Latest recording system Tenders | Government recording system Tenders

corporations/Associations/Others

CTN :45302843

24 Jun, 2026 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : supply of voice recorder and replay unit (voltage range: 110v- 220v) with audio manual recording system , relax trumpet horn (size: 22 inch and long tail type) , 40w driver unit, make: ahuja (driver unit (ahuja) 40xt with variable watts 15w, 25w, 35w) , 250w power amplifier, make: ahuja (voltage: 230 v)

Central Government / Public Sector

CTN :45575287

08 Jul, 2026 NA

Nanded - Maharashtra

Tender For provision of video recording system in 85 relay rooms, 71 station master rooms over nanded division

CTN :45566341

26 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For data wall system (barco mdg-50-dl)

CTN :45436511

21 Jul, 2026 NA

Patiala - Punjab

Tender For corrigendum : supply of microprocessor based electronic speed indicating, recording system and 01(one) evaluation software for every 10 (ten) sets of spm (without memory card readerunit & communication cable for master to slave) for wag-9/wap-7 & wap5 type 3-phase locomotives to rdso spec no. elrs/spec/spm/0002 rev.4 dated 17.07.2018 and rdso str no. elrs/str/spm/0011 rev.0 dec-2003. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555171

06 Aug, 2026 NA

Chittaranjan - West Bengal

Tender For supply of microprocessor based electronic speed indicating , recording system and 01(one) evaluation software for every 10 (ten) sets of spm (without memory card readerunit & communication cable for master to slave) for wag-9 / wap-7 & wap-5 type 3-phase locomotives to drg./spec. no. elrs/spec/spm/0002\ (rev.4) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45550812

16 Jun, 2026 NA

Sonpur - Bihar

Tender For supply, installation and commissioning of micro controller based electronic speed indicating and recording system along with speed signal volt-24v, dc, speed scale-0-120 kmph .confirming to rdso specification no. mp.0.3700.07 rev.- 07, august 2017, 04 wheeler tower wagon along with 1. recorder cum indicator unit -01 no., 2. speed indicator unit- 01 no., 3. pulse generator -01 no.,4. junction box-01 no., 5.connecting cables -01 set of 05 nos., 6.mounting accessories -01 set. make- medha model-918, laxven and aal or equivalent. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

CTN :45228481

23 Jun, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of cctv system along with accessories regarding security surveillance of railway crossing point at chp area, technical building along with maintenance bay, guard pond, bakreswar dam, caaqms at tapaspur and township area. - materials, bullet camera, ip, ir, varifocal ( 4 mp bullet cameras. ir min. 50 mtr or higher sd card slot, ip66 or better, ik-10 or better, varifocal lens. ), 32 channel nvr, 8 sata interfaces, ( raid supported, 1 esata interface, 2 lan ports, hdmi, vga ports, usb ports ), surveillance hdd 8 tb, wall mount networking rack,19in,size:6u ( wall mount networking rack,19 inch,size:6u with pdu(6/16 amp), 2 fans,1 cable manager, hardware nuts 2 packets. any reputed make ), liu,rack mount,12 port ( 12 port liu loaded, rack mounted, sm, sc ), 8 port gigabit smart managed poe switch ( with sfp, 8+2, power budget 120w or more ), sfp module for ethernet network switch ( sfp/gibic module (sm). same make of network switch ), pigtail sc sm 1m for ofc networking ( pigtail sc sm 1m for networking ), patch chord,fibre optic sc-lc type ( ofc patch chord sc-lc sm 2m ), connector rj45, stp, cat 6 ( rj 45 stp connector (100 nos. box) ), plug socket,15a,250v,3 pin anchor ( composit flash piano key type switch socket unit,4 fixing holes additional data: electric socket set with mcb (15amp) ), dp,mcb,6 a ( 6 amp mcb ), hdpe pipe ( isi marked, grade: pe100, is code: is4984-2016 )