installation and fans, repair maintenance of pump sets, dg set, fire fighting, fire alarm system at central excise & customs (nacin) admn. building at ultadanga, kolkata during 2024-25 (sh: supplying, installation, testing and commissioning of submersible open well monoblock pump motor set pumping suitable capacity 7.5 hp & manual lifting of the 15 hp capacity submersible motor set and after dismantling the same etc. as required).

CTN :39615839 Due date: 25 Mar, 202525 Mar, 2025 NA
Tender For corrigendum : supply installation operation and maintenance of gps and gprs etc based automatic vehicle tracking system in garbage lifting vehicles run under shimla municipal corporation integrated smart solid waste management system

CTN :39178137 Due date: 25 Mar, 202525 Mar, 2025 NA
Tender For corrigendum : supply of veterinary care,equipment - cryo apron, cryo boots, forcep for lifting of forzen semen goblets-12'', safety goggles during handling of ln2, alpha french mini empty straw, cryo gloves , artificial vagina 12, artificial vagina 10, latex cone 10.5, collection tube: , flexible tubes for is-4, automatic straw counting machine , ln2 container to store more than 4.70 lacs frozen 0.25 ml bovine semen straws (storage vat of capacity appx 500 liters) , wide mouth container to store more than 3.9 lakh frozen semen straws (storage vat of capacity 390 liters) , goblet 65mm, liquid nitrogen transfer hose pipe( non insulated)-5 mt, flow cytometer, miscroscope stage warmer, electro ejaculator, cryo cautery, cryovial 1.8ml pkt of 100, cryovial 4.5ml,pp, pkt of 100, brucella antibody test kit , digital weighing balance, digital lcd microscope, hot air oven, water treatment plant, refrigerator, "q- pcr (real time) with power back upgel doc system horizontal gel electrophoresis unit with power supplyu.v. spectrophotometer uv trasilluminatormini centrifuge machinewater bath upto1000c", cooling high speed centrifuge( 16000 rpm) with multiple rotors, pcr workstation, automated nucleic acid extraction sysytem, incubator, chemidocumentation imaging system, automatic elisa reader, automatic elisa washers/dispenser, digital ph meter, digital haemoglobinometer, esr analyser, pipette automatic, veterinary hematology analyzer (5 part), veterinary biochemistry analyzer, management system for analyzer operation, veterinary urine analyzer, 100 ml pp bottle with rubber bung &aluminium cup, 300 ml pp bottle with rubber bung &aluminium cup, ss 316 storage tank, capacity-200 lits with accessories, non invasive multiplexed biomass sensor system, peristaltic pump-201v, peristaltic pump-401v, bunsen burner, bod incubator, carbon dioxide incubator, laminar flow, dog ovulation detector, bovine pregnancy rapid test kit, standard nutrient broth (h.s.vaccine medium) lr, thioglycolate broth with liver extract (b.q vaccine medium) - lr , phenyl mercuric nitrate basic (pmn)- lr , potassium aluminium sulfate dodecahydrate - lr, d(+)-glucose,anhydrous (dextrose)-lr, liquid soap, hydrogen peroxide & silver nitrate surface disinfectant -ar, sodium hydroxide palette- lr, rectified spirit-ethyl alcohol-90%, glycerol - 99.5% ar, formaldehehyde solution 37% w/v ar , phenol (carbolic acid) - lr, sodium chloride -lr, peptone- bacteriological- lr, card board box, 3ml glass vial with rubber bung and alluminium cap, micro titre plate, micro titre plate, brookfields viscometer digital rotational viscometer , the leak tester apparatus

CTN :39614320 Due date: 17 Mar, 202517 Mar, 2025 NA
Tender For overhauling and servicing of various capacity manually operated lifting system at fpm panjrapur

CTN :39526480 Due date: 15 Mar, 202515 Mar, 2025 20.99 Lacs
Tender For lifting & transportation of ash, soot etc., collected in the unit-1 esp hoppers and conveying lines of esp fly ash system and other areas and disposal off the same at suitable place as per the instructions of the engineer in-charge during the financial year 2025-26
 Loading, Please wait...

Connect us via What's Up