Latest retainer plate Tenders | Government retainer plate Tenders

Central Government/Public Sector

CTN :40916940

07 Jul, 2025 NA

Agra - Uttar Pradesh

Tender For supply of stiffener plate of front carrier plate of aar-h type cbc coupler as per rdso dr awing no.rdso/cg/drg/24034 (1 no. set of stiffener plate consists of -01 number of stiffner p late , 02 numbers hexagonal head bolt m16x45 (as per is:1364), 02 numbers hexagonal castle nut m16 (as per din 935 ) & 2 numbers split pin size 4 x 40 mm as per is: 549) [ warranty period: 8 4 months after the date of delivery ]

Central Government/Public Sector

CTN :40917265

09 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For supply of item no: 1- paint anti corrosive bituminous black required for stiffener plate of cbc(specn. no .irs r6) to is:9862/81,with amendment no.1 of 1988 and reaffirrmmed1999 packed in new steel drums pla in (non returnable) 20 ltrs capacity to is:2552/79 grade b2 [ warranty period: 30 months after the date of delivery ]

CTN :40898893

14 Jul, 2025 4.50 Lacs

Thanjavur - Tamil Nadu

Tender For furniture items for hostel - furniture items, steel cot size - 72" l x35" w made out of 18g cr sheet & 4" 20g bottom stiffener plate of 4nos. and 1 1/4 cr square pipe legs with enamel painting, pvc bushes and necessary fasteners, plain table size: 30" x 20"x 26" height with 18 mm thick pre laminated board with 2 mm side pvc edge band finish and 25 mm x 25mm ms square pipe 18 gauge with enamel paint finish for frame and legs ., full arm plastic chair blue color, full arm

State Government

CTN :40861455

03 Jul, 2025 3.28 Crore

Sangli - Maharashtra

Tender For providing and supplying furniture to the various building at krantisinh nana patil government college for food technology, at peth, tal. -walwa, dist. sangli for mpkv rahuri - providing and supplying furnitures to the various buildings at krantisinh nana patil government college for food technology at peth, taluka walwa, dist sangli, for mahatma phule krushi vidyapeeth, rahuri ahilyanagagr, maharashtra, single bed @ 2025lx 1000dx 650h :- providing and fixing single bed of size 2025lx1000dx650 h with matress and pillow. under structure :-the legs are made of square tube of size 25x25 mm made out of ms with a thickness of 1.2mm. the legs should have corner brackets welded to it at two levels. the corner brackets are made of 2mm thick crca having a l shaped structure to join the side panels and head board to the leg . threenos .of horizontal stiffeners are provided at equal intervals. the stiffeners are made of square tube of size25x25mm made out of ms with a thickness of1.2mm. the middle horizontal stiffener has a leg at tached to it to transfer the load to the ground and add to the strength and stability of the complete structure. this legisal so made of square tube of size 25x25mm made out of ms with a thickness of1.2mm. all metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 microns dft. side panel:-the side panel sare made upof 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the over all width of the side panel is 150mm. the side panels have 18mm thick prelam particle board baton running for required lengtht oadd rigidity to the structure headboard: -the head board is made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000x650mm. footboard:-the foot board is made up of 18mm thick prelamparticle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 450mm. bedbase:-the bed base is made up of 12mm thick prelam particle board with both side white laminate., study/ computer table 400d x 1030w x 725h :-providing and supplying computer table as per approved design the table shal be of size 400d x 1030w x 725h including in built key board pull out tray for keeping keyboard of computer the table shall be made from 20mm prelaminated partical board . all edges are covered by 2mm thick pvc edge bands glued by hot melt glue applyed by auto edge bending machine. modesty panal made from 18mm both side prelaminated partical board all edges covered by 0.8mm pvc edge band gluve by hot melt glue applied by auto edge bending machinne, study/visitor chair :-providing and supplying nilkaml/ cello/ supreme make visitor chair of plastic with coushion for seat and back of with 55 cm depth 60cm and hight 80 cm with approximate weigth of 4 kg as per approved design and directed by engineer-incharge, dinning chair:-supplying and instalation of 6 seater dinning table of size : 1800mm w x 1200 mm d x 750 mm h with structural frame to be made in 35mm x 50mm x 1.6mm thick powder coated ms box section welded with ms champ made out at of 3 mm thick ms plate at corners. table top to be made up of 25 mm thick prelaminated mdf board conferming to is 14587:1998 table top to have 2 mm reious at the on all edges table fixed with the frame with required fitting solid wood leg to be made of 90mm x 90mm size with solid oke wood with adujustable metal leaveling screw (m10) at the bottom leg to be fixed to the structural frame with m8 philips head bolt. metal finish: all metal component to be structured matte black colour with powder coating more than 60 micron, all exposed wooden part shall be finish with good polish, wood finish with 2 coats of pu coating all wooden panel are stained to pass 4h test, di

CTN :40879488

02 Jul, 2025 2.50 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For bridge unloader - bridge unloader, 1. design, manufacturing and supply of heavy duty out door bridge for sugar mill plant cane unloading conforming to is:807-1976 & is:3177- 1977 fabricated from m.s. plate section conforming to is:226/2062 steel in box type design with and carriage fitted with wheel of fusion welded having l type bearing housing for long travel (lt) wheel assemblies having span-22.00 mtrs capacity -05ton swl along with dismantling of old existing bridge and erection and commissioning of new bridge old existing cross travel trolley will be used. type of bridge-m.s. plate fabricated box type span-22.00 mtrs, unloading capacity -05 ton swl2. techincal specification:-type of bridge -box type (m.s. plated fabricated), capacity-05 ton swl, unloading capacity -80 to 100 ton cane/hr, utility-sugar cane handling, height of top of top rail from ground-10.00 mtrs, height of lift-12.50 mtrs, wirerope19mm, 6/36 construction fibre wire, long travel speed -23-25 meter/minute, box side plate height-1250mm, box side plate thickness8mm, top & bottom plate thickness-top plate-12mm thick, bottom plate-10mm thick, top & bottom plate width-500mm, baff /stiffener plate spacing -750mm, baffle/stiffener plate thickness-8 mm., 3. end carriage:- length-5000mm, height-450mm, centre distance for end carriage wheel-4500mm,centre distance of trolley wheel as per previous trolly.4. long travel mechanism:- size of rail top at long travel- width-60mm, height-25mm, size of rail section at cross travel-width-60mm, hight25mm.5. electric motors for long travel drive 5.3hpx960 rpm rating s4 duty, qty-02 nos.6. gear box for long travel:- type helical,model-hb-350, ratio-40:1, service factor-greater than 2 on installed power, qty-02 no7. coupling for long travel drive:- type geared type half gear model1038. breaks:- thruster-electro hydraulic thruster 18 kg/cm , dia-6", qty 02 no., floating shaft dia/length-70mm/800mm-1000mm9. wheel:- dia meter-420mm, bearing-22218 skf/fag make, housing l type, qty-04 nos, note:- (i)fabrication will be done using prime plates and sections and using mig, welding process. (ii)only tack welding will be done by electrode using arc welding(iii) parallelist of the cross travel rails/square bar, diagonals, deflection of the bridge & trolley will be accurate and confirming to standard and best engineering practices. (iv) bridge must be two coated by red oxide metal primer and two coats of golden yellow colour.11. electric panel for new bridge, resistance boxes for bridge motors, control cabin,12. electric wires, main switch push button control & cable trolleys for complete13. unloader.14. dismantling of old trolly and all its accessories and erection & commission of new trolly, frame and fitting of all old spares ie. rope, drum, thruster break etc complete testing and trail., scope of work1. supply of above mentioned bridge on for basis to mill site.2. dismantling of old unloader. 3.erection of new unloader bridge with old trolley & grab with complete electric work with new electrical panel for bridge and all electrical panel for trolley & grab. all wiring should be new & standard isi make

Central Government/Public Sector

CTN :40874689

04 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of stiffener plate of front carrier plate for aar-h-type cbc with bdg as per drg. no. rdso/ cg/drg/24034, alt-1. note: 1. the item should be painted with rozc as per is 2074 followed by two c oats of synthetic enamel paint with dft up to 160 micron as per is 8662 (color green) [ warranty p eriod: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :40682553

04 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of stiffener plate of front carrier plate for aar-h type cbc with bdg as per rdso drg. no. rdso/cg/drg/24034, alt nil . note the item should be painted with rozc as per is 2074 followed by two coats of synthetic enamel paint with dft up to 160 micron as per is 8662 (color green) [ warran ty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :40849032

10 Jul, 2025 NA

Vadodara - Gujarat

Tender For stiffener plate of front carrier plate for aar-h type cbc with bdg as per rdso drawing no. rdso/cg/drg/24034, alt-1 along with fasteners item in set as per annexure-a. the material specification of stiffener plate should be as per is: 3885, pt-ii, gr-v & having hardness 245 bhn (max). the firm should submit the nabl test report of the material specification at the time of supply. [ warranty period: 30 mo nths after the date of delivery ]

Central Government / Public Sector

CTN :40850772

02 Jul, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of stiffener plate (8x135x410) of front carrier plate for aar-h-type cbc with bdg confirming t o specification no. is :3885, pt:-ii, gr-v and to rdso drawing no. rdso/cg/drg/24034. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40867043

08 Jul, 2025 NA

Siliguri - West Bengal

Tender For extra excise duty-spares for unit exchange consisting of 17 items of woodward governor: (1).compensating valve"o" ring to woodward pt.no.13 55053= 01 no. (2).bottom gasket to wooeward pt.no.206364=01 no. (3)."oring" for sight glass to woodward pt.no.1355351=01 no. (4).low tube plunger"o" ri ng to woodward pt.no.182298=01 no. (5).buffer spring to woodward pt.no.191791=02 nos. (6)."o" ring for elliptical to woodward pt no.1355117=01 no. (7).p ower case to column oil supply "o" ring to woodward pt.no.206148=01 no. (8).gasket,side pane to woodward pt.no.206584=02 nos. (9).shut down rod to woo dward pt.no.362391=01 no. (10)."o" ring for diaphragm cap to woodward pt.no.1355419=02 nos. (11).diaphragm cap to woodward pt.no.12913=01 nos. (12 ).lcr cover "o" ring to woodward pt.no.1355183=01 no. (13).leaf spring to woodward pt.no.19173802 nos. (14).oil seal to woodward pt.no.1364201=01 no. ( 15)."o" ring for serve meter to woodward pt.no.1355065=02 nos. (16).retainer plate(shaft lock) to woodward pt.no.3997035=01 no. (17).paper insulator to w oodward pt.no.203363=05 nos. as per drg.no. 13. leaf spring, oem no- 191738.14. oil seal, oem [ warranty period: 30 months after the date of delivery ]

Retainer Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors