Tender For emergency ohe mast (temporary mast) for conventional ohe suitable for used either on sleepers as per rdso drawing no.eti/c/0072 except for base plate. the base plate design should be suitable to be used with 32mm dia spikes directly on the ground as detailed in drawing no.m/trd/sk/801 as well to be used with sleeper. both rdso drawing for the mast and drawing for modified base plate are enclosed. the base plate of the bottom piece of the emergency mast should be of the same size as detailed in the base plate of drawing no.m/trd/sk/801. tubular steel section of adequate thickness suitable for 20 mm dia through bolt should be provided by welding on one side in the base plate of the bottom piece of the emergency mast. two numbers of tubular steel sections of the same size as in the base plate of mast should be provided in the top piece of the modified base plate. this should facilitate erection of emergency mast quickly and easily by placing the mast on modified base plate by inserting and aligning a long bolt on these 3 welded tubular sections. photograph of the arrangement is also enclosed for reference. further, scope of supplyincludes supply of 8+4=12 nos. of spikes as detailed in the base plate drawing described above and 1 no ofthrough bolt of size m20x550. top corner plates a1,b1,c1 and d1 should be firmly welded with bottom sideof c channels marked as a, b, c & d in the drawing. it shall be noted that 4 nos. of bottom corner plates marked as a-1, b-1, c-1 and d-1 of size exactly same as that of a1,b1,c1 and d1 with 20 mm dia holes at the corners is included in the scope of supply, which should be supplied as separate pieces. two holes suitable for providing 16 mm bolt should be made on opposite faces of the bottom piece of mast at approximately 450 mm height from the base plate. finished product should be given one coat of primer on which one coatof suitable anticorrosive painting should be given. [ warranty period: 30 months after the date of delivery ]
Tender For supply of 25b80c008 epoxy based primer for application in ballast tank (n8010-p009678) , 25b80c008 epoxy based anti corr paint for application in ballast tank (n8010-p009679) , 25b80c008 anti corrosive llps (grey/bronze) (n8010- p061944) , 25b80c008 anti corrosive llps (alluminium) (n8010-p061977) , 25b80c008 epoxy thinner (n8010- p062201) , 25b80c008 anti corrosive paints, fresh water tank (n8010-007652) , 25b80c008 anti corrosive paints, avgas/avcat (n8010-007653) , 25b80c008 anti corrosive paints, water compensated diesel oil tank (n8010-007654) , 25b80c008 anti corrosive paint, used for hydraulic oil tank (n8010-007655) , 25b80c008 anti corrosive paint used for acid store battery (n8010-007656) , 25b80c008 paint finishing (ral 7040) grey (n8010-007507) , 25b80c008 paint finishing (ral 9011) black (n8010- 007508) , 25b80c008 paint polyurethane grey (n8010- 007509) , 25b80c008 paint polyurethane red (n8010- 007510) , 25b80c008 tie coat for application of tin free spc a/f paints (n8010-p009601) , 25b80c008 brown/ light red tin free spc a/f paint for u/w application (n8010- p009602) , 25b80c008 red brown/ darked tin free spc a/f paint for u/w application (n8010-p009603) , 25b80c008 h. p advanced non-skid coating for helo & flight deck (n8010-007693) , 25b80c008 h. p anticorrosive paint for use under non-skid coat (n8010-007694) , 25b80c008 international thinner gta220 (n8010-001549)
Tender For providing of operation and maintenance of substation - repairing of isolator mom box 05 nos. situated in 132 kv switchyard at 220 kv s/s bah including work of fixing size of 100×1350 mm 18 swg ms sheet shall be welded to be outside surrounding area and 55×75 mm extra support frame side of bottom of the box by welding the hings on boxes doors are to be replaced by cutting and welding door edges where damage by rust shall be repaired by fresh sheet of gi sheet, latching arrangement to be provided on box by new latch and socket. old rubber beeding be completing removed from box doors and replaced with new rubber beeding then boxes shall be printed on outside with one coat redoxideprimer and one coat smoke gray paint, etc.
Tender For corrigendum : supply of double shutter incl all fitting and as directed make jindal or hindalco isi makred , aluminium ventilator three track frame section weight 1.5 kg per rm less than 1.5 kg per rm size 1200 mm x 600 fixed type with glass 4 mm thick 0.45 mm dia ss wire mesh including all fitting , ceramic tiles of size 600 x 600 mm for floor thickness between 9 to 10 mm thick make kajaria or johnson or orient isi equivalent 1st quality conform to is 156 of 2006 , white cement conform to is 8042 of 1989 make acc or birla white or ambuja or isi equivlent , moveable pvc panel 12 mm thick aluminum frame work 6 ft height and 4 feet long 2 panel in each frame room divider for privacy officer accents including holding system complete , app based polymeric membrane min weighing 30 kg per sqm and minimum 3 mm thick reinforced with polyster non wove frabic all specition as per ts , priming surface and applying bitumen as a primer in base of app membrane , ms rhs size 100 x 50 x 4.5 ms frame work for roof trusses purlin rafter and ms plate etc all as directed make tata or sail or jsw , ms rhs size 50 x 25 x 2.9 , ms rha of size 96 x 48 x 3.2 , ms flat 40 x 5mm thick for wind tie make tata or sail or jsw , ms plate of size 10mm thick , ms plate of size 8mm thick , ms angle of size 40 x 40 x 6 for cleat , ms plate of size 12 mm thick , ms nuts and bolts of length 100 mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25 mm of shank and 2 wahsers 3 mm thick complete all as directed , ppgi ridge sheet 0.80 mm thick 10 x 3 ft make sail or tata or jindal incl treating galvanised surface with mordan solution 2 coat synthetic camoglage paint over one coat of redoxideprimer , ppgi ridge sheet 0.80 mm thick of 90 cm wide make sail or tata or jindal incl treating galvanised surface mordant solution two coat synthetic camoglage paint over one coat redoxideprimer , hdpe sand bags og colour of size 0.75 x 0.375 x 0.15 , self taping steel screw half thread with rawl plug of 1and half 2 inch 100 nos per pkt , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 to 1989 make gold or ambuja or ultratech or acc or jk or dalmia retaining wall 48 x 4 mtr height 8 x 4 x 6 nos 48 rm , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long make prince or finolex or supreme or isi equivalent , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 to 1989 make gold or ambuja or ultratech or acc or jk or dalmia constr matiral for drain or sump , hardcore 63 to 90 mm , bricks sub class b , mild steel bars of size 10 mm dia conforming to is 432 part i 1982 make tata or sail or jsw or isi equivalent , three phase 1.2 hp monoblock pump 430 volt complete with incl 3 mtr length required flexible size suction pipe foot valve and connected accessories compete all as per ts , distribution box 8 way double door spn 240 volts copper bar and neutral link earthing stud conform to is 13032 and 8623 double door type make havells or legrand or l and t or isi euivalent , mcb spn 240 volts 32 amps make havells or l and t or standard or isi equivalent , mcb sp 240 volts 6 to 32 amps make havells or l and t or standard or isi equivalent , pvc tape 19 mm wide 5 mtr long make grip or anchor or kinjal or isi equivalent , cable pvc insulated electric cable heavy duty 1100 volts grade multi standard copper conductor size 1.5 sqmm single core all as per ts , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor size 2.5 sqmm single core all as per ts , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor size 4 sqmm single core all as per ts , pvc casing //bid details 2 / 87 capping 1 inch medium grade snow white make presto or polycab or finolex or isi equivalent , pvc casing capping 3 by 4 inch medium grade snow white make presto or polycab or finolex or isi equivalent , switch piano type 5a 230v flush type one way snow
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work for supply and apply of one coat of epoxy primerredoxide and two coat synthetic enamel oil paint anti corrosive at various structure as pe..
Tender For bid to ras supply of taking down cement plaster of any description on brick walls , m and l rendering 15mm thick rendering cement plaster in cm 1 by 6 , m and l for rendering 15mm thick on fair face of brick upto 15 mtr height , supply only liquid water proofing compound isi marked , complete removal of existing treatment by scrapping of wall , material and labour for applying a layer of acrylic crack filler paste , providing and applying a layer of wall care putty in two or more coats , material and labour for applying with 1 coat of interior primer , material and labour for applying 2 coats of interior acrylic emulsion paint , m and l for applying with 1or 2 coats of acrylic waterproof primer , material and labour for applying 2 coats of modified acrylic exterior emulsion , providing and applying waterproof wall putty cement based or polymer
Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat
Tender For supply of shelter parts for genr shed , pvc casing caping 25mm , pvc insulated heavy duty 1100 volt grdae cable with aluminum conductor twin core , surface and wall mounted led tube rod 20 watt , mcb db 4 way spn 240 volt , mcb 32 amp sp 240 volt , insulator dp 40 amp dp 240 volt 50 hz , pvc switch board 8 inch into 10 inch , scocket pt 15 by 16 amp 240 v , scocket pt 5 by 6 amp 240v , 1 sqmm single core cable , 1 point 5 sqmm single core cable , insulation tape19mm width 25mm long , piano type switch 5 by 6 amp , piano type switch 15 by 16 amp , black screrw 1 inch , earthing set complete , lighting conductor with safe chemical , pcc cement is 1489 , coarse sand , 20mm aggregates , 40mm aggregates , hardcore 63mm stone aggegates , pcc solid block 400 into 200 into 200mm , 12mm plyboard for form wide , pvc strips of size 3mm thick 38mm wide , 12mm dia tmt bar as per is 1786 , 8 mm dia tmt bar as per is 1786 , self trapping screw 55mm , self trapping screw 100mm , pop revit machine , pop revit , high carbon steel casing silicon gun , silicon tube minimum 280ml , water proofing compound , white cement , lime unshaked of best quality , redoxideprimer , turpentine oil , synthetic enamel piant white colour , synthetic enamel piant black colour , synthetic enamel piant green colour , weather coat paint for internal and external paint for wall , roller brush 4 inch of best quality , foam roller brush for wall pianting of size 7 inch , painting brush 3 inch , writing brush , binding wire 20 gauge , machine pressed precast concrete interlocking block of size 225 into 112 , pcc kerb stone type b1 size 300 into 100 into 300mm , kerb stone synthetic enamel piant yellow and black , turpeline oil thinner , painting brush 3 inch , heavy duty double wheel trolley 160 kg capacity ms body 18 gause ) /bid number : gem/2026/b/7438413 * /dated: 13-04-2026 & & / bid document 1 / 36
Tender For supply of shelter parts complete for genr shed , pvc casing caping 25mm , pvc insulated heavy duty 1100 volt grdae cable with aluminum conductor twin core , surface and wall mounted led tube rod 20 watt , mcb db 4 way spn 240 volt , mcb 32 amp sp 240 volt , insulator dp 40 amp dp 240 volt 50 hz , pvc switch board 8 inch into 10 inch , scocket pt 15 by 16 amp 240 v , scocket pt 5 by 6 amp 240v , 1 sqmm single core cable , 1 point 5 sqmm single core cable , insulation tape19mm width 25mm long , piano type switch 5 by 6 amp , piano type switch 15 by 16 amp , black screrw 1 inch , earthing set complete , lighting conductor with safe chemical , pcc cement is 1489 , coarse sand , 20mm aggregates , 40mm aggregates , hardcore 63mm stone aggegates , pcc solid block 400 into 200 into 200mm , 12mm plyboard for form wide , pvc strips of size 3mm thick 38mm wide , 12mm dia tmt bar as per is 1786 , 8 mm dia tmt bar as per is 1786 , self trapping screw 55mm , self trapping screw 100mm , pop revit machine , pop revit , high carbon steel casing silicon gun , silicon tube minimum 280ml , water proofing compound , white cement , lime unshaked of best quality , redoxideprimer , turpentine oil , synthetic enamel piant white colour , synthetic enamel piant black colour , synthetic enamel piant green colour , weather coat paint for internal and external paint for wall , roller brush 4 inch of best quality , foam roller brush for wall pianting of size 7 inch , painting brush 3 inch , writing brush , binding wire 20 gauge , machine pressed precast concrete interlocking block of size 225 into 112 , pcc kerb stone type b1 size 300 into 100 into 300mm , kerb stone synthetic enamel piant yellow and black , turpeline oil thinner , painting brush 3 inch , heavy duty double wheel trolley 160 kg capacity ms body 18 gause ) /bid number : gem/2026/b/7439083 * /dated: 13-04-2026 & & / bid document 1 / 36
Tender For supply of procurement of paints and associated items in set each one consisting of (1) de greaser (de rusting & cleaning) qty. 02 ltrs. (2) body filter qty. 20 ltrs. (3.) ap primer (pu) qty. 100 ltrs. (4) polyester putty qty. 40 kgs. (5) pu surfacer grey qty. 40 ltrs. (6) pu beige grey ral 7006 qty. 30 ltrs. (7) pu umbragrey ral 7022 qty. 30 ltrs. (8) pu bright red orange ral 2008 qty. 30 ltrs. (9) pu thinner qty. 60 ltrs. (10) pu clear (clear coat to remove scratch) qty. 15 ltrs. specification: rdso specification no. m&c/pcn/100/2018 [ warranty period: 30 months after the date of delivery ]