Latest refractory anchor Tenders | Government refractory anchor Tenders

Central Government/Public Sector

CTN :39206006

14 Feb, 2025 NA

Bathinda - Punjab

Tender For supply of titanium plate

CTN :38874131

05 Feb, 2025 49.0 Thousand

Bhopal - Madhya Pradesh

Tender For bid to ras supply of oral maxillofacial surgery expendables titanium bone plate y shape size one and half mm, titanium bone plate two hole with gap size one and half mm, titanium bone plate four hole with gap size one and half mm, titanium bone plate continuous ten hole size one and half mm, titanium bone plate two hole with gap size two mm, titanium bone plate continuous ten hole size two mm, titanium bone plate continuousten hole size two and half mm, titanium bone plate screw dia one and half mm length six mm pkt of five minus head, titanium bone plate screw diaone and half mm length eight mm pkt of five minus head, titanium bone plate screw dia two and half mm length eight mm pkt of five minus head , drill beat one mm, drill beat one and half mm, drill beat two mm, self holding screw driver minus head one and half mm two mmtwo and half mm for oral surgery set of three, screw driver minus head one and half mm two mmtwo and half mm for oral surgery set of three- quantity

CTN :39143800

20 Feb, 2025 NA

Hyderabad-T - Telangana

Tender For tender for supply of should have 40 degree upward jaw angle with a thin foot plate and a black titanium coating on the surface to limit glare under lights. the rongeur should have a bone ejector . make- 410 ss dimension-9 inch shaft and 4 rongeurs with a bite size of 1mm , 2mm , 3 mm and 4 mm , should have 40 degree upward jaw angle with curved shaft designed to improve access to foramen. make- 410 ss dimension-8 inch shaft and 2 rongeurs with a bite size of 2mm and 3 mm. , should have 40 degree upward jaw angle with thin foot plate for tight area. full 360 degrees rotation shaft. the shaft should be removable for easy cleaning and replacement with ergonomically shaped handle. make- 410 ss dimension- 21 cm shaft and 2 punches with a bite size of 2mm and 3 mm , should have straight jaws with cups able to hold soft tissues make- 410 ss dimension- 20 cm shaft and 4 punches with a bite size of 2mm , 3 mm , 4 mm and 5 mm. , should have upward jaws with cups able to hold soft tissues make- 410 ss dimension- 20 cm shaft and 3 punches with a bite size of 2mm , 3 mm and 4 mm . , should have downward jaws with cups able to hold soft tissues make- 410 ss dimension-20 cm shaft and 3 punches with a bite size of 2mm , 3 mm , and 4 mm. , should have straight jaws make- 410 ss dimension-18 cm shaft and 3 punches with a bite size of 2mm , 3 mm , and 4 mm. , the nibbler should be curved with double action. make -410 ss dimension-18 cm long with 4 mm bite size , the bone cutter should be angulated with double action. make -410 ss dimension-18 cm long , laminectomy forceps with right angle bend and double action . make -410 ss dimension-27 cm long , the osteotome should have tufnol handle which is straight. dimension-5 osteotomes of width 5mm , 10mm , 15mm , 20 mm and 25 mm , dimensions- 19 cm length 22mm head size with weight of 165 gm/6 oz. , the elevator should be midly curved at the distal end and should have tufnol handle. dimensions-19 cm length and width of 3 mm and 6 mm , dimensions-23 cm length and width of 6 mm , dimensions-22 cm length size of 7mm x 12 mm and 10 mm x 13mm , dimension-standard sized elevator with tufnol handle-not steel handle , the curette should be having straight handle with straight cup. dimensions-21 cm length cup size - 4 curettes of cup size 1 , 0 , 00 , 000 , 0000 , the curette should be having straight handle with distal forward angulated cup. dimensions-21 cm length cup size -4 curettes of cup size 1 , 0 , 00 , 000 , 0000 , dimension- 7 inches length , dimension- 9 inches length , dimension- 7 inches and 9 inches , the probe should have a ball tip end. dimension- 23.5 cm. tip size- 4mm , the probe should have a ball tip end. dimension-24.5 cm tip length-5 mm , dimension- 21cm with tip size of small medium and large , dimension- 19 cm , dimension 17 cm prongs 4x4 with 14 mm depth , the retractor should have sharp prongs with jointed arms. dimension- 30 cm length with 100 mm depth of prongs , the retractor should have sharp prongs with jointed arms. dimension- 20 cm length with 70 mm depth of prongs , the retractor set should contain retractor frame , small , medium and large blades with instrument container. this set should also contain supplementary blades , unilateral blades heads and unilateral t-blades , dimensions-23 cms 4 tips of sizes 2mm , 3mm , 4mm and 5mm , the forceps should have flat handle with blunt tips dimensions- 19 cm , autoclavable and designed for spine instruments , the retractor set should allow microsurgery approach to lumbar disc. the specula should have a black finish to reduce glare. the blades of specula should be fenestrated. dimensions- sizes 40mm to 70mm , the needle holder should be straight and have delicate 1 mm jaws and should have lock. dimension- 23 cm , the forceps should have flat handle with blunt tips 1mm dimensions- 23 cm , the scissors should have flat handle. dimensions-23 cm straight and curved

CTN :39145319

20 Feb, 2025 NA

Delhi - Delhi

Tender For supply of rfp 35 neurosurgery - disposable spine drape kit , disposable shunt drape set iodine impregnated 200cm x 120cm , craniotomy tool tapered 8 cm 2point3 mm non spiral , craniotomy tool tapered 8 cm 2point3 mm spiral , external ventricular drainaghe system , raney clip box of 200 , adjustable trasverse cross connector screw for 5point5mm rod , titanium expandable cage large , titanium expandable cage medium , oxidiesed regenerated cellulose 1x2 inch box of 10 , anterior cervical plate two level with 4 self tapping screws , anterior cervical plate three level with 4 self tapping screws , anterior cervical plate single level with 4 self taping screws , oxidiesed regenerated cellulose size 2x4 inch , oxidiesed regenerated cellulose size 4x4 inch , pre sterile gigli wire saw , c arm drape , five layer atraumatic foam dressing size 10x20 cm , five layer atraumatic foam dressing size10x25 cm , five layer atraumatic foam dressing 7point5x7point5 cm , external lumbar drain set complete with collection bag , antibiotic impregnated ventriculo-peritoneal shunt , theco peritoneal shunt , sutureless absorbable dural subsititute 1x3 , sutureless absorbable dural subsititute 2x2 , sutureless absorbable dural subsititute 3x3 , sutureless absorbable dural subsititute 4x5 , oxidiesed regenerated cellulose size 2x3 inch , oxidiesed regenerated cellulose size 1x2 inch , ioban impregnated incision drape 34x35cm , ioban impregnated incision drape 45x35 cm , peek cervical spacer with titanium slot and screws 5 mm , peek cervical spacer with titanium slot and screws 6 mm , surgicel nuknit 1x3point5 inch box of 10 foils , cervical lateral mass polyaxial screws 3point5 x 10 mm with top nut , cervical lateral mass polyaxial screws 3point5 x 12 mm with top nut , cervical lateral mass polyaxial screw 3point5 x 14 mm with top nut , cervical lateral mass polyaxial screw 3point5 x 16mm with top nut , cervical lateral mass polyaxial screw 3point5 x 18 mm with top nut , cervical lateral mass polyaxial screw 3point5 x 8 mm with top nut , cervical lateral mass polyaxial screw 4 x 14 mm with top nut , cervical lateral mass polyaxial g screw 4 x 16mm with top nut , cervical lateral mass polyaxial screw 4 x18 mm with top nut , cervical lateral mass polyaxial screw 4x 20 mm with top nut , skin stappler with 35by55 stainless staples , bipolar forceps handle flat for use with isocool tips , isocool active heat transfer bipolar tip 0point25 mm , laminoplasty spacers pack of one with screws , deep brain stimulator with complete set , dose modulating intrathecal baclofen pump 40ml with approval , occipital keel plate large with four occipital screws , occipital keel plate medium with four occipital screws , v p shunt medium pressure , v p shunt low pressure , cranial fixation titanium clamps 11mm asculap box of 12 , cranial fixation titanium clamps 16mm asculap box of 12 , craniofix absorbable 14mm box of 6 bid details/ 2 / 48

Central Government/Public Sector

CTN :39116348

10 Feb, 2025 NA

Bhusawal - Maharashtra

Tender For supply of titanium lcp distal radius 2.4mm variable angle volar plate set of 1 plate + 6 lo cking screws - imported, interchangeable size (or as per specification) ]

Central Government/Public Sector

CTN :38882866

10 Feb, 2025 NA

Chennai - Tamil Nadu

Tender For supply of srph401542-lcp-titanium broad 4.5mm plate-6 to 9 holes.the screw system merges locki ng screw technology with conventional plating technology. the set must be supplied with 20 cor tical screws and 40 locking screws along with complete set of instrumentation including sleeves and torque limiting screw driver. it must be supplied as and when required basis. unit:set ]

CTN :39055500

12 Feb, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of dglp re 29 - surgical mask 3 ply , durapore , cannula iv size 26 g , knee cap l , knee cap m , cannula iv with injection port and wings size 16g , cannula iv with injection port and wings size 18g , cannula iv with injection port and wings size 20g , disposable plastic infusion set for iv fluids presterilises pyrogen free complete with airline and nylone filter alongwith airvent , nasal cannula adult , abdominal binder 10 , bandage dvt stocking small , bandage dvt stocking medium , bandage dvt stocking large , dressing shell compressed , gauze surgical open wove unmedicated 60 cm wide length 18 mtr , mask for nebuliser adult , disposable nebulizer set with mask paediatric , condom catheter medium size , gauze surgical open wove unmedicated 60 cm x 3 metres packet , rom knee brace assorted should be made of 3 layered soft foam material with patellar open design should have strong durable aluminum , rom elbow brace , ao type universal extranal fixator set with 2 tube to tube clamp with 6 universal clamp single pin 2 univeral clampdouble pinwith tubular rods , osteoarthritis knee brace , neoprine pcl brace , inj denosumab 60 mg , saw blade with complatable with maman drill hand piece , respirometer , finger exercosed gel ball , cervical pillow , cannulated screw driver for headless compression screw 2point7 3mm , bilateral knee drape set- made of impermeable control plus fabric with triple layer two large water proof trolley cover of size 160cm , radiofrequency probes 90 degree with suction compatible with mitek electrode system , wire kirschner with drill head ended 25 cm long x 1point2 mm dia stainless steel , ethibond ployester no 5 sterile , sterile disposable knee arthroscopy drapes pack with fluid collection bag with suction port and tube holders water proof , triclosan coated braided dyed polyglactin for orthopaedic surgery size no 1 90cm long thread with taper cut heavy needle usfda approved , triclosan coated braided dyed polyglactin for orthopaedic surgery size no 2 90cm long thread with taper cut heavy needle usfda approved , total knee replacement modular posterio stabilised cr for components see appx , total knee replacement modular posterio stabilised high flex for components see appx , simplex cmw 3 low viscosity cement , pmma gentamycin beads of 60 , granules , stockinet 5point08 cm bleached , stockinette 10point16 cm bleached , methyl prednisolone sodium succinate inj 80 mg , aquacel ag surgical 9 cm x 30 cm x 3point5 in x 12 in , mobile bearing unicondylar knee system with 1 co cr femoral component 2 mobile bearing congruent poly insert 3 tibial , flipcutter 5 to13 mm and 50 to 130 degree for all inside acl reconstruction , short flipcutters 5 to 12 mm and 50 to120 degree for all inside acl reconstruction , titanium femur neck system with one hole plate one bolt and one antirotation screw wwhich pass through bolt with 5 , expert retrograde antegrade femoral nail system with 9point0mm to 12 mm dia and 160 480 mm length with 1500 mm , atfl kit , diclofenac diethylamine 4point64 percentage w v only topical solution with qps technology 30ml , locking distal humerus dual plate system with variable locking opton with plus 150 off axis angulation as lateral plate , trochanteric femur nail with inbuilt set screw capable of allowing cannulated screws and blade with same hole in proximal part , cross linked high molecular weight sodium hyaluronate for intra articular viscosupplementation 30 to 50 mg in pfs of 2 to 6 ml bid details/ 2 / 52

CTN :39084105

15 Feb, 2025 NA

Ernakulam - Kerala

Tender For supply of 2.4/2.7/3.5 mm variable angle bolar distal radius locking plate titanium with 2, 3, 4, 5 holes in longi

CTN :38984140

06 Feb, 2025 6.00 Lacs

Sheopur - Madhya Pradesh

Tender For e tender for supply of orthopedic implants, neuro surgery instrument, dental unit material for orthopedics department in district hospital, sheopur. - name of ortho implant, nailing system for trauma, interlocking nail for tibia- all sizes with 4 lockingbolt set, expert tibial nailing system (titanium) all sizessystem with all bolts set, distal tibia nail - all sizes with 4 locking bolt set, interlocking nail for femur - all sizes with 4 lockingbolt set, supracondylar nail - all sizes with 4 locking bolt set, distal femur nail multilock all sizes with locking bolts, proximal femur nail all sizes with all locking bolts -short and long, proximal femur nail a2 (stainless steel) - shortpfn /long pfn all sizes with locking bolt set, proximal femur nail a2 (titanium) - short pfn /long pfn all sizes with locking bolt set, proximal humerus multi lock nail- all sizes withlocking bolts, interlocking humers nail- all sizes with 4 locking boltset, k nail for femur- all sizes set, square nail radius with screw set (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter & sizes set, titanium elastic nailing system (tens)-all size (dia.2mm,2.5mm,3mm,3.5mm,4mm,4.5mm)(length 44 cm), plating system for trauma, ao trauma mini set - stainless steel andtitanium, ao trauma small set - stainless steel andtitanium, ao trauma standard set - stainless steel andtitanium, dynamic compression plate (d.c.p.small 3.5mm)radius/ulna complet set with screw, d.c.p.narrow for tibia / humerusall sizes with 4.5cortical screw compleate set, d.c.p.broad (4.5 mm )for femur - all sizes with 4.5cortical screw and screw hole set, l.c.p.plate small (3.5 mm) all sizes with locking screwhole set, l.c.p.plate narrow (4.5 mm) with screw complete set-all sizes, l.c.p.plate broad (4.5 mm) with screw complete set, reconstruction plate non locking 3.5mm- allsizes with 3.5 cortical screw set, reconstruction plate locking 3.5mm - all sizeswith 3.5 cortical screw set, reconstruction platenon non locking 4.5mmwith screw complete set, reconstruction plate locking 4.5mm with screwcomplete set, semi tubular plate 4-12 hole all sizes with screws holeset, one third tubular plate 4-12 hole all sizes withscrews hole set, clavicle lateral end plate with screws set, clavicle hook plate with screws set, clavicle locking precontoured plate 6-10 holewith locking screws set, proximal humerus locking plate (philos) set - 4-12 hole) plate with required locking screw set, distal humerus locking compression plate -medial &lateral(allsize with screw), lcp extraarticular distal humerus metaphyseal locking plate 4 to 12 hole (all size with screw), lcp radial head plate (all size with screw), locking olecrenon plate (all size with screw), hook plate olecranon plate (all sizes withscrews), distal radius locking plates (right / left) 4-8hole, distal radius t plate all sizes with screws, distal radius l plate all sizes with screws, distal radius locking plate variable angle 2.7mm and 2.4 mm system all sizes with screws, distal radius rim plate all sizes, mini plate and screws 1.5mm/ 2mm/ 2.7mm set for metacarpals and phalanges, dhs system with d.h.s.plate (round hole ) angle 125*, 130*, 135*, 140*, 145* short barrel 4-18 hole, long barrel 4- 18 hole, lag screw with compression screw 50-130 mmcortical screw (4.5 mm size 16mm-40mm), d.h.s.with trochanteric support plate with lagscrew comp.setall sizes (4-8 hole) & required cortical screws set, pfn with trochanteric support plate all sizes, proximal femur locking plate all sizes, femoral neck system (fns) all sizes, d.c.s.plate 95* 4 hole to 12 hole, angled blade plate - all sizes with screws, double angled blade plate with lag screwall sizes (4-10 holes) with required cortical screws set, pediatric d.h.s.all sizes with 3.5mm cortical screw set, distal femur locking plate (lateral) (dflcp) 6-18hole, proximal tibia locking plate (ptlcp) 6-15 hole, raft locking plate for proximal tibia setall sizes (5-8 hol

CTN :39051987

12 Feb, 2025 5.71 Crore

Kolkata - West Bengal

Tender For procurement of medical stores - primary uncemented thr system, proximally coated double/triple taper wedge collarless stem (12/14 neck taper), primary uncemented thr system, fully coated double/triple taper wedge collarless stem (12/14 neck taper), uncemented thr consisting of grit-blasted biocompatible titanium stem, ao pattern dhs fixed angle barrel plate 130-150 degrees, 3-6 combi-holes, antirotation proximal femoral nail with screws (assorted sizes), cemented bipolar hip prosthesis with double/triple tapered polished collarless cobalt chrome femoral stem (12/14 taper), posterior stabilized fixed bearing modular knee replacement prosthesis, augmented posterior stabilized modular knee replacement prosthesis, locking proximal tibial osteotomy plate titanium plate with 8 x compatible 5.0 mm locking head screws, spacer and 1 x 4.5mm cortical screw.implants should be us fda and ce certified., ao pattern 4.0 mm partially threaded cannulated cancellous screws 20 to 80 mm length with washer titanium, should be mri safe., cannulated tibial nail with 5 proximal locking and 4 distal locking options, 255-435mm length in 10-15mm increments, 8-13mm dia, with 8 compatible locking bolts, and 01 end cap (0-15mm) complete construct, lcp 3.5mm anterolateral distal tibial locking plates with 4-5 holes for subchondral bone, 5-15 holes for metaphysis/shaft with compatible 90% locking head screws and 10% cortical screws, complete construct, lcp 3.5mm distal tibial medial locking plates with at least 8 holes in head (including medial malleolus extension) 4-14 shaft holes with compatible 90% locking head screws and 10% cortical screws, complete construct, 4.5/5/5.5mm anatomical lcp for distal femur 05/16 holes with 80% locking head fully threaded solid/cannulated screws and 2 cortical screws complete construct., 3.5mm locking proximal humerus periarticular plate 5-14 shaft and at least 6 locking hole, distal humerus anatomical medial plate 3.5mm (all sizes, left or right), complete construct with 80% locking head screws and 20% cortical screws, distal humerus anatomical posterolateral plate 3.5mm (all sizes, left or right) complete construct with 80% locking head screws and 20% cortical screws, 4.5mm narrow lcp with combi-hole technology, plate length 8-16 holes, with 40% cortical screws and 60% locking head screws

Refractory Anchor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector