Latest resins Tenders | Government resins Tenders

Central Government/Public Sector

CTN :38566414

01 Jan, 2025 13.84 Lacs

Goa - Goa

Tender For supply of resins as per details mentioned in chapter 04

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

Central Government/Public Sector

CTN :38492497

27 Dec, 2024 41.80 Lacs

Gandhinagar - Gujarat

Tender For provn of furniture for 08 offrs 56 jcos/ors md accn at mil stn dharangdhra - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07)dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mmh.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs. make-amko or equivalent, bin linen multipurpose with ironing board(fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg., chair dining fd/map-ii/04 (fd/map-ii/04)dimension: overall size shall be 450mm wide x450mm deep and 950 mm height ,450mm high up to seat. description:- (a) all wood to be usd shall be 1st clas hard teak wood (b) the seat of chair shalll be made of 40 density foamcushion having thickness 75mm. the cushion shall be placed and pasted on 12mm bwr plywood as per size of seat duly covered with approved tapestry cloth of rate not less than450mm per mtr. the seat shall be be fixed over the rails and screwed from wood stopper with 30mm long screws.(c) pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. rest all specification and dimensions are as per drg. finish:- the chair shall be be polished in high gloss melamine polishin walnut shade after preparation of surfaces., hat stand with mirror large (fd-233)dimension:overall size shall be 1330 mm long, 710mm high.description:the inner frame shall be of 50mmx20mm teak wood battens six in nos .the back and front of frame shall be covered with 6mm thick commercial ply.the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,modiguard/atul) shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand.finish: all teak wood surfaces shall be given high gloss french polish with lacquer finish. all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drgs, peg table (fd-384)dimension; overall size shall be 450mm long,300mm wide and 380mm high.description: legs shall be of teak wood of section 30mmx50mm.the legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.two bottom rails of size 20mmx40mm shall be fixed between the legs .a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.top of the table shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table.finish: all wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.rest all as per drg., receptacle pvc small (fd/e6/map/13)dimension/capacity:-the receptacle shall be of capacity 20 ltrsdescription:the body of receptacle pvc shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided with swivel lid a

corporations/Associations/Others

CTN :38432855

06 Jan, 2025 NA

Mettupalayam - Tamil Nadu

Tender For purchase of acrylic resins

Central Government / Public Sector

CTN :38437133

31 Dec, 2024 NA

Multi City - Multi State

Tender For supply of battery for low maintenance lead acid loco battery of 75ah for locomotives , (ppcp container) confirming to rdso specification no.rdso/pe/emu/spec/0014-2000, rev.0, amendment nos.1 & 2 with vent plugs, complete with intercell connector in dry uncharged condition.

Central Government/Public Sector

CTN :38392520

18 Dec, 2024 16.50 Lacs

Goa - Goa

Tender For supply of resins as mentioned in chapter 04 of nit documents

CTN :38377543

18 Dec, 2024 NA

Dewas - Madhya Pradesh

Tender For tender for providing and fixing open jim upkaran at different gardan in ward no.03 dewas - item details, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4in

Resins Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector