Web Analytics Made Easy - StatCounter

Pump Foundation Tenders

Get complete information related to latest Pump Foundation Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pump Foundation Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pump Foundation Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :39626136 Due date: 21 Mar, 202521 Mar, 2025 1.92 Lacs
Tender For repairing of pump house and pump foundation of chp/ workshop and miscellaneous civil work at chp of ncph sub area.

Central Government/Public Sector

CTN :39615618 Due date: 17 Mar, 202517 Mar, 2025 1.12 Lacs
Tender For providing of pump foundation at golden pahari under lodna area

corporations/Associations/Others

CTN :39625056 Due date: 28 Mar, 202528 Mar, 2025 31.05 Lacs
Tender For supply of ready mix concrete within 5 km from site by fiorie including pouring by concrete bucket hydra shall be provided by department in foundation sub structure super structure at rob xing no 115 special on bhatni bazar and bhatni bypass

CTN :39626105 Due date: 21 Mar, 202521 Mar, 2025 NA
Tender For providing concrete foundation and chemical earth pits for 05 nos. of switches of po office and singh nagar sub-station under dhori (k) colliery

Central Government And Public Sector

CTN :39566607 Due date: 17 Mar, 202517 Mar, 2025 14.89 Lacs
Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Central Government/Public Sector

CTN :39527490 Due date: 21 Mar, 202521 Mar, 2025 44.51 Lacs
Tender For construction of community centre at murgaghutu and kadma village under csr - clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared , earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth 1 point 5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1 point 5 m as directed by eic , filling available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1 point 5 m , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete , providing and laying in position cement concrete of specified grade including the cost of centering and shuttering all work up to plinth level is to 1 is to 3 is to 6 ratio 1 cement is to 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size , providing and laying in position specified grade of reinforced cement concrete including the cost of centering shuttering finishing and excluding cost of reinforcement all work up to plinth level 1 is to 1 point 5 is to 3 ratio 1 cement is to 1 point 5 ratio coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth and string courses fillets columns pillars piers abutments posts and struts etc above plinth level up to floor five level including cost of centering shuttering finishing and excluding cost of reinforcement 1 is to 1 point 5 is to 3 ratio 1 cement is to 1 point 5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , reinforced cement concrete work in beams suspended floors roofs having slope up to 15 degree landings balconies shelves chajjas lintels bands plain window sills staircases and spiral stair cases above plinth level up to floor five level including the cost of centering shuttering finishing and excluding cost of reinforcement with 1 is to 1 point 5 is to 3 ratio 1 cement is to 1 point 5 ratio coarse sand zone iii ratio 3 graded stone aggregate 20 mm nominal size , brick work with common burnt clay fps non modular bricks of class designation 7 and half in foundation and plinth in cement mortar 1 cement 6 coarse sand , brick work with common burnt clay fps non modular bricks of class designation 7 and half in superstructure above plinth level up to floor v level in all shapes and sizes in is to cement ratio mortar 1 is to 6 ratio 1 cement 6 coarse sand , half brick masonry with common burnt clay fps non modular bricks of class designation 7 and half in superstructure above plinth level up to floor v level cement mortar 1 is to 4 ratio 1 cement is to 4 coarse sand , supplying and stacking or filling for soak pit at site over burnt jhama brick aggregate 90 mm to 45 mm , cement concrete flooring 1is to 2 is to 4 ratio 1 cement is to 2 coarse sand is to 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc complete 40 mm thick with 20 mm nominal size stone aggregate cement make nuvoco lafarge or ultratech or acc or as per direction of eic , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500 d or more make sail tata jindal , 15 mm cement plaster on the rough side of single or half brick wall of mix is to 1 is to 6 ration 1 cement is to 6 fine sand ratio rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratec

Central Government/Public Sector

CTN :39171274 Due date: 06 Mar, 202506 Mar, 2025 NA
Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

CTN :39550467 Due date: 17 Mar, 202517 Mar, 2025 NA
Tender For supply, erection, testing and commissioning of 45 m3/hr (10000 gph uk) or higher capacity hscf pump set with suitable capacity motor with rating 415v, 5ohz, 3 phase along with starter panel, pum p set specifications shall conform to pcee/grc's latest specification and as per site requirement annexure by consignee. the cost is inclusive of dismantling, making concrete foundation work, supply of suitable size foundation bolts and all requisite materials. location: jhinkpani pump house under ssee(g)/dps. [ warrant y period: 30 months after the date of delivery ]

CTN :39525354 Due date: 05 Mar, 202505 Mar, 2025 1.30 Lacs
Tender For construction of 02 (tswo ) nos of pump foundation in underground at 7d / 51l of bogra r -vi and 0d / 51-52l of n k seam at pure searsole colliery under satgram sripur area.

CTN :39518564 Due date: 11 Mar, 202511 Mar, 2025 5.36 Lacs
Tender For electrical repairing / re-wiring and changing of electrical items of 9.0 office, konar river side pump house (2 nos.) and civil office under kathara colliery. - wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduct, with piano type switch, phenolic laminated sheet, suitable size m.s box and earthing the point with 1.5sq.mm frls pvc insulated copper conductor single core cable etc. as required. group a , supplying & erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 meters long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60cm), 7/4.00 mm dia g.i stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 oarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling as required. 2. group b , wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduct, with piano type switch, phenolic laminated sheet, suitable size m.s box and earthing the point with 1.5sq.mm frls pvc insulated copper conductor single core cable etc. as required.3. group c , supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. (for light plugs to be used in non residential buildings)., supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (for light plugs to be used in non residential buildings)., supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 1). 5/6 amps switch, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 2). 3 pin 5/6 amps socket out let, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 3). 15/16 amps switch, supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 4). 6 pin 15/16 amps socket out let, supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., supplying and fixing followings way, single pole neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, completed with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (but without mcb/rccb/isolator).i) 2 + 4 way / 8 way, double door, supplying and fixing 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inclusive for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. i) single pole and neutral., wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc consult as required. i). 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire, wiring for circuit / sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class pvc consult as required. ii). 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire, wiring f
 Loading, Please wait...

Connect us via What's Up