Latest representative services Tenders | Government representative services Tenders

Central Government/Public Sector

CTN :39926247

12 Apr, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-424; e 089 the ship is fitted 02 in number sea water collecting tray above both das at engine room for protect from sea water sea water leakage observed from coll..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-424; e 067 da emergency sea water suction line punctured and cracked at various places same to be renewed repaired mat ss dia 50mm length 2 mtr; service provider,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-424; h 068 ship is fitted with 01 no water purifier make aoa the ro purifier generating hard non-drinkable water suspected ro purifier filter cartridge malfunctio..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-424; e 076 both main engine shaft protection cover to be fabricated in engine room and silencer battery compartment mat wire mess type with supporting angle lengt..,repair, mainten

State Government

CTN :39889192

14 Apr, 2025 3.00 Lacs

Rajouri - Jammu And Kashmir

Tender For rendering of service for providing of architectural structural design of rcc as per indian standard codes of practice and service including boq supporting with detailed estimate for construction of 15 nos shops each on ground n first floor

State Government

CTN :39889193

14 Apr, 2025 13.00 Lacs

Rajouri - Jammu And Kashmir

Tender For rendering of service for providing of architectural structural design of rcc as per indian standard codes of practice and service including boq supporting with detailed estimate for construction of govt degree college doongi, rajouri.

State Government

CTN :39855018

15 Apr, 2025 27.48 Lacs

Burdwan - West Bengal

Tender For supply and installation of electrical fixtures and gadgets in bolpur ib at bolpur under burdwan zone in west bengal. - supply & delivery of 3 phase 415v fixed speed cassette type air-conditioner machine having cooling capacity not less than 14100w, eer 2.7 to 3.2, noise level not more than 56db. this cassette type air conditioning machine should be fitted with scroll compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (make-o-general /mitsubishi electric/mitshubishi heavy industries as per approved by eic/authority)., supply & delivery of 240v split air-conditioner machine having cooling capacity not less than 6875 w, isser 3.8 to 4.39, bee rating not less than 3 star, noise level not more than 46db. this split air conditioning machine should be fitted with rotary compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (o-general /mitsubishi electric /mitshubishi heavy industries as per approved by eic/authority)., installation, testing & commissioning of the above-said split ac outdoor unit on existing iron structure and indoor unit on wall & mending good the damages as per direction of e.i.c., installation, testing & commissioning of the above-said split ac outdoor unit by fixing iron angle unit on wall & mending good the damages as per direction of e.i.c., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 3/8"(for discharge) 1.15mm thickness copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 1/2"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & laying of 4core 2.5sq.mm 1.1 kv insulation grade sheathed cu cable with gas line as per direction of eic for making interconnection/communication between indoor to outdoor unit of split type ac m/c.(make- havells/finolex/polycab as approved by e.i.c), supply and laying 5/8(20mm) heavy type pvc pipe for water drainage., supplying, fabrication & fixing of iron stand of m.s. angle size (40 mm x 40mmx6mm) for installation of outdoor unit of 4.0 tr split ac incl. drilling 2 nos holes in each angle and horizontal angle angle 40 mm x40mm x 6 mm in each stand. each stand will be properly fixing by supporting angle (25x25x5mm) and flushnut on peripheral wall as per machine configuration & load with adequate service access as per direction of eic, supplying and fixing 415 v four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection (a) 160 amp fp mccb (make legrand/crabtree/siemens/l&t/ abb as approved by e.i.c) [d-8/10], supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection (make legrand/crabtree/siemens/l&t/abb as approved by e.i.c) [d-6/7] (a) 6-32 amp tp mcb, distribution wiring in 1.1 kv single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make) incl. necy. fittings as required[e-14] i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ecc [e-14/ 1(a)(iii)], s & f 3phase 9-15a , 415 v dol starter (make-l & t ,cat no. ss94351 or equivalent model of abb/siemens as per dierction of e.i.c) to be fixed on wall with all fixing accessories complete as to g.s, suppl

Central Government/Public Sector

CTN :39875823

10 Apr, 2025 NA

Chandrapur - Maharashtra

Tender For supply of hollow and solid concrete blocks as per is 2185 (q3) mse exemption for years of experience/ + + // yes startup exemption for years of experience/ + + / % / % // yes document required from seller/ & & / / certificate (requested in atc),oem authorization certificate,additional doc 1 (requested in atc),additional doc 2 (requested in atc),additional doc 3 (requested in atc) *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no bid to ra enabled/ 1 %1 % 3& 3& 3 3 no type of bid/ 4 4 two packet bid primary product categoryhollow and solid concrete blocks as per is 2185 time allowed for technical clarifications during technical evaluation/ 5 5 / 7 / 7 7 days bid number/ & ( 8 ) : gem/2025/b/5988005 dated/ 3 : 30-03-2025 bid document/ / / 1 / 9 inspection required (by empanelled inspection authority / agencies pre- registered with gem) no evaluation method/ 5 5 ? ? total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ b state bank of india emd amount/ 26699 epbg detail/ advisory bank/ b icici epbg percentage(%)/ 4 (%)5.00 duration of epbg required (months)/ ef ( ). 14 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ + g % / 4/ % / % 4 b k 1 l (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , n f o 3 beneficiary/ n n : area finance manager western coalfields limited, chandrapur area (ref:- e- 1781888 ) (c shobarani) mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 2 / 9 1. if the bidder is a micro or small enterprise as per latest definitions under msme rules, the bidder shall be exempted from the requirement of "bidder turnover" criteria and "experience criteria" subject to meeting of quality and technical specifications. if the bidder is oem of the offered products, it would be exempted from the "

State Government

CTN :39844698

15 Apr, 2025 25.86 Lacs

Multi City - Telangana

Tender For fabrication and erection of ms supporting channel structure along with new cable trays from entrance of crown adit tunnel gate to column no 28 of service bay of el + 154.00mt (u/s side of eot crane beam) for running of armored cables for supply to the emergency distribution panel board (emdb) to be installed at el + 157.00mt (4th floor) of power house, slbhes.

CTN :39754787

09 Apr, 2025 NA

Gandhinagar - Gujarat

Tender For supply of automotive vehicles - pneumatic tyres for commercial vehicles - diagonal and radial ply as per is 15636 (q2) mse exemption for years of experience and turnover/ + + no startup exemption for years of experience and turnover/ + + / % / % no document required from seller/ & & / / certificate (requested in atc) *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no bid to ra enabled/ 1 %1 % 3& 3& 3 3 no type of bid/ 4 4 two packet bid time allowed for technical clarifications during technical evaluation/ 5 5 / 7 / 7 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no bid number/ & ( 8 ) : gem/2025/b/6062642 dated/ 3 : 19-03-2025 bid document/ / / 1 / 6 evaluation method/ 5 5 a a total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ required/ d no epbg detail/ required/ d no mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020. only class-i and class-ii local suppliers as per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 are not eligible to participate. however, eligible micro and small enterprises will be allowed to participate .the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023. om_no.1_4_2021_ppd_dated_18.05.2023 for compliance of concurrent application of public procurement policy for micro and small enterprises order, 2012 and public procurement (preference to make in india) order, 2017. 2. purchase preference to micro and small enterprises (mses): purchase preference will be given to mses as defined in public procurement policy for micro and small enterprises (mses) order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. traders are excluded from the purview of public procurement policy for micro and small enterprises. in respect of bid for services, the bidder must be the service provider of the offered service. relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. if l-1 is not an mse and mse seller (s) has/have quoted price within l-1+ 20% of margin of purchase preference /price band defined in relevant policy, such seller shall be given opportunity to 2 / 6 match l-1 price and contract will be awarded for 50 % percentage of total quantity.the buyers are advised to re

CTN :39654187

11 Apr, 2025 NA

Jodhpur - Rajasthan

Tender For supply of upper gastrointestinal video endoscope unit (v2) (q2) mse exemption for years of experience and turnover/ + + no startup exemption for years of experience and turnover/ + + / % / % no document required from seller/ & & / / experience criteria,certificate (requested in atc),oem authorization certificate *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no bid to ra enabled/ 1 %1 % 3& 3& 3 3 yes ra qualification rule50% lowest priced technically qualified bidders comprehensive maintenance charges required yes type of bid/ 4 4 two packet bid bid number/ & ( 5 ) : gem/2025/b/5980554 dated/ 3 : 11-03-2025 bid document/ / / 1 / 15 time allowed for technical clarifications during technical evaluation/ = = / ? / ? 3 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no evaluation method/ = = @ @ total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ c bank of baroda emd amount/ 100000 epbg detail/ advisory bank/ c bank of baroda epbg percentage(%)/ 4 (%)3.00 duration of epbg required (months)/ fg ( ). 62 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ + h % / 4/ % / % 4 c l 1 m (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , o g p 3 beneficiary/ o o : aiims jodhpur jodhpur, department of health and family welfare, all india institute of medical sciences (aiims), ministry of health and family welfare (aiims) mii purchase preference/ mii purchase preference/ no details of the competent authority for mii 2 / 15 name of competent authoritysher bahadur designation of competent authorityunder secretary office / department / division of competent authority procurement policy division, department of expenditure, ministry of finance ca approval numberno. f. 4/1/2023-ppd (pt.) competent authority approval date28-06-2024 brief description of the approval granted by competent authority relaxation for procurement of certain items through global tender enquiry - sl. no. 158 in the abovementioned order competent authority approval for not opting make in india preference : view document mse purchase preference/ mse purchase preference/ yes 1. purchase preference will be given to mses having valid udyam registration and whose credentials are validated online through udyam registration portal as defined in public procurement policy for micro and small enterprises (mses) order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of the purchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders are excluded from the purview of public procurement policy for micro and small enterprises and hence resellers offering products manufactured by some other oem are not eligible for any purchase preference. in respect of bid for services, the bidder must be the service provider of the offered service. relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 is not an mse and mse seller (s) has / have quoted price within l-1+ 15% (selected by buyer) of margin of purchase preference /price band defined in relevant p

Representative Services Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

State Government