Latest protective wear Tenders | Government protective wear Tenders

CTN :39572034

17 Mar, 2025 5.82 Lacs

Godda - Jharkhand

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - coal mines; electrical system or installation, testing and calibration of power and protective relay of htlt panels at sub station of rajmahal chp; service provider

State Government

CTN :39565718

10 Mar, 2025 1.51 Lacs

Udhampur - Jammu And Kashmir

Tender For providing and fitting of essential items and allied material for snow clearance operation at nathatop sanasar road - supply, testing and commissioning of 48v smps float cum boost automotive battery charger with moveable trolley stand for snow operation at nathatop - sanasar roadgeneral technical requirements for battery charger suitable for 48v vrla type battery1.) type -float & float cum boost charger for vrla type, full wave, full controlled type. 2. ) ratings- 15 a float cum boost for 48v, 150 ah vrla type battery 3. ) ac input- i) voltage 415 vac 10%ii) frequency 50hz 5% iii) phase 3 - phase 4.) d.c.output voltage settings -nominal float fc 48/54.5v (adj. by + 20%, - 5% bc 48/66.5v (adj. by + 2%, - 5%) 5.) output current limit 15a 15a 6. ) power conversion ac to dc by means of three phase full wave, half controlled bridge rectifier consisting of thyristors and diodes. 7.) voltage regulation at bridge output. + 1% of set value for + 10% input voltage variations, 0-100% load variation. 8. ripple voltage less than 3% rms without battery connected. 9. efficiency more than 80% at full load 10. protections (a) input side ac input mccb & elbs with input on/off switch and fuses, contactor (b) output side dc output mccb with output on/off switch and fuses. (c) protection current limit protection, soft start feature, surge suppressor. fast semiconductor fuses for rectifier bridge. (d) control circuit fuses (e) capacitor circuit rectifier hrc fuses. (f) over-voltage cut-back (g) charger over load / short circuit (h) blocking diode 11. controls and switches followings controls and switches are provided in the system 1 ac input source mccbs with interlocking 2 dc output mccb 3 auto/manual float/boost mode selector switch. 4 float and boost voltage variable potentiometers. 5 manual voltage adjustment potentiometer 6 test push button 7 reset push button 8 battery current adjustment potentiometers 9 heater s power supply switch 12. features the following features are provided in the systems: 10 soft start on dc side 11 class-f insulation for all magnetic 12 automatic voltage regulation. 13 automatic changeover from float to boost and vice versa based on current, drawn by battery. 14 filter circuit to eliminate ripple. 15 charger current limit 16 separate battery path current limit. 17 built-in auto phase reversal of operation. 13. meters f.c. b.c. (i)input voltmeter (i) common (ii) input ammeter (ii) input ammeter (iii) output voltmeter (iii) output voltmeter (iv) output ammeter (iv) output ammeter. battery volt meter battery ammeter earth leakage ammeter 14. indications phase on lamps (ii) output on lamp a)phase on lamps (ii) output on lamp. (iii) charger on float led (iv)charger on boost led. 15. annunciation with audiovisual alarms. (i) ac input mains failure (ii) input phase failure (iii) ac under voltage iv) input phase failure v) rectifier fuse failure vi) output fuse failure vii) filter fuse failure viii) dc under voltage ix) dc over voltage x) charger trip xi) capacitor fuse fail xii) output mccb tripped xiii) charger over load xiv) earth leakage xv) dc earth fault xvi) alarm supply fuse failure xvii)battery low condition. v) rectifier fuse failure vi) output fuse failure vii) filter fuse failure viii) dc under voltage ix) dc over voltage x) charger trip xi) capacitor fuse fail xii) output mccb tripped. note : all the alarms shall be provided through electronic display cards. audio alarm through buzzer, visual indication through 10 mm leds & alarm ackn. / reset and led provision is through push buttons. 16. operating ambient temperature surrounding the panel 00 to 500 c 17. surrounding the panel relative humidity. 0-95% non-condensing 18. panel (i) protective grade (ii) cooling (iii)paint ip 42 natural air-cooled smoke grey of iss-692 shade a) average winding temperature rise over ambient temperature b) insulation class c) insulation breakdown voltage. as per relevant iss. f 3 kv for 1 min withstand. 19. cables 1100 v

CTN :39338082

17 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of office suite software (v2),operating system software (v2),security and protective software including antivirus

State Government

CTN :39577578

17 Mar, 2025 1.00 Crore

Jaipur - Rajasthan

Tender For tender for supply of surgical and disposable item - 3 way stop cock , non pyrogenic and single use, should be leak proof, with smooth movements, 3 way stop cock with extension tube (vein-o extension line) size 10cm (non pyrogenic & single use), 3 way stop cock with extension tube (vein-o extension line) size 150cm (non pyrogenic & single use), abdominal belt, abdominal drain kit (with collection bag 2000 ml size 24, abdominal drain kit, sterile, having drainage catheter and collection bag (2000 ml) (size 16), abdominal drain kit, sterile, having drainage catheter and collection bag (2000 ml) (size 20), abdominal drain kit, sterile, having drainage catheter and collection bag (2000 ml) size 28, abdominal drain kit,sterile,having drainage cather and collection bag(2000) ml size 32, absorbable gelatin sponge 80 x 50x 10mm, absorbable oxidized regenerated cellulose netsize 2 x 3 topical absorbable haemostatic bactericidal property, absorbent cotton wool 300 gm, absorbent cotton wool 500 gm, adult ventilator circuit single water trap, adult ventilator circuit with universal single limb, advance bipolar hand activated probe with 5mm shaft diameter and 35 cm shaft length with 5 mm wide, anti microbial gloves 6.5 inches, anti microbial gloves 7 inches, anti microbial gloves 7.5 inches, apple hunt trocar :- should be single use sterile trocars, have side port , two cannula & one trocar ,5 mm & 10 mm trocar with pyramidal tip, ergonomic design , fascia anchoring thread should be usfda / ce approved, aprin plastic disposable, arterial pressure monitor lines (100 cm long), arterial pressure monitor lines (150 cm long), asepto syringe with transparent bulb sterile, 60 ml, baby kit (cloth set for new bourn babies in summer use), baby kit (cloth set for new bourn babies in winter use), baby diapers pkt. of 5 pcs., band aid (water proof) long, bed paan plastic, bed protective plastic sheet disposables size 120x210cm, blood administration set blood transfusion set, breast pump, barbia three way foleys 22 fr, cannula fixer, care handloom guaze pad ( sanitary pad) pkt. of 10 pcs, carter thomason port closure :- should be carter thomson type port closure system, have pilot guide and suture passer separately, able to use for trocar defects of 5mm - 15mm, suture guide holes should be 180 degree access across each other s, single use , catheter,size 10(foleys ballon catheter sterile,2 way for urinary drainage,single use,)silicon coated natural latex material, catheter,size 16(foleys ballon catheter sterile,2 way for urinary drainage,single use,)silicon coated natural latex material, catheter,size 18(foleys ballon catheter sterile,2 way for urinary drainage,single use,)silicon coated natural latex material, catheter,size 8(foleys ballon catheter sterile,2 way for urinary drainage,single use,)silicon coated natural latex material, ceasarian drape sheet, central line triple lumen with y needle and nitinol guide wire 7fr to 8.5 fr with 15cm to 20cm catheter with tecoflex/polyurathane material, central neck line ? double lumen (antimicrobial coated/ chlorhexidine , silver sulfadiazine coated) central lumen catheter, double lumen) 7 fr, close suction system adult fr-14, close wound drainage device under negative pressure (closed wound suction unit) 10 no, close wound drainage device under negative pressure (closed wound suction unit) 8 no, close wound drainage device under negative pressure (closed wound suction unit) no. 12, close wound drainage device under negative pressure (closed wound suction unit) no. 14, close wound drainage device under negative pressure (closed wound suction unit) size of bellow 800 ml, catheter size 16, close wound drainage device under negative pressure (closed wound suction unit) size of bellow 800 ml, catheter size 18, combined spinal & epidural set latex free disposable pencil point spinal needle 27g , 127.5 mm with grooved transparent hub with centering protective plastic sleeve, touhy needle with black

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Central Government And Public Sector

CTN :39269573

15 Mar, 2025 4.57 Lacs

Baramulla - Jammu And Kashmir

Tender For corrigendum : providing surface protective epoxy painting on miv (main inlet valve) and disaster management system pipeline of uri power house

CTN :39545268

13 Mar, 2025 NA

Bokaro - Jharkhand

Tender For injector, bracket cover, tappet cover opening and fitting,repair of failed greasing system, fabrication of engine sump protective guard and repair of transmission line steel tubes and rep. of hydraulic tank and rhs mudguard of d/10352 of akkocp.

Central Government/Public Sector

CTN :39104619

04 Mar, 2025 50.93 Lacs

Pune - Maharashtra

Tender For corrigendum : 85923 repair / maintenance of vcb acb, protective device, ht ug cable, ht distribution system, transformer and other miscellaneous ht work of elect supply in new chsc and other connected area of age e/m-ii under ge (s) pune

CTN :39456807

17 Mar, 2025 NA

Poonch - Jammu And Kashmir

Tender For supply of rear brake pad , front disc pad , cover assembly , disc clutch , knuckle kit , system protective valve , sump heater 24v , s or a of socket lh , s or a of socket rh , relay 24v , steering pump , side indicator , clutch disc , cover assembly clutch , bearing clutch release , jalwa horn , jalwa horn relay , dual bake valve

corporations/Associations/Others

CTN :39334117

04 Mar, 2025 19.69 Lacs

Surat - Gujarat

Tender For tender for procurement ofconsumables dental items (third attempt). - 1, 50, m1, -, 100.00, airotor diamond burs, packet, 25/004/0004/00/0/0/0, 26.00, 5, 50, m1, -, 100.00, articulating paper-each strip of 24 slips (12 blue and 12 red), box, 25/004/0009/00/0/0/0, 10.00, 9, 50, m1, for dental use, 200.00, calcium hydroxide powder (for dental use), bottle, 25/004/0013/00/0/0/0, 5.00, 13, 50, m1, for dental use only 1pkt 400gm powder and 400ml liquid, 100.00, complete kit of all diff. matrixes system, kit, 25/004/0020/00/0/0/0, 2.00, 17, 50, m1, -, 100.00, endodontic post system, kit, 25/004/0027/00/0/0/0, 5.00, 21, 50, m1, -, 100.00, gi sealant varnish,cavity varnish, protective coating,bottle-30ml, bottle, 25/004/0031/00/0/0/0, 3.00, 25, 50, m1, high strength, fast setting. 15gm powder and 8 to 10 ml liquid, 400.00, green stick compound green tracing sticks-packet of 10 nos., packet, 25/004/0036/00/0/0/0, 10.00, 29, 50, m1, -, 100.00, heat cure acrylic (pow and liq) pink, for dental use only, packet, 25/004/0041/00/0/0/0, 5.00, 33, 50, m1, -, 100.00, nickel titanium endodentic files 15-40, packet, 25/004/0055/00/0/0/0, 200.00, 37, 50, m1, -, 100.00, plaster of paris for dental use 1 bag of 5kg, bags, 25/004/0060/00/0/0/0, 2.00

Protective Wear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others