Tender For supply of switch toggle, part no.z7872000175 , toggle switch, part no.z7872000176 , toggle switch, part no.z7872000174 , seal kit, part no.z9372005291 , seal kit consists of nbr 8 to 16, part no.z9372000458 , switch head side lamp, part no.x7872000097 , cylinder assembly throttle, part no.7372002534 , complete assy, part no.7683000067 , sheave assy complete includes, part no.6718000451 , kit seal, part no.9049111761 , switch toggle, part no.z7872000218 , park brake assly, part no.w7926000413 , brake valve tandem, part no.7926100619 , fluid level and temp. gauge, part no.x7486000086 , coil electrical, part no.4963341 , temp sensor, part no.z7486000166 , flow divider, priority type, part no.7926100814 , seal kit, part no.z9372011686 , harness assy, part no.u6512000232 , seat, part no.z7798000001 , relay, part no.7750000056 , relay, part no.z9352000055a , hose kit comprising, part no.h880ckmt98 , temp sender 150deg c, m14x1.5, part no.z7486000099 , oil pressure sender 10 bar, part no.z7486000097 , sensor pressure, part no.3815882 , pressure switch 0.8 bar, part no.z7872000118 , orfs kit, part no.9999100855 , cartridge and coil assy, part no.9926111859 , cart and coil assy 12v, part no.90022120 , seal kit for hoist unit, part no.v7974000035 , coil and cartridge, part no.9926108768 , rod assy, part no.9049112119 , end assy tie rod lh thd, part no.9049112120 , end assy tie rod r.h. thd, part no.9049112121 , piston, part no.9049107148 , swivel joint, part no.7364000367 , hot engine oil hose 7 by 8 id, part no.7542512561 , tri line hose 1 by 2 x 60, part no.z7543000715 , motor starting, part no.3102766 , belt, part no.3289569 , harness assy s s, part no.u6512000233 ) /bid number : gem/2025/b/6499248 * /dated: 28-07-2025 & & / bid document 1 / 29
Tender For corrigendum : procurement of elgi make spares required for lubrication systems equipped in 15 nos of elgi mobile service vans working at shovel, drill section and dozer section of pkoc, manuguru area on specific make basis - reg. - oil pump assy an 4/200, oil hose assy, grease hose assy 15n sts, kit assyo ring for, grease pump, ah4/50 tun- air, operated grease, pump kit, grease pump, oil seal, safety valve assy, 3/4" 17 kgs, seal, oil, washer seating, gasket, cup seal(1010414), cup seal, grease pistol, ah4/50kit, grease piston assy, piston packing, air motor assembly, cover packing, v-belt b 75"(1905mm), filter, o ring, packing ring, mouth piece assly, pump assembly, water, bucket washer, hose connector, connecting piece elgi, aircompressor tc 1000, l swivel assembly
Tender For corrigendum : supply of single probe receiver assembly complete with tapered bell mouth housing release lever release lever lanyard and indicator arm , base plate for single probe receiver assembly , swivel arm assembly with slip pelican hook arm and bail and jackstay terminal fitting , hinged cover plate for probe receiver , adaptor hose to probe receiver complete with split camp , receiver hose assembly seven inches 177 mm x 4.5 m complete with reusable coupling at one end matching with receiver and the other end with female coupling matching with flange adaptor , flanged adaptor for re usable coupling flange adaptor should be suitable for 7in hose assembly with coupling at one end and din standard flange for 6in deck elbow at the other end , eye plate for in haul line for probe fuelling pl 13 tonnes , snatch block with shackle open type , eye plate for lead block pl 19.5 t , snatch block cw shackle pl 8 t 3 nos to be used on either port or stbd side at one time , 7 in split clamps , c spanner for 7in reusable coupling , c spanner for 7in adaptor , nato 3 avcat reception coupling incl cap and flange suitable for , nato 5 fresh water reception coupling and cap , aluminium fuel filter
Tender For supply of hose connection for 3/8 inch bore (10 mm bore) length 500 mm sl. no. 6 and hose connecti on for 3/8 inch bore (10 mm bore) length 3300 mm sl. no. 12 as per draw no. icf/sk-3-5-517, alt u (both end swivel) as per annexure. from approved source. ]
Tender For hose connection for 3/4 inch bore in the length of 1100mm & 4 nos. of duplex nipples, (h ose end fitting shall be one end fixed & other swivel type ) specification as per sae 100r 1, test certificate for various test as per sae j343 shall be submitted along with supply. the house ends shall be provided with crimping suitable for high pressure confirming to that of house. the end fitting (male & fe male flareless type) shall be made from is-2062e250c, steel & shall be zinc electroplated to is:1573 grad e-2, the manufactures identification marks and month and year of manufacture shall be suitable printed or engraved, end fittings and adaptor threads should confirm to is-554, used in icf bogie of 1400 hp demu/ dpc [ warranty period: 30 months after the date of delivery ]
Tender For tender for supply of purchase of spares c c = - stop (plate no- b2-1-4 , sl no-29) , spring extension (plate xxv a) , buffer , mounting rear road light l oblique s(plate viii h) , knob excavator c oblique w switch as supplied(d1-8-35) , rubberhose(plate-l1-4-10) , door stay , plate door catch , sealing ring ce(ms-190) , relay f by r (ms sl-140) , brush spring(ms-191) , lock cover door lh (plate iv n) , pad wear 6mm upper colour red , lower door glass(ms sl-46) , pad wear 7mm upper colour blue , link 1.25 ton (plate xxxi y) , cab base mounting , pipe assy( plate no-a1-7-2 , sl no- 23) , buzzer(plate-c3-2-3) , hinge door (item no-305) , glass front quarter light left hand clear , glass right side quarter light(sl-378) , gaiter hand brake , glass front quarter light right hand clear(plate-b , glass left side quarter light , tube , ferrule for push rods , catch side window lockback (jcb 3dx super page-89) , bty cover (ms-67 , jcb u oblique v) , gaiter gear lever , leaver tipping (plate-vi t-1) , jug oil 200cc , glass six light l h side , side window glass(ms sl-55) , glass six light right side , glass six light rear , door seal left hand (item no-323) , door tinted glass lower , door tinted glass lower(sl no-322) , glass six light right rear side , latch assy inner rh(item no-341) , brush carrier assy(ms-192) , internal puller , glass tinted right (plate-iv r) , door tinned glass upper(item no-321) , door tinned glass upper(item no- 338) , brake shoe(ms-187) , l h cab door upper window glazing(sl-298) , grab sleeve , window tinted glass left hand side(super plate pla , step (plate - iii c) , rear window tinted glass (jcb super page-107) , wind screen(plate-b2-3-5) , window frame left hand slide (item no-354) , pipe exhaust exhaustion(3dx p3-4-2 sl no 14) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , grab sleev , swivel hook , door painted & sealed left hand(item no-320) , grab sleeve , grab sleeve , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , thrurst ring , silencer exhaust turbo(ms sl no 148 , apr-2015) , blank radio aperture (plate ix a) , t handle 1 inch sq drive(be220g fig no-8000) , windscreen front (jcb 3dx super) , liner roof assy (plate iv f) , frame outer rear window(jcb super p-105) , back up tool , roof moulding(plate-iv e-1) , tools kit (set of 41items) , assembly jig , fender rear lh (plate iii j) , kit piston ring o s 05 mm (plate xxxii f) , o ring (plate xxxii l) , seal rear oil (plate xxxii n) , gasket cyl head(plate xxxiii a) , seal bonded (plate xxxiii a) , valve inlet (plate xxxii b) , valve exhaust (plate xxxiii c)
Tender For supply of 20 mm id flexible corrugated stainless steel-304 with double ss wire breaded high temperature hose suitable for working pressure 20 kg/cm2 .at aboth end 26x1.5 orfs female swivel straight made out of ss-304 over all length 550 mm. make:own make equivale nt to plasser [ warranty period: 30 months after the date of delivery ]