Latest rcc stand post Tenders | Government rcc stand post Tenders

CTN :39186238

11 Feb, 2025 NA

Baraut - Uttar Pradesh

Tender For design installation and maintenance of educational lab - vocational lab; site preparation; buyer -1. provision of water supply, drainage pipeline for chemistry lab "the scope of work includes the design, supply, and installation of a 3/4 water supply pvc pipeline and a 2 drainage pvc pipeline for the chemistry lab, with both pipelines to be laid below floor level in accordance with the relevant standards. the water supply pipeline will be installed to deliver water to six wash basins located at lab tables, with all necessary piping, fittings, valves, and accessories provided to ensure proper water flow and functionality. the drainage pipeline will be installed for the safe removal of liquids from the wash basins, connecting to the existing drain system in compliance with local plumbing codes. the contractor is responsible for providing and installing all required pipes, fittings, junctions, seals, and ensuring proper slope for the drainage system to ensure it functions without leakage or obstruction. upon completion, the installed systems will be tested for functionality, and the floor will be leveled and prepared for tiling, with tiles installed in accordance with the specified quality standards and design. all materials used must conform to the relevant industry standards for durability and safety." 01 job, 2. installation of taps in chemistry lab wash basins "supply and installation of 2 taps per wash basin, located at each of the lab tables 06 nos. in the chemistry lab. the work includes ensuring correct connections, installation of necessary pipework, and verifying water-tightness and functionality of the taps. all components must be of high quality and suitable for laboratory conditions, ensuring ease of use and long-term durability." 01 job, 3. installation of exhaust fan system for chemistry laboratory "supply and installation of an exhaust fan system within the chemistry laboratory to ensure proper ventilation, facilitate the removal of hazardous fumes, and maintain a safe working environment. this installation shall include secure mounting, electrical wiring, a variable speed controller, and protective grills with all necessary arrangements, equipment and accessories." 02 job 4. provision of 3-phase electrical supply for strength of materials/ engineering mechanics lab "provision and installation of a 3-phase electrical supply from the existing mcb board to the strength of materials/ engineering mechanics lab located on the ground floor. this includes the installation of all necessary electrical cabling (4 sqmm /6 sqmm), 63 amp. 2 nos. & 32 amp. 4 nos., 4 pole individual mcb with box, connectors, and circuit protection devices, ensuring compliance with relevant electrical safety standards. the installation must be capable of supporting the lab's power requirements while maintaining optimal operational efficiency." 06 job 5. construction of foundations for thermal lab equipment "design and construction of reinforced concrete foundations to support 2 units of lab equipment (approximate measurements in meters (0.95 x 0.45 x 0.3) and (1.0 x 0.6 x 0.2)) in the thermal lab on the first floor. the specifications of work may evolve during the course of the project and foundations must be engineered to accommodate the weight and dynamic loads of the equipment while ensuring stability and long-term durability. all excavation, reinforcement, and concreting work must be carried out per the specified structural design, ensuring compliance with relevant building codes and safety regulations." 01 job 6. vibration damping foundations for thermal lab equipment "supply and installation of specialized vibration damping foundations (approximate measurement in meters (1.6 x 0.85 x 0.3)) for the morse test lab equipment in the thermal lab located on the first floor. the specifications of work may evolve during the course of the project and these foundations must be engineered to effectively mitigate vibration and noise caused by the o

CTN :38731270

10 Feb, 2025 95.00 Lacs

Bathinda - Punjab

Tender For corrigendum : providing of custom bid for services -item rate contract for providing materials required for day-today civil maintenance at aiims, bathinda. - acoustical panelling, adhesive for ceramic tiles, adhesive for wood work, aluminium accessories and hardware, aluminium composite panels, aluminium die-cast handles & two paint locking kit, aluminium, extrusion/sections, aluminium fabricator, anchor fastner/dash fastner, anti-termite treatment, back up rod, ball cock, cement, cement: white, clean room wall, panels with/without return air visers, doors/windows etc, clear glass/clear float glass/ toughened glass, concrete additive, cover/spacer llock, curtain rod/ drapery rod/ venetian filindi, ???? ????? / flor spring, door locks, door seal-woolpile weather strip, dour shutters-flush, doors & windows fixtures/fitting, epoxy hooring, extruded polystyrene board, false ceiling- calcium slicate boards & tiles, false ceiling-metal, false ceiling- mineral libre, fire rated doors & frumes, fire rated glass, fire retardant paint, fire seal, fire: dour closures, mortive dead locks, fire: d-type pill handles, fire: hinges,, fire: panic exit devices, fire: seal, fire: sealant, fire: tower bolts, floor hardenu, glass: float & minor, glass for aluminum doors/windows/ structural glazing

CTN :39149552

07 Feb, 2025 3.44 Lacs

Idukki - Kerala

Tender For shg work shed ward 11 - materials, stone for masonry work, through and bond stone size 24 x24 x 39cm, portland cement (53 grade), coarse sand (zone iii), stone aggregate(single size):40mm nominal size, stone aggregate(single size):20mm nominal size, stone aggregate(single size):10mm nominal size, hire charges of concrete mixer0.25 to 0.40 cum with hopper, vibratot (needle type 40mm), solid blocks of size 30x20x20cm, mild steel round bars for reinforcement, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m(2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), fine sand (zone iv), stone aggregate(single size):06mm nominal size, anjili wood scantls, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameledmild steel screws 40 mm, bright finished or black enameledmild steel screws 20 mm, vitreous china orrisa type w.c. pan size 580mm

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

State Government

CTN :39074298

06 Feb, 2025 16.48 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of post harvest structure including pucca storage at erukady aalamaram at t.r.pattinam (central) vp in t.r.pattinam commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement , collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5 , hire charges wall form panel 1250x500 mm , hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip , hire charges m.s.tube 40mm dia , supply of twisted steel / deformed tmt bars fe-500d , supply of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a , supply of bitumen solution primer of approved quality , supply of dehradun white lime , supply of welding by electric plant , supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer , supply of galvanised steel j or l hooks 8mm dia , supply of precoated galvanised iron profile sheet 0.5mm tct , supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists , supply of iron pintels including welded pin , supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer , supply of c.i.pile shoe , supply of m.s.clamps for pile shoe , hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete. , hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete. , hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete. , hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete. , hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et , production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete. , supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :39064287

07 Feb, 2025 35.00 Lacs

Sonbhadra - Uttar Pradesh

Tender For nagar panchayat ghorawal ke ward sankhya 05 wa 06 me kul 05 jagaho par peyajal vyastha hetu 02-02 nag 5000 litter pbc tanki and rcc stand post ke sath jalapurti ka karya

Rcc Stand Post Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government