Web Analytics Made Easy - StatCounter

Pump Oil Tenders

Get complete information related to latest Pump Oil Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pump Oil Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pump Oil Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

corporations/Associations/Others

CTN :39112523 Due date: 05 Feb, 202505 Feb, 2025 NA
Tender For tender of maintenance of fire vehicles and supplying materials for fire department - pump impaller, pump bearing set, pump shaft, mechanical seal, delivery valve, water cum foam monitor, butterfly vlve 125 mm, butterfly vlve 100 mm, hose reel 30 mtr 25 mm, light bar with p a system, bearing set for pto, oil seal set, flange of pto, propeller shaft, joint cross, danti chillam, center bearing, 50 mm ball valve, 25 mm ball valve for 3 pieces, high pressure hose reel, high pressure gun, bearing set, crank shaft, connector rode, o ring set, unloaded valve, bearing set pto, oil seal set, gasket set, danti chillam, center bearing, pro rubber foundation, super structure work, pipeping work, electrification work, painting work, seat lining work, pump oil, pto oil, new shutter fabrication work with lock, general pump and pto service labour charge (with out material), emergency visit and repairing labour charge(with out material)

CTN :39129710 Due date: 19 Feb, 202519 Feb, 2025 NA
Tender For supply of fuel flexible pipe , pipe outlet oil , fuel feed pump , oil filter , fuel filter , avr , on off cock , spark plug , fuel inlent pipe , fuel cock

CTN :39128863 Due date: 19 Feb, 202519 Feb, 2025 5.00 Lacs
Tender For supply of self starter assy , turbocharger assy , oil filter , fuel filter , air filter , fuel flexible pipe , main bearing , packing kit , alternator assy , big end brg cell , cylinder head with valve , heating rod , kerosene heater wick

CTN :39084818 Due date: 14 Feb, 202514 Feb, 2025 1.60 Lacs
Tender For supply of hamam dasta , soup bowl , sr 998 solution , raling brush , paint brush , welcome bd , brown sheet , glass bowl med , pvc collar , floor mat , knob , fuel indicator , aluminium pipe , cast iron lid , central heating plates , cotton , niwar , bel crow , blade , dth adopter , washing mach gear box repair , stabilizer repair , invertor repair

CTN :39084870 Due date: 14 Feb, 202514 Feb, 2025 45.0 Thousand
Tender For supply of self regulating pipe heating cable , automatic fuel nozzle , neoweld co2 pre heater regulator and flowmeter , zerust vc2 2 no rust vapor capsule , electrolite

CTN :38783037 Due date: 29 Jan, 202529 Jan, 2025 NA
Tender For bid to ras tender for supply of nut lock(ispl plate-3.01) , washer (plate-3.01 oblique 14) , hose assy(ispl plate-4.01) , hose case drain , break valve(ispl plate-4.04) , tee (price list page 3 oblique 40) , gaitor(ispl plate-5.04) , adopter(ms sl no-76) , rubber beading (ispl plate-6.01) , wiper motor with blades(pr sl-171) , adapter , control lever assy , direction indicator light(ispl plate-9.01) , light , head light (ispl plate-9.01) , horn(ispl plate-9.02) , hour meter(ispl plate-9.03) , dummy switch , front wiper switch , dual indictr hyd clog (fuel fltr) , hydraulic oil temp sensor(pr sl-292) , water temp gauge(ispl plate-9.03) , dual indicator bty , heater glow , dual indicator water temp , oii pressure , fuel gauge (ispl plate-9.04) , 4 way ignition key switch(plate-9.04) , left right indicator switch(plate no-9.04 , sl no-9 , relay (price list sl-276) , flasher unit(ppl sl-280) , element filter(ispl plate10.2) , hose assy , adapter(ispl plate-10.4) , adaptor (ispl plate-10.4) , hose assembly , connector(ispl plate-12.1) , hose assy , hose , suction hose of hydraulic pump(plate-10.5) , hose , hose(ispl plate-10.5) , top tank cap (ispl plate-2.01) , raditor mounting pad top(pr sl-309) , radiator drain hose(plate-2.02 oblique 10) , rad mounting rubber pad(pr sl-319) , intake line hose assy , return line hose , bend hose , rubber hose(plate-2.04) , air cleaner hose , pump coupling (size 10 inch for sae4) (ms sl no -5) , mounting bracket , air cleaner clamp(ispl plate-2.04 , seal kit(plate-10.11) , adapter(ispl plate-10.12) , hose , hose assembly , suction hose charge clamp (ispl hyd circuit) , bifurcation pipe(sr no-482) , feed pipe , hose assy , hose assy , o ring , bracket assy , pipe assy(plate-11.3 oblique 03) , pipe assy(p-141) , pipe assy(p-141) , pipe assy , pipe assy , union with o ring , pipe assy , pipe assy , o ring , clevis(ispl plate-12.1) , pull cable loader arm (ppl sl-601) , sp bearing , bushes cabin lift cyl , bush(ispl plate-14.2) , arm cylinder seal kit , bush , radiator assy (price list sl-320) , rubber mat , battery cable +ve(plate-9.10) , battery cable -ve , earth wire (ssl os ser no 216) , heating relay(plate-9.14) , main shaft(plate-3.01) , cover plate(ispl plate-3.01) , sleeve(ispl plate-3.01) , hex nut locking(ctlg plate-3.01) , sleeve (ispl plate-3.01) , lock washer(ispl plate-3.01) , hex head screw m8x20 (ppl sl-13) , bearing (ispl plate-3.01) , taper bearing small(ispl plate-3.01) , spacer(ispl plate-3.01) , ball bearing (62102ks) , circlip , o ring , circlip(pr sl-29) , oil seal (ssl os sl no 60 & pl sl no 30) , screw allenscrew allen , banjo assembly , pipe assy , hose assy , hose assy , hose assembly(ispl plate-4.02) , tee adaptor(sr no-59) , hose assy , solenoid brake valve , clamp(sr no-66) , screw hex(sr no-66) , tee-union , hex screw , washer plain , hex nut m10(sr no-84) , nut hex m8(ispl plate-5.04) , dowel special pin(ispl plate-5.04) , ball joint (os sl no-90) , auxillary cable(ispl plate-5.04) , rubber bush(pr sl-115) , adaptor(sr no-116) , rubber pad(plate-6.01) , front glass(plate-6.01) , rubber bush (front cab)(pr sl-127) , cab mtg bracket , circlip external , screw hex m8 , washer plain m8 , panel board lh (ispl car & rops) , panel board rh(ispl plate-6.03) , console lh , plate insert lh , plate insert rh , rear side panel lh( ispl cab trim) , rear side panel rh (ispl cab trim) , fan (ispl- cab trim) , front door glass (os sl no-133) , cab lift pump(plate-4.05) , hose assy , connector(plate-2.03 oblique 3)hose clip , jubilee clip , adapter-cablift pump (ispl& price list) , dowty seal(pr sl-186) , dowty seal(pr sl-187) , seat assy(ispl plate-6.04) , handle holder lh , plug , sight glass , dowty seal(pr sl-229) , rubber cap(ispl plate-8.03) , special bolt door (ispl plate-8.02) , m8 big washer , internal light with bulb (cabin light) , fan swtch , work light switch , cabin harness for skid steer(plate-9.05) , chassis harness for skid steer loader , dash board harness

CTN :39087211 Due date: 04 Feb, 202504 Feb, 2025 NA
Tender For mudhalvarin grama salaigal membattu thittam mgsmt 2025-26 phase- i package no. tn05-02 3 nos in oddanchatram block of dindigul district - name of the work : 1. upgradation of the road from veeralapatty - velur bt road km 0/0 - 1/060 (r 102)estimate amount : rs. 35.23 lakhs, a. construction work clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. etc. comp., km 0/0 -1/060, earth work excavation from borrow pits for filling in all classes of soil except sand and hard rock etc with initial lead and lift for raising and widening the existing road sidedrain etc, complete.as per ss20a, km 0/0 -1/060, providing and laying spreading and compacting graded stone aggregate to wet mix macadam(wmm) specification including premixing the material with water at omc in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete., km 0/0 -1/060, providing and laying of prime coat using emulsion at the rate of 7 kg per ten square meter over the wmm surface preparatory to another bituminous construction over it.. including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification., km 0/0 -1/060, providing and laying tack coat over wmm surface(treated with primer) using 2.5kg of bitumen emulsion rs-1 for 10sqm for preparatory to another bituminous construction over it including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification.., km 0/0 -1/060, bituminous concrete 25 mm thick using cmp (grade-ii) providing and laying bituminious concrete to 25mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of vg30/vg40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t cmp with bitumen boiler, tipper trucks,paver finisher/9m

CTN :39087284 Due date: 04 Feb, 202504 Feb, 2025 NA
Tender For mudhalvarin grama salaigal membattu thittam mgsmt 2025-26 phase- i package no. tn05-04 3 nos in oddanchatram block of dindigul district - name of the work : 1. strengthening of the road from vadamadurai - oddanchatram road to thippampatty km 0/0 - 1/550 (r 131)estimate amount : rs. 55.40 lakhs, a. construction work clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. etc. comp., km 0/0 -1/550, earth work excavation from borrow pits for filling in all classes of soil except sand and hard rock etc with initial lead and lift for raising and widening the existing road sidedrain etc, complete.as per ss20a, km 0/0 -1/550, picking the existing worn - out wbm / bt surface using 5 - 10 cm thick including allcost andconveyance of all materials and all labour charges etc complete, km 0/0 -1/550, providing and laying spreading and compacting graded stone aggregate to wet mix macadam(wmm) specification including premixing the material with water at omc in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete., km 0/0 -1/550, providing and laying of prime coat using emulsion at the rate of 7 kg per ten square meter over the wmm surface preparatory to another bituminous construction over it.. including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification., km 0/0 -1/550, providing and laying tack coat over wmm surface(treated with primer) using 2.5kg of bitumen emulsion rs-1 for 10sqm for preparatory to another bituminous construction over it including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification.., km 0/0 -1/550, bituminous concrete 25 mm thick using cmp (grade-ii) providing and laying bituminious concrete to 25mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of vg30/vg40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roll

CTN :39087310 Due date: 04 Feb, 202504 Feb, 2025 NA
Tender For mudhalvarin grama salaigal membattu thittam mgsmt 2025-26 phase- i package no. tn05-06- 2 nos in oddanchatram block of dindigul district - name of the work : 1. upgradation of the road from k.keeranur - kallimandayam road to perumal karadu road. km 0/0 - 0/870 (r 439)estimate amount : rs. 30.37 lakhs, a. construction work clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. etc. comp., km 0/0 -0/870, earth work excavation from borrow pits for filling in all classes of soil except sand and hard rock etc with initial lead and lift for raising and widening the existing road sidedrain etc, complete.as per ss20a, km 0/0 -0/870, providing and laying spreading and compacting graded stone aggregate to wet mix macadam(wmm) specification including premixing the material with water at omc in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete., km 0/0 -0/870, providing and laying of prime coat using emulsion at the rate of 7 kg per ten square meter over the wmm surface preparatory to another bituminous construction over it.. including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification., km 0/0 -0/870, providing and laying tack coat over wmm surface(treated with primer) using 2.5kg of bitumen emulsion rs-1 for 10sqm for preparatory to another bituminous construction over it including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification.., km 0/0 -0/870, bituminous concrete 25 mm thick using cmp (grade-ii) providing and laying bituminious concrete to 25mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of vg30/vg40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t cmp with bitumen boiler, tipp

CTN :39087358 Due date: 04 Feb, 202504 Feb, 2025 NA
Tender For mudhalvarin grama salaigal membattu thittam mgsmt 2025-26 phase- i package no. tn05-01 in oddanchatram block of dindigul district - name of the work : 1. strengthening of the road from dindigul - mysore road to lakkaiyankottai km 0/0 - 0/800 (vpr 63)estimate amount : rs. 28.67 lakhs, a. construction work clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. etc. comp., km 0/0 -0/800, earth work excavation from borrow pits for filling in all classes of soil except sand and hard rock etc with initial lead and lift for raising and widening the existing road sidedrain etc, complete.as per ss20a, km 0/0 -0/800, picking the existing worn - out wbm / bt surface using 5 - 10 cm thick including allcost andconveyance of all materials and all labour charges etc complete, km 0/0 -0/800, providing and laying spreading and compacting graded stone aggregate to wet mix macadam(wmm) specification including premixing the material with water at omc in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete., km 0/0 -0/800, providing and laying of prime coat using emulsion at the rate of 7 kg per ten square meter over the wmm surface preparatory to another bituminous construction over it.. including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification., km 0/0 -0/800, providing and laying tack coat over wmm surface(treated with primer) using 2.5kg of bitumen emulsion rs-1 for 10sqm for preparatory to another bituminous construction over it including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification.., km 0/0 -0/800, bituminous concrete 25 mm thick using cmp (grade-ii) providing and laying bituminious concrete to 25mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of vg30/vg40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the r
 Loading, Please wait...

Connect us via What's Up