Tender For digod to dobari - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, dismantling of flexible pavements dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per morth specification clause 202 by mechanical means bituminous courses & granular courses, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (penetration grade/modified bitumen) binder using plastic waste providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of aggregate and plastic waste cutting in a hotmix plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. (bitumen vg-30) (by mechnical means) waste plastic @ 8% of bitumen. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, providing and erecting typical citizens information board as per approved drawing & specification made of two ms sheet of
Tender For supply of repair of veh d d - solonoid , bendex , carbon brush , removing above parts and refitting with new parts labour charges , hand brake assy , self starter armature , field coil , eld shaft , labour charges for self stripping and unserviciable parts removing and self service new parts fitting and testing , engine overheating radiator assy change new fitting , engine collerremoving repair and service and cooling testing , the above mentioned parts removing the veh new radiator and coller fitting and checking testing mechanical charges , push rod , rocker finger , wall cap , nozzle , positioner , td piston , cam plate , tappet roller , tensioner , packing kit , all o rings washer and misc parts , pump stripping all parts cleaning and checking above metioned parts assy pump full assy injector, nozzle fitting, pump calibrating, testing with computerised machine mechanical charges , turbo charge repair service with burning, damage o rings packing parts chane turbo charger full over hauling fitting and testing , spider bearing , the above all parts removing the veh and after service pump turbo, push rod, rocker fingure wall cap fitting and pump all connecting pipe line fitting vah running and testing , km cable , side stand , tapet cover , oil drain nut , wheel bearing , dickey lock , broken parts welding works , front and rear parts , tail light assy , indicator assy , speedometer kit , side mirror , handle , loom set complete , shook abosrber , the above metnioned all parts removing and new parts fitting, vehicle running and testing mechanical charge , armature assy , the self starter stripping and checking all parts. above parts removing and new parts fitting and self starter assy and testing charge , self starter assy repair and service with burning and damaged parts and self testing , relay 12v and 24 v , clutch booster assy , 4x4 pressure line full checking and 4x4 sensor removing and service and fitting pressure testing rotary pump working pump removing the veh and taken to the pump house and pump , tapet roller , tesioner , oaking kit , the above mentioned all parts removing and checking including rotary pump all pipe lines removing and after pump service fitting pipe line connecting clutch booster fitting veh satrting and testing , all electical syste checking, burned looms relays change and veh electrical system testing mechanial charges , strater armature , brush and brush holder , labour charges for self stripping service and new parts soloniod bender assy and self testing mechanical charges , field coil , solonoid switch , the self starter cleanning above mentioned parts remvoing new solonid field coil soldering with brush and self assmbled and self testing labour charges , auxilary realy , battary cut of switch , above parts removing and veh starting checking electrical system all lights and lomms mechanical charges
Tender For repairs, maintenance and cleaning works of sewer line network by mechanical means for (03) years time period in sector -1 to 6, karanjade node.
Tender For tender for supply of laundry and cleaning service - servicing and checking of laundry plant including washer hydra and extractor and its accessories complete with the following a to check the all controller switches selector switch indicators main panel etc b to check the complete main switch panel contactors electical and mechanical spares c to check the power supply source testing of entire laundry plant without load and with load to check all system components reliable or obsolete note after replacement of the all defective components testing and funtioning of system should be carried out satisfactorily , supply only 0 60 timer , supply only 0 15 timer , supply only off delay timer , supply only water pressure switch , supply only contactor no 18 amp , supply only 30 kg washing bearing 22208 , supply only 30 kg washing sleev h308 , supply only 16mm gland dori 1 mtr , supply only breake pale assembly , supply only reverse and forward controller , supply only 30 kg hydro rubber buffer gasket , supply only hydro spring , supply only 6 mm pneumetic pipe 2 mtr with gland , supply only 3 mtr door gasket with sr 555 , supply only dryer heater 24 inch , supply only drier lupping , hydro motor rewinding , supply only mccb 4 pole , servicing spare fixing testing & commissioning charges
Tender For corrigendum : construction of equipment room at nrl rt - civil, structural & architectural, earth work in excavation (refer specification no. c-spc-103), earth work in excavation below ground level for all kinds of works in all types of soils except soft rock and hard rock as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting., for depth beyond 1.5m and upto & inclusive of 3.0m., earthwork in filling by excavating the earth from borrow areas arranged by contractor for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete., backfilling after execution of the work to proper grade and level with selected materials from available excavated soil from spoil heaps, including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete., transporting and disposing the surplus earth and debris including shrubs and vegetations from construction area to areas anywhere outside the plant boundary including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. for carting on the basis of truck measurements (volume of truck reduced by 30% for voids) disposal area s outside plant boundary to be arranged by the contractor .royalty as applicable for disposal outside plant limits to be borne by the contractor., plain & reinforced cement concrete (refer specification no. c-spc-104), providing and laying plain cement concrete for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 cement: 5 coarse sand: 10 crushed stone aggregates/gravels) with 40mm and down size graded crushed stone aggaregates/gravels.(all materials including cement supplied by contractor at their cost), providing and laying reinforced cement concrete of m-30 grade with 20mm and down size graded crushed stone aggregates/gravel in sub-structure of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, rcc pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever req
Tender For operation and maintenance of civil%2c electrical and mechanical services (internal and external)%2c fire fighting system%2c sanitary installations%2c wtp%2c stp%2c horticulture %2f landscaping%2c facade cleaning%2c lifts%2c dg sets%2c ac%2c stp and housekeeping services%2c etc
Tender For pm3 -changing of pv duct horizontal line to ss due to existing gi duct got damaged, erection of eye wash lines near chemical stations as the part of safety measures and cck starch supply line jam cleaning work at paper mechanical tnpl unit-i - pm#3 -changing of pv duct horizontal line to ss due to existing gi duct got damaged, erection of eye wash lines near chemical stations as the part of safety measures and cck starch supply line jam cleaning work at paper mechanicalin tnpl unit-i
Tender For corrigendum : providing of custom bid for services - btps ahs biennial contract for operation and maintenance of ash handling system of btps complete with mechanical electrical plc based c and i works and area cleaning for the period of two years 2026 2028