Latest rcc rack Tenders | Government rcc rack Tenders

Central Government/Public Sector

CTN :39880959

22 Apr, 2025 NA

Palakkad - Kerala

Tender For supply of carbide tipped blade chain saw specifications:- 1) conforming standards for the item= en/din/u s/equivalent standards performance parameters 2) carbide chain saw are to be designed to cut through differe nt building materials like timber,metalsheets,frp,pvc etc(not through concrete) =yes 3) type of engine =2- str oke petrol driven, air cooled 4) displacement in cc =75 5) output power= 6.5 hp 6) type of blade= carbide tip ped blade 7) full blade guard with adjustable depth limiter in inches= 0-8 [ warranty period: 36 months after the date of delivery ]

State Government

CTN :39886559

07 Apr, 2025 90.31 Lacs

Noida - Uttar Pradesh

Tender For provide & fixing of road safety item on road between sector-62 and 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar

CTN :39820322

04 Apr, 2025 NA

Amethi - Uttar Pradesh

Tender For supply of safayi item - safayi, wiper, trishul cleaner, harpic, jhadu, phool jhadu, construction of chamber for 100mm sluice plates, construction of chamber for 100mm sluices valve, supplying, conveying and fixing spls. including ea, supplying, conveying and fixing spls. including eart, construction of chamber for 100mm sluice plates, construction of chamber for 100mm sluices valve, laying and jointing pvc pipe. heading, plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using, brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost, construction of chamber for 100mm sluices valve, construction of chamber for 100mm sluices valve

Central Government / Public Sector

CTN :39860473

30 Apr, 2025 NA

Waltair - Andhra Pradesh

Tender For rate contract for manufacture and supply of metal liner conforming to rdso drg. no t- 3740 alt. 7 for use with erc mk-iii flat toe on concrete sleeper suitable for 60kg (uic)/60e1 rails. spe cification: metal liners should conform to irs-t-56-2020 with corrigendum -1. this is a safety item. [ warranty period: 30 months after the date of delivery ]

CTN :39824185

09 Apr, 2025 NA

Khandwa - Madhya Pradesh

Tender For civil construction material and other services supply - notice inviting item rate of various item for maintanance & repair work at omkareshwar, 6mm machine broken aggregate, 10mm machine broken aggregate, 12mm machine broken aggregate, 20mm machine broken aggregate, 40mm machine broken aggregate, river sand, balu sand, moorrum, gobar khad, stone dust, brick open bhatta, black soil, cement isi mark 43 grade, cement isi mark 53 grade, hot rolled hyysd bars isi marked 6mm, hot rolled hyysd bars isi marked 8mm, hot rolled hyysd bars isi marked 10mm, hot rolled hyysd bars isi marked 12mm, hot rolled hyysd bars isi marked 16mm, hot rolled hyysd bars isi marked 20mm, hot rolled hyysd bars isi marked 25mm, plastic paint of approved brand isi marked, iron jaali,angle ,tube,door,window,chamber plate all type including fitting etc, corrugated gi sheet isi mark, acp pannel installation re erection opening etc, painting steel work including material etc, painting rcc work boundary wall etc including material etc, cement brick, red farsi 40mm thk, kota stone 20mm thk, mosaiqe tiles 20mm thk, glazed tiles 6 mm thk, granite 20mm thk, vitrified tiles, mixer machine including fuel operator etc, viberator including fuel operator etc, concrete breaker machine, latrine seat indian, urinal, jcb machine including fuel operatoe etc, distember oil bound of approved brand isi mark, tarpin, centering material complete, paver block 80mm thk, treegaurd, drainage chamber cover cast iron, rcc pipe np3 150mm dia, rcc pipe np3 200mm dia, rcc pipe np3 250mm dia, rcc pipe np3 300mm dia, rcc pipe np3400mm dia, rcc pipe np3 450mm dia, rcc pipe np3500mm dia, rcc pipe np3 600mm dia, rcc pipe np 31000mm dia, rcc pipe np3 1200mm dia, writing work on stone all types, pot hole repair of existing bituminous roads with hot mix bituminous material and aggregates confirming to specifictation 504 including cleaning of surface cutting edges of pot holes patches in desired shape and rolling complete including labour, black stone/material m sand, white cement, whilte lime chuna, oil paint, poclain machine including fuel operator etc, tractor with tralli including fuel operator etc, pvc pipe 6kg 160mm dia, pvc pipe 8kg 160mm dia, pvc pipe 6kg 90mm dia, pvc pipe 4kg 75mm dia, profilce sheet isi mark

CTN :39419323

28 Mar, 2025 NA

Lower Dibang Valley - Arunachal Pradesh

Tender For bid to ras supply of plumbing item - gi bib cock 15 mm , gi pillar cock 15mm , gi ball valves 15 mm , gi union 15 mm , gi reducer 32mm x 25mm , gl nipple 32mm , gi valve 25 mm , gi pipe 15 mm 3 mtr long , gi tee 15 mm , gi socket 15 mm , gi elbow 15mm , gi nipple 15 mm , gi plug 15 mm , pvc socket 50 mm , pvc elbow 110 mm , pvc tee 110 mm , pvc socket 110 mm , pvc pipe 75 mm 6mtr long , pvc elbow 75 mm , pvc tee 75 mm , pvc socket 75 mm , pvc pipe 50 mm 3 mtr long , pvc elbow 50 mm , pvc tee 50 mm , cpvc pipe dia 25 mm 3 mtr long , cpvc socket 25 mm , cpvc reducer 25mm x 15mm , cpvc tee 25 mm , cpvc elbow 25 mm , cpvc tank adopter 25 mm , cpvc tank nipple 25 mm , cpvc union 25 mm , cpvc ball valve 25 mm , cpvc float valve 25 mm , cpvc socket 15 mm , cpvc end cap 15 mm , cpvc bib cock 15 mm , cpvc fta 15 mm , cpvc mta 15 mm , cpvc tee 15 mm , pvc joint socket 15mm , pvc elbow 15 mm , pvc gum 250 ml , connection pipe 15 mm , angle cock 15 mm , thread seal tape , stop cock 15 mm , pvc flexible waste pipe , toilet hand spray , cistern , fastner set of 12 pcs , concrete bit 6mm , concrete bit 8 mm , concrete bit 12 mm , cpvc pipe dia 0.75 inch 3 mtr long , cpvc tee 0.75 inch , cpvc brass elbow 0.75 inch , cpvc socket 0.75 inch , bib cock brass long nose 0.75 inch , cpvc gate valve 1 inch dia , cpvc gate valve 0.75 inch dia , pipe clamp size 0.75 inch , pipe clamp size 1 inch , m seal pv seat solvent 100 ml , cpvc piller cock long 0.75 inch , angle holder , soap stand , towel stand , shower , shower wall mounting , drain jali , steel grip tape insulation , alloy steel self threaded screw 1 inch pkt of 100pcs , alloy steelself threaded screw 0.50 inch pkt of 100pcs , alloy steel self threaded screw 0.75 inch pkt of 100pcs

corporations/Associations/Others

CTN :39825106

28 Mar, 2025 NA

Mumbai - Maharashtra

Tender For auction sale of scrap pipe ms from demolitions / dismantling / testing with ms liner,scrap miscellaneous ms from works / products ms light scrap,scrap from works / products old & used gi sheet,scrap miscellaneous pvc from works / products pvc ventilation duct,scrap from works / products rubber,scrap electrical cable ht xlpe cable copper,scrap welding electrode ms from works / products end bits / cut pieces,scrap furniture wooden,scrap mechanical item,scrap dewatering pump submersible pump sump pump multistage pump, eetc,scrap distribution board ms from enabling works medium in size -,scrap electrical fitting insulatorlight fitting,scrap furniture ms from enabling works broken / dismantled steel almirah- double,scrap furniture ms from enabling works broken / dismantled steel dining table,scrap e-waste ups from demolitions / dismantling / testing medium in size,scrap electrical item exhaust fan,scrap small tools ms from enabling works concrete buckets,scrap electrical item high mast lighting from enabling works medium in size,scrap machines & machine parts ms used old equipments welding machine,scrap pvc water tank from works / products 10000 ltrs,scrap from works / products ms office container 40 feet

State Government

CTN :39811599

12 Apr, 2025 NA

Umaria - Madhya Pradesh

Tender For item supply of precast boundary wall - precast boundary wall - providing of prestressed vertically casted concrete panels (both surfaces should be somoth and having grooves on both faces) of m-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per is 6006:2014 of dia 3mm placed horizontally in full length of panel with prestressed precast concrete column of m-40 grade of size 3000x150x150mm having minimum 7 nos of high tensile steel wire as per is 6006:2014 of dia 6mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm for gl

corporations/Associations/Others

CTN :39801469

02 Apr, 2025 19.60 Lacs

Multi City - Telangana

Tender For repairs to compound wall ,toilets and laying concrete at burning platforms at mukthidham graveyard near sanjeev reddy gardens road and providing fencing around open gym at mg nagar in ward no 133,machabollarum ,alwal circle, ghmc (item no.01)

CTN :39757716

26 Mar, 2025 3.50 Lacs

Bikaner - Rajasthan

Tender For open gym material with installation-, supply & fixing equipment for open gym as per following details. item should be fix properly including e/w & c.c. in m-20 as per requirement., , sit up & pull board double: product dimensions: 1760mm (length) x 1140mm (width) x 660mm (height)., , safe workout area: -2500mm (length) x 1600mm (width)., , the sit up board double made from "c" class gl pipe. center column made from 100mm nb "c" class g.i. pipe., , the main frame is of 25mm nb made from "c" class gl pipe. frp sheet of 3mm thickness is molded on main frame., , the remaining frame of the sit up board is of 32mm nb made from "c" class gi pipe., , the powder coating is done with pure polyester powder paints with 60 to 70 micron thickness., , the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb "c"class welded with m.s. round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness., , supply & fixing equiopment for open gym as per following details. item should be fix properly including e/w & cc. in m-20 as per requirement., , *legg press dimensions:-1840mm (length) x 360mm (width) x 1560mm. (height)., , *safe area-2.8 x 1.4mtr., , *leg press equipment made from "c" class g.l. pipe of different nb. nb stands for norminal bore sizes le., , *internal diameter of pipe in millimeters, , *the center pipe is of 100mm nb made from "c" class g1. pipe., , *the sleeve frame is of 100 dd and of m.s. seamless pipe with thickness 5mm. this sleeve can be disassembled from main frame., , *the bottom support of m.s. round plate of 250 mm & 10mm thick., , the remaining outer frame is of 32nb made from "c" class g.1. pipe., , 2, , the foundation used for fixing is structure and made from center pipe of g.i. of 80mm. nb "c" class welded with m.s., , round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.5. angle of 3 mm thickness and 20mm x 40mm crc. square pipe of 3mm thickness., , *seat & back rest provided are made up of ms deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm., , *the footrests are made from casted aluminum material, having sizes 130mm x 310mm x 5mm thick. with the support, , of 310mm x 130mm x 3mm thick ms plate., , the frame of footrests made up of 25 nb "c" class g.i. pipe. *, , closing caps are made up of high quality fiber reinforced plastic material. *, , *to build structure bushes are used which are made from m.s. seamless pipe of 50mm c.d. and 5mm thickness., , *the pins used are made up of 25 mm sae 8620 bright material., , *the bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand., , *high tensile steel with galvanized nut bolts are used for assembly., , *the cerclips used for assembly are of a24 mm, , 3, , providing and fixing of cross trainer of size not less than 1320mm (length) x 600mm (width) 1750mm (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.l. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 250 mm & 10mm thick. the handle frame shall be made up of atleast 25nb "c" class g.i. pipe. the footrests shall be made from aluminum casting material of size not less than 130mm x 310mm x 5mm thickness and mounted on ms. plate of size 130mm x310rnm x 3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders paints with 60 to70 micron thickness, complete in all respect includig fixing the m. s holdfast in cement concrete to hold the whole structure., , 1, , 4, , providing and fixing of chest press of size not less than 2000mm (length) 710mm (width) x 2200mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pul

Rcc Rack Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others