Tender For tender for supply of puc civil allied works : : - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1
Tender For supply of cgi sheet 2400mm x 910mm x 0 dot 63mm with zinc coating of 120 gms oblique sqm on both sides conforming to is 277 1977 make tata oblique jsw oblique jindal , readymix synthetic enamel paint drying colour 04 ltr packing paint colour as specified make berger oblique asian oblique nerolac , turpentine oil , readymix synthetic enamel paint redoxidemetalprimer in 04 ltr packing make berger oblique asian oblique nerolac , painting brush 100 mm horse brand long hair , plywood 6 feetb x3 feet x 12mm make century oblique kitply oblique green lam , plywood 8feet x 4feet x 8mm make century oblique kitply oblique green lam , led bulb 18 watt crystal white make havells oblique philips oblique syska , led tube light fittings 20w,4 feet long tube rod connecting to ceiling rose make philips oblique havells oblique syska , led security light fitting 45 watt cool white grey single piece high pressure die cast aluminium with ip 65 protection waterproof make havells oblique phillips oblique bajaj oblique syska , pendent holder make cona oblique havells oblique legrand , switch socket combination 5 amp 5 pin make havells oblique anchor oblique panasonic oblique legrand or equivalent to is 3854 1997 , switch socket combination 15 amp 5 pin with gang box make havells oblique anchor oblique panasonic oblique legrand or equivalent to is 3854 1997 , switch socket combination 5 amp 5 pin with gang box make havells oblique anchor oblique panasonic oblique legrand or equivalent to is 3854 1997 , plug top 3 pin 15 amp make cona oblique havells oblique legrand , plug top 3 pin 5 amp make cona oblique havells oblique legrand , pvc insulated copper conductor multi strand round wire 1 dot 5 sqmm single core conforming to is 694 1990 make havells oblique kei oblique finolex roll of 90 mtrs , pvc insulated copper conductor multi strand round wire 2 dot 5 sqmm single core. conforming to 694 1990 make havells oblique kei oblique finolex roll of 90 mtrs , flexiable wire 2 core standard copper conductor pvc sheathed 23 oblique 76 make polycab oblique finolex oblique national roll of 90 mtr , pvc insulation tape 19 mm wide 0 dot 125 mm thick and 09 mtr long as per is 7809 isi marked make anchor
Tender For providing of custom bid for services - supply and apply of primer for metal for 2000 square meter,custom bid for services - supply and apply of primer for wood for 500 square meter,custom bid for services - supply and apply of primer for masonry surface for 3000 square meter,custom bid for services - supply and apply of wall putty on masonry surface for 500 square meter,custom bid for services - supply and apply of metal putty for 300 square meter,custom bid for services - supply and apply of wood putty for 100 square meter,custom bid for services - supply and apply of synthetic enamel paint on metal/ wood for 5000 square meter,custom bid for services - supply and apply of enamel paint on floor for 8000 square meter,custom bid for services - supply and apply of stains on wood for 500 square meter,custom bid for services - supply and apply of two-pack melamine varnish on wood/metal for 500 square meter,custom bid for services - supply and apply paint for letter painting/ marking for 10000 inch meter,custom bid for services