Latest radiation monitoring machine Tenders | Government radiation monitoring machine Tenders

State Government

CTN :45680270

16 Jul, 2026 NA

Kheda - Gujarat

Tender For supply of various instruments for chp & bop area of wtps unit 8. - over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller with sensor probe set, make: jayashree, speed setting: 100 to 1000 rpm, 4 imp rev,2no + 2nc,5a @ 240v ac, supply voltage:90-250v ac, sensor probe model: sp 12 b 30*65 10 m, termination: 3 wires dc., chlorine leak detector - single sensor for model no. 5002, range : 0 to 5 ppm of chlorine,make: perfect chloro system, magnesium anode rod, length: 30 cm, diameter:- 1/2 (half) inch., pressure gauge, 0-16 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body : ss316lor suitable, dial :150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge, 0-21 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge dial size 150mm with range 0-10 kg./cm2, temperature gauge, 0 to 160 deg c, bi -metal strip coiled, dial 150mm, +/- 1 percent fsd accuracy, 12mm stem dia, 100mm stem length, ss304 case, neoprene gasket, 1/2 inch npt(m) process connection, 1/2 inch npt (m) adjustable to thermowell, rtd pt 100, duplex, sheath dia. 6 mm, sheath length 150 mm, ag make proximity switch, model: ps 2000d, input power : 24 vdc, proximity dia : m50, sensing dist : 16 mm-25mm, 4 wire type, wire length : 5 mtrs, contact: 1no+ 1nc., pointer puller for pressure gauges, electronic speed switch monitoring unit with indictive sensor probe, 10-100 rpm, 4 digit speed indication, 90-250v ac supply, accuracy : +/-5 percent, calibration 4 imp / rev, 1-20s itd & ntd, ip65, pressure switch ,range 0.6 to 6 kg/sqcm, pressure switch range : 1 to 10 bar, pressure switch, range 1.6 to 16 bar, type : bellow, connection : 1/2" npt, bottom entry, vacuum switch low, (-760 to 0)mmhg, diapragm seal tantalum/monel or better for chlorine service, body-ss316l or suitable, die cast aluminium or better enclosure, accuracy : +/-0.5 percent, process connection:1/2 in. npt(m), 2spdt, ip66, pressure switch, 0.3-1.6 kg/cm2, tantalum/monel or better diaphragm seal, chlorine service, body-ss316lor suitable,die cast aluminium or better enclosure, repeatability : +/-1 percent , process connection : 1/2 in. npt(m), 2spdt, ip66, vacuum gauge, (-760 to 0) mm hg, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m), ip65, pressure gauge 0-6 kg/cmsq, pressure gauge 0-10 kg/cm2, pressure gauge range 0-16 kg/cm2 size 100 mm, over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller

Central Government/Public Sector

CTN :45668152

06 Jul, 2026 NA

Hubli - Karnataka

Tender For supply of microprocessor based electronic speed indicator-cum-recording and energy monitoring system as per rdso specn. no. rdso/pe/spec/emu/0032-2002 (rev.0) with amendment 1-3. make: lax2000e emu of laxven or mrt921 of medha or telpro-dc of aal make for memu coaches complete set consisting of 7 items: (1) energy-cum-speed recorder unit=1 no.(2) tacho generator(with drive pin)=1no. (3) junction box=1 no. (4) signal condition box=1 no. (5) potential transformer=1 no. (6) set of cables 1 set of 3 nos. (7) mounting accessories=1 set [ warranty period: 30 months after the dateof delivery ] ]

Central Government/Public Sector

CTN :45422987

06 Jul, 2026 NA

Hubli - Karnataka

Tender For corrigendum : supply of microprocessor based electronic speed indicator-cum-recording and energy monitoring system as per rdso specn. no. rdso/pe/spec/emu/0032-2002 (rev.0) with amendment 1-3. make: lax2000e emu of laxven or mrt921 of medha or telpro-dc of aal make for memu coaches complete set consisting of 7 items: (1) energy-cum-speed recorder unit=1 no.(2) tacho generator(with drive pin)=1no. (3) junction box=1 no. (4) signal condition box=1 no. (5) potential transformer=1 no. (6) set of cables 1 set of 3 nos. (7) mounting accessories=1 set [ warranty period: 30 months after the dateof delivery ] ]

Central Government/Public Sector

CTN :45610254

26 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of energy-cum-speed monitoring unit (esmon) for 25 kv ac emu & memu as per rdso specn.no.rdso/pe/spec./emu/0032-2002(rev '0')with ammendment no. 1, 2 & 3. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45224961

20 Jun, 2026 NA

Thane - Maharashtra

Tender For corrigendum : supply of speed sensor , angle connector , speed and direction monitoring unit

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45415554

18 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipment - purchase of equipment: dual pump nanofiber electrospinning unit, 1. high voltage power supply output: 0 40 kv, positive & negative polarity, digital control with current limiting and safety interlock2. syringe pump system dual syringe pumps, upgradeable to triaxial (3) or four (4) syringe configuration flow rate range: 0.001 20 ml/hr, compatible syringe size: 1 60 ml3. spinneret system stainless steel needles (18g 30g) capability for single, coaxial and triaxial electrospinning, multi-needle spinning provision4. collector system interchangeable flat plate and rotating drum collectors (different sizes), drum speed: 0 5000 rpm adjustable tip-to-collector distance: 5 30 cm5. environmental control chamber fully enclosed electrospinning chamber, temperature control: ambient 60 c humidity control: 20 80% rh6. control & automation touchscreen / pc-based operation, programmable process parameters real-time monitoring of voltage, flow rate, collector speed, temperature and humidity7. digital interface & data handling advanced digital interface for system control, high data storage capacity for experimental records data export through usb / ethernet8. safety features, fully grounded system door interlock for high-voltage safety emergency stop and overload protection9. accessories & support syringes, needles, grounding cables and collector substrates, on-site installation and user training, operation manual warranty: minimum 2 year

CTN :45363431

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 4 ) for mechanical department - purchase of equipments, slip gauge set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatness / parallelism: 0.5 mstored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes, dc motor type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 poleconstruction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly , bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm,0.8mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45328829

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for cnc lab in mechanical department - list of equipment, hydraulic cylinder double acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic operated directional control valves (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., 3d printerbuild volume(wxdxh) 256 x 256 x 256 mm *shell enclosed (plastic & glass)hot end all-metalnozzle 0.4 mm stainless steel includedmax hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional)build plate compatibility textured pei plate, cool plate, engineering plate, high temperature platemax build plate temperature 100 max speed of tool head 500 mm/smax acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asachamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supportedfilament run out sensor yescontrol board fan closed loop controlauxiliary part cooling fan closed loop controlair filter activated carbon filter - list of equipment, hydraulic cylinder double acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic operated directional control valves (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., 3d printerbuild volume(wxdxh) 256 x 256 x 256 mm *shell enclosed (plastic & glass)hot end all-metalnozzle 0.4 mm stainless steel includedmax hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional)build plate compatibility textured pei plate, cool plate, engineering plate, high temperature platemax build plate temperature 100 max speed of tool head 500 mm/smax acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asachamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supportedfilament run out sensor yescontrol board fan closed loop controlauxiliary part cooling fan closed loop controlair filter activated carbon filter

CTN :45335846

15 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of energy cum speed monitoring unit (esmon) for 25 kv ac emu & memu as per rdsospecn. no. rdso/pe/spec./emu/0032-2002 (rev 0) with amendment no.1, 2 & 3. [ warranty period: 30months after the date of delivery ] ]

Radiation Monitoring Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector