Latest pvc adapter Tenders | Government pvc adapter Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38604274

23 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For supply of flanged end fitting straight (with rubber gasket and 4 sets. of stainless steel fasteners of size m6 x 25 mm length, flat washer - 2 nos., 1 spring washer - 1 no., & nut - 1 no.) suitable for conduit size nw 70 as per rdso specification no. rdso/pe/spec/ac/0138-2009 (rev.1), annexure -a, table a-12. s.no 1 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38519150

08 Jan, 2025 16.02 Lacs

Alipurduar - West Bengal

Tender For supply of hardware fittings for transmission lines - compression dead end for lapwing acsr conductor , grading ring for lapwing acsr conductor , corona control ring for lapwing acsr conductor , arcing horns for lapwing acsr conductor , rigid spacer for jumper suitable for acsr lapwing conductor , jumper cone for acsr lapwing conductor , flexible copper bond , mid span compression joints , suspension clamps assembly , pg clamps , arcing horns for acsr twin fittings , anchor shackle , pg clamp , single suspension 220 kv hardware fitting , 220 kv single tention hardware fitting , 220 kv double tention hardware fitting , repair sleeve for acsr zebra , arcing horn 220kv single tension , arcing horn 220kv single suspension , dead end assessembly , jumper cone suitable for acsr zebra conductor , link plate suitable for 220kv single zebra

CTN :38184997

20 Dec, 2024 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of sector filter 20a ref 20eq1 , air filter , buzzer kpeg755 6-28v cont+imp , et200s tete de station , temporised relay , scsi terminal trip , relay 2i10 b1 115 v 50/60hz , rj45 ethernet switch , buzzer 2 tons , track ball , converter 16 80 vdc / 24vdc , gasket 278x232x3 fibre , screw chc m8x25x25 cl 8-8 stf33.02/v002 , guide ring , gasket 278x232x3 fibre , friction half-ring 180x25 cusn12p , glyd ring t180-159-8.1 + o-ring 158.12x7.00 , scraper ring , scraper ring 88nbr101 , o-ring 391.00x7.00 20a8 , o-ring 9.50x2.65 20a8 , o-ring 90.00x5.30 20a8 , o-ring 177.50x5.30 20a8 , o-ring 203.00x5.30 20a8 , o-ring 462.00x7.00 20a8 , turcon excluder seal 5 90-102.2-8.1 + o-ring 94.84x3.53 , gasket 376x404x2 stainless steel , o-ring 16.00x1.80 20a8 , o-ring 118.00x5.30 20a8 , gasket 295x333x2 asbestos-free fibre+elastomer , guide ring 90-95-15 , screw h m8-50/50 stainless steel , lock washer d10 , white led , o-ring d 73x 3.55 , o-ring 94x3 , o-ring 92x4 , o-ring 210x5 , o-ring 62 , 87x5 , 33 , o-ring 7 , 5x1 , 8 , o-ring 20x2.65 , o-ring 22 , 4x2 , 65 , o-ring 50x2 , 65 , inside flange , outside flange , hoisting cables assembly , downhaul cable , nord-lock wash 8 , nord-lock wash 12 , cpu 317 2dp , 16 on/off input module 24 v , output module sm322 , 16 output on/off module 24v/48v , 8 input analog module , memory card 512ko , guide ring dfa , screw h m16x140x44 z5cnd17-04-01 , screw rls m8x12x12 , fuse 0 , 4a ha22 , fuse 0 , 63a ha22 , fuse 1 , 6a ha22 , fuse 2 , 5a ha22 , fuse 30a ha32 , fuse 0a25 ha39 , fuse 16a ha39 , screw h m 8x25x25 8.8 b198 , screw h m10x35x35 a4l-80 , screw h m16x50x50 a4-70 b197 , stainless steel lock tab washer dn8 , washer m6a4l-80 , capacity screw for ss pipe de 10.2 , snort. mast fitting , lock tab washer , threaded wire clamp d3-4 , closed cable holder chain , screw fhc-90 m8x16x16 stainless steel a4l-80 , threaded rod m16x1000 d6.6 , slotted set screw , cylinder end-fitting brake , slide holding screw , nut , slide holding screw , grooved washer diam.17x30 , bumper , adjusting shim 487372 , adjusting shim 487373 , adjusting shim 487374 , fitted screw , steel safety washer de24 , 8 analog module , stainless steel cable 7x19 d 3 , screw h m10x30x30 steel cl 8.8 , bush ruch de10 , 2 , bush tightness ruch , locknut m60x2 , screw h m 14x90x34 8-8 b198 , screw hm16 110/38 stainless steel , screw h m 20x80x46 8.8 b198 , screw h m8x100x22 8.8 , screw h m4x10x10 , screw hm8-20/20 , screw chc m12x50x50 cl8-8 , screw chc m 8x40 ss a4 b197 , nut h m 24 12 ph b199 , nut h m 24 steel cl8-8 , blind nut m16 z6cnt18 10 , screw h m16x70x38 cl 8-8 , screw h m24x80x54 steel cl. 8.8 , nut h m20 cl8 zn-bi , chromated nut h m 16 cl8 , screw h m 16x55x38 steel cl 8.8 , screw h m14x40x40 inox a4l-80 8.8 , nut h m10 steel cl 8.8 , nut h m14 ss a4l-80 , nut hm 5 ss a4l-80 , chromated nut hh m 6 8 , cylindrical pin 12-40-c1 , cylindrical pin 12x40-c1 , cylindrical pin 8x30-c1 , guiding part , guiding strap e/gt series ptfe

CTN :38292940

18 Dec, 2024 NA

Dehradune - Uttarakhand

Tender For corrigendum : supply of non expendable medical item - apparatus oxygen concentrator provided 95 percent o2 purity at 5lpm , cylinder oxygen o2 623 ltr with bull nose fitting valve painted black end empty for , cylinder oxygen bull nose fitting fine adjustment valve with pressure gauge and bobbin flow meter with double walled tube for components , laryngoscope adult complete for components , laryngeal mask airway large medium small , nebulizer electric , outfit resuscitation ambu mk iii complete with oxygen reservoir attachment patient valve and ambu peep valve , pulse oximeter hand held , syringe and needle destroyer , sphygmomanometer aneroid type 300 mm scale with bandage cuff complete in case for component , digital sphygmomanometer , stethoscope folding with flat diaphragm type chest piece , glucometer , body meter for height measure 300 x 103 x 1040 mm measuring range 100 , electronic adult weighing machine , auriscope fibreoptic light transmission halogen lamp 3v using two a4 size battery complete with siegel attachment and spare lamp for component

CTN :38578815

20 Dec, 2024 66.29 Lacs

Nagpur - Maharashtra

Tender For manufacturing, transportation and erection of combined cabin system for end drive unit of hoist 40 ton cap -2 no on end pier and 12 nos on intermediate piers of radial gate (12.19x4.27m) and electrical fitting inside the end drive of pujaritola proj

Central Government/Public Sector

CTN :38569277

23 Dec, 2024 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of straight metric metal thread end fitting to conduit size nw-36 having thread size m40x1.5 with hexagonal metric lock nut made of nickel plated brass of size m40x1.5 with suitable o-ring and washer confirming to rdso specification no.rdso/pe/spec/ac/0138-2009(rev.1) [ warranty period: 30 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :38569511

24 Dec, 2024 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of straight metric metal thread end fitting to conduit size nw-48 having thread size m50 x 1.5 with hexagonal metric lock nut made of nickel plate d brass of size : m 50 x 1.5 with suitable o-ring and washer confirming to rdso specn. no. rdso/pe/spec/ac/0138-2009 (rev.1), annexure-a, table a-5, s.n o.13. item to be supplied in assembled condition. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :38567719

20 Dec, 2024 NA

Bongaigaon - Assam

Tender For supply of hose pipe polyamide double braids of steel wire, polyurethane, blue colour of high pressure airless paint spray system, id: 1/4 inch 17.5mm, psi: 5500 psi, 380 bar, length 15 mtr along with end fitting in both side. with manufacturer test certificate. make: graco/ployhos/jolly flex.

Central Government/Public Sector

CTN :38568573

20 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of set of ptfe air pipe,id-4mm,od-6mm with end fitting, consisting of steel cone & hex nut on both ends.(working pressure-5.5kgs/cm. square and max pressure 10 kgs/cm square )with steel ni/cd plated two ado pters to suit taper cone and hex nut 8mm metric 1.25 pitch on pipe side and unc taper thread on other side to fi t in to magnet valve ge/bhel.one set consisting of (1) 26"long pipe for bkt-02 nos.(ii)14.5"long pipe for p/c-12 nos.(iii)9.5" long pipe for rev-06 nos. [ warranty period: 30 months after the date of delivery ]

Pvc Adapter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector