Latest rcc tree guard Tenders | Government rcc tree guard Tenders

State Government

CTN :39575643

12 Mar, 2025 4.37 Lacs

Kangra - Himachal Pradesh

Tender For tender for repair and maintenance of road from security post to rcc culvert by providing of soiling cement concrete topping and raising of heifght of existing protection wall to prevent over topping of water at intake of khauli power house

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

CTN :39546662

20 Mar, 2025 10.00 Lacs

Chatarpur - Madhya Pradesh

Tender For inviting rates for construction material supply for financial year 2025-26 - inviting rates for construction material supply for financial year 2025-26, cement opc 43 grade beg acc,altratech,mycem 50 kg, cement opc 33 grade bed acc,altratech,mycem 50 kg, steel 415 grade rod 8 mm, steel 500 rod 10 mm,12 mm, 16 mm, open bhatta brick, chimany brick 1no, ken sand, stone aggragate 12.50mm, stone aggragate 20mm, stone aggragate 40mm, stone dust, stone dust with speading roller compection, white metal, hard moorum, hard moorum with speading with compectio, steel centering, column centering of steel, ply 20mm centering, soil pipe 100mm dia 6 kg, soil pipe 150mm dia 6kg, r.c.c hume pipe n.p3 150mm dia, r.c.c hume pipe n.p3 200mm dia, r.c.c hume pipe n.p3 300mm dia, r.c.c hume pipe n.p3 450mm dia, r.c.c hume pipe n.p3 600mm dia, r.c.c hume pipe n.p3 1000mm dia, pvc pipe 6 kg 65mm dia, pvc pipe 6 kg 80mm dia, pvc pipe 6 kg 100mm dia, pvc pipe 6 kg 150mm dia, lime stone, yellow soil, geru soil, oil brand distemper, enamel paint, oil paint, tarpeen, kuchi fruss, paint bruss 80mm, 125micron plastice sheet, fencing wire gi barbed wire, fencing jali bended mess gi, chain link jali gi, ms angle channal belding completed, gi sheet kamdhenu isi mark, wc sheet 580 indian, urinal sheet corner, hinged sink, glased tile, flas door 1st class 40mm, steel door window, welded section frebrication, electrical pole 1 section, mixer machine with deasul complete, plate vibreter with deasul, niddle vibretor with deasul, water tanki syntex, water tank rcc, rcc ring dust bin 1000mm and 1.0m height, marbal tile 12mm thick, granite stone 25mm, water supply fitting, bid cock and brass pvc, jcb machine with deisel driver on rent, lnt poklend machine with deisel driver on rent, tector trolly with deasul, junrator with deisel, putty 10 kg bag, rabber mold paver block m30 60 mm thick, cement paver block m30 80 mm thick, stenless steel with complete fitting work, channal iron, gi sutter, cylinderical roller with deasul, rcc tree guard name plate with colour, steel tree guard complete name plate with colour, masonary stone 100no, black granite sign board with cutting writing and fixing work, ms hollow pipe rectangular, concrete work m2 with 20mm matal with campaction curing completed, dulex ,asian enamel paint calour 2coat, black cotton soil, skill mistri, rcc flower pot rectangle with colour 50litre, water tanker with deasul, handpump platform with completed work as per phe manual standard design, distemparing colour washing with lime 2 coat, rcc chair three seater, red sand stone 35 mm thick, pvc fall ceiling panelling work complete, pvc wall panelling work complete, wpc doors 35 mm thick, aluminium framed window triple sliding with glass, aluminium framed window double sliding with glass, retro reflective sheet including writing with fitting complete, rcc wooden concrete chair 3 seater, rubber mold paver block m 30 of 100 mm, acp wooden colour, red sand stone 40 mm thick, red sand stone 30 mm thick, 18 mm ply 4 fit x 8fit century, black cotton soil including spreading, fevicol, keel 2 inch, keel 1 inch, white mica, coloured mica, high glossy mica, providing 2 by 2 fall ceiling, 12 mm glass with fitting, 8 mm glass with fitting, aluminium patition complete, putty 2 mm thick complete

Central Government/Public Sector

CTN :39171274

06 Mar, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

State Government

CTN :39517378

20 Mar, 2025 NA

Sepahijala - Tripura

Tender For jjm works under sepahijala district / sh extension of fhtcs along with construction of cement concrete platform , g.i. post including necessary fittings attached with swtp srimantapur under kathalia r.d. block with in the jurisdiction

State Government

CTN :39507521

07 Mar, 2025 7.83 Lacs

Kozhikode - Kerala

Tender For earth work in excavation random rubble masonry solid block masonry dry rubble without concrete fencing with angle iron post structural steel work rcc steel reinforcement for rcc work centering and shuttering plastering painting

Central Government/Public Sector

CTN :39281838

03 Mar, 2025 1.08 Crore

Wani - Maharashtra

Tender For corrigendum : shifting of security check post along with integrated shed and concrete approaches at mungoli oc mine under mungoli sub area of wani area.

CTN :39448031

03 Mar, 2025 1.66 Lacs

Kaithal - Haryana

Tender For installation of open gym in park behind dc residence in ward no.-10 at mc kaithal(3l5bmh28) d-plan 2024-25 (recall) - pull chairproviding, designing and fixing of pull chair of size 2500 x 800 x 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber at top end. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmentally friendly. bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc, air walker providing, designing and fixing of air-walker of size 100 x 550 x 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zincprimer paint to be applied at all welding points prior to finishing. base plate cover shall be made up of virgin lldpe plastic by rotational moulding with minimum 4.00mm thickness u v resistant and colour as approved by engineer-in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edge to prevent impact and injury.maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self-lubricated to be approved by engineer in charge. equipment to be fitted with inbuilt limiters. the equipment should be fixed on ground with concrete ofminimum strength m25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of engineer-in-chargeregarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc., arm wheel providing, designing and fixing arm wheel in a pair of size 850 x 800 x 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micronthick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled seal

State Government

CTN :39450943

06 Mar, 2025 2.50 Lacs

Hooghly - West Bengal

Tender For construction of concrete road from badanganj post office to murali dalal shop,activity id 40246089

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

Rcc Tree Guard Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government