Tender For bid to ras supply of table mic , roviding control expansion with 8 logic inputs , speakers , amplifier , active led , 55 inch 4 k digital display , 32 inch touch full hd display , network video endpoint for q sys ecosystem , poe toch screen controller , switch and control systemport network switch preconfigured for qsys audio video , ptz camera systemvideo conference camera system , digital podium , cable and connectors , installation and commissioning table mic polarity/ positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output xlr connector/ type - electret condenser/ frequency response 50 17000 hz output impedance - 180 / output configuration - active balanced/ sensitivity - @ 1 khz, open circuit voltage/ cardioid 30 dbv/pa/ super cardioid 28 dbv/pa/ omnidirectional 22 dbv/ pa/ maximum spl - 1 khz at 1% thd, 1 k load/ cardioid 119 db/ super cardioid 118 db/ omnidirectional/ self noise - a weighted/ cardioid - 23 db spl/ super cardioid - 21 db spl/ omnidirectional - 15 db spl logic connections: led in active low ( 1. 0v), ttl compatible. absolute maximum voltage: 0. 7v to 50v. logicout - active low ( 0. 5v), sinks up to 20ma, ttl compatible. absolute maximum voltage: 0. 7v to 24v (up to 50v/ through 3k ). make: bose/ ahuja or similar brand, digital processor (dsp) - unified core with 24 local audio i/o channels, 128x128 total network i/o channels with 8x8 software-based dante license included, usb av bridging, dual lan ports, pots and voip telephony, 16x16 gpio, 16 next-generation aec processors, 1ru/ q-sys core 110 scripting engine software license, perpetual. , q-sys peripheral providing 4 mic/ line inputs. up to 4 devices daisy-chainable. 1u-1/4w, powered over ethernet or + 24 vdc. surface mountable, rack kit sold separately/ q-sys ) /bid number: gem/2026/b/7101502 * /dated: 22-01-2026 & & / bid document1 / 23
Tender For configuration, restoration and integration of rtu cum gateway work with existing scada - configuration, restoration & integration of rtu cum gateway work with existing scada (siemense make) at 132kv s/s pddu nagar under etd-iii, sahupuri for realtimedatatransmission to sldc lucknow and backup data to modipuram
Tender For supply of interactive display panel with inbuilt or external camera setup , open pluggable specification , display unit , ptz camera , usb video capture card , desktop computer - with all required accessories , ceiling tile microphone , dante enabled audio conferencing processor , networked loudspeaker , 8-port poe switch for audio-visual system , acoustic treatment , 24-port poe switch for network system , 12 u server rack , wireless access point , cable connector converter mounting and installation
Tender For supply of d link cat 6 utp cable 305 meter per box , combo set rj 45 cat 6 lan output box , armoured optical fiber cable 6 core , media converter , fiber pigtail cable , rj 45 connector , d link switch 24 port with patch panel , d llink dgs 1210 28 port smart manageable switch , cat 6 cable patch cord , d link wall mount 15 u rack , d link 6 u rack , pvc cassing capping 4 inch , pvc cassing capping 2 inch , pvc cassing capping 1 inch , network cable with casing installation charges
Tender For tender for supply of radiation resistant cctv camera : : - type-ii (color ccd/cmos , 100m rad) radiation resistant camera head along with radiation resistant pan & tilt unit and mounting brackets. as per attached annexure-1 , corrigendum annexure-2 and annexure-3. , cabling system to transmit signals form vault cameras to ccu system which includes camera to ccu radiation resistant composite cable of 300 meters with 6 sets of cable connectors and applicable power cables as per annexure-1 , corrigendum annexure-2 and annexure-3. , field camera control unit and its racking system which includes 2 no. of camera control unit sub rack & 6 sets of camera control unit (ccu) cards (3 to be installed in field and 3 to be kept as spare for future ) as per annexure-1 , corrigendum annexure-2 and annexure-3 or equivalent sub rack system as per annexure-1 , corrigendum annexure-2 and annexure-3. , setup to convert ccu signals to optical signals which should include 3 no. of fiber optic transmitter and receiver set (capable of 4 camera system) and 6 no. of fiber patch cords , single mode , simpex and 3 no. of light interface unit 12 port , as per annexure-1 , corrigendum annexure-2 and annexure-3. , type-vi (color ccd/cmos sensor , non rr auto dome camera) with mounting brackets as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism to transmit signal from non radiation resistant camera including , poe power supply for non-rr ptz camera (6 no.) field jb /rack in ss material for non-rr ptz camera (2 no.) liu 6 port , din rail mountable for non radiation resistant ptz camera (3 no.) din rail 8 port un-managed network switches (3 no.). 4 no. of fiber patch cords , single mode , duplex for non-radiation resistant ptz camera or equivalent as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism for receiving signal at control room including light interface unit 24 port , rack mount (2 no.) and network video encoder (minimum 16-channel) along with accessories for intra-panel connections (2 no.) and 24 port un-managed network switches or equivalent (2 no.) , 4 no. of fiber patch cords , single mode , duplex as per annexure-1 , corrigendum annexure-2 and annexure-3. , recording and monitoring pc as per annexure-1 , corrigendum annexure-2 and annexure-3. , joystick suitable for mounting on control room panel cutout as per panel drawing as per annexure-1 , corrigendum annexure-2 and annexure-3. , 21 inch led backlit led color monitor as per annexure-1 , corrigendum annexure-2 and annexure-3. , video monitoring software setup as per annexure-1 , corrigendum annexure-2 and annexure-3 for minimum 9 camera. , mobile dolly consisting of camera control unit (ccu) , encoder , switch , joystick , engineering laptop with 15-inch to 17-inch screen , video management software for one camera , connection cables etc and their cabling as per annexure-1 , corrigendum annexure-2 and annexure-3. , control panel/rack 42u/ 27u setup for racking all instruments of cctv at control room as per annexure-1 , corrigendum annexure-2 and annexure-3. , cabling network optical fiber cable (6 core armored cable)-2000 meters twisted pair cable , rs485 , signal cable -200 meters unarmored coaxial cable rg59 -200 meters ethernet cable , cat-6 utp cable -610 meters video connector set -10 meters ethernet connectors rj-45 100 pieces conduit for cables 800 meters and other separate cables/ power cables/accessories required during installation one set of tool tackles for assembly/ disassembly/ of radiation resistant camera head viz. allen keys , lubricants , cable ties , loctite , heat sink , blank caps etc. 2 no. of control panel/rack size 27u setup for racking all instruments of cctv at field as per annexure-1 , corrigendum annexure-2 and annexure-3. as per annexure-1 , corrigendum annexure-2 and annexure-3 . , site installation & commissioning as per annexure-1 , corrigendum annexure-2 and annexure-3. , spare radiation resistance camera head s
Tender For network video recorder (nvr) suitable/similar to dahua model no: dhi-mnvr4208-gfwi with accessories; technical specification: 1) 2tb ssd with 2gb cache memory, 2) 256 gb sd card,3) 8 channel nvr with m12 connector only along with necessary software and control equipment as pericf specification no. icf/md/spec-269 issue status:02 rev.:00 and having compatibility with cctv systems installed in 3-phase rcf bhel dmc. note- one sample to be approved by interfacing with existing cctvsystem before bulk supply. as per specification attached. [ warranty period: 30 months after the date of delivery ] ]