Latest retaining pin Tenders | Government retaining pin Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38591692

30 Dec, 2024 NA

Hyderabad-T - Telangana

Tender For tender for 11kv polymer pin insulators with gi pins

State Government

CTN :38591693

30 Dec, 2024 NA

Hyderabad-T - Telangana

Tender For tender for 11kv polymer pin insulators with gi pins

State Government

CTN :38591695

30 Dec, 2024 NA

Hyderabad-T - Telangana

Tender For tender for 33kv polymer pin insulators with gi pins

CTN :38557750

01 Jan, 2025 3.45 Lacs

Gurdaspur - Punjab

Tender For supply of oil filter for genr set 30 kva , diesel filter for genr set 30 kva , air filter assy for genr set 30 kva , fuel filter for genr set 30 kva , air breather for genr set 30 kva , volt meter for genr set 30 kva , over flow pipe for genr set 30 kva , fan belt for genr set 30 kva , radiator cap for genr set 30 kva , solenoid for genr set 30 kva , fuel feed pump for genr set 15 kva , air filter for genr set 15 kva , piston ring set for genr set 15 kva , fuel filter for genr set 15 kva , fuel pipe line for genr set 15 kva , push rod tube seal for genr set 15 kva , tapper cover gasket for genr set 15 kva , bty terminal for genr set 15 kva , head gasket for genr set 15 kva , air cleaner assy for genr set 15 kva , air filter assy for genr set 15 kva , radiant fan for genr set 15 kva , radiator cap for genr set 15 kva , oil filter for genr set 7.5 kva with portable tower light , diesel filter for genr set 7.5 kva with portable tower light , air filter assy for genr set 7.5 kva with portable tower light , fuel filter for genr set 7.5 kva with portable tower light , tubelight led with complete fitting , flexible wire copper conductor , service cable , bulb 15 w , halogen bulb , cgi sheet 1800 x 1800 x 0.63mm , paint black , paint og , paint white , ceiling fan 1200 mm sweep , oil filter for portable tower light , air filter assy for portable tower light , diesel filter for portable tower light , benzo washer 17 oblique 19 no for portable tower light , benzo bolt 17 oblique 19 no for portable tower light , fuel filter for portable tower light , overhaul of genr set of portable tower light , aluminium window , ms steel window jail type , aluminium door with acp sheet , ms steel door jail type , ceiling tiles 2 feet x 2feet , main angle for ceiling , ceiling t 4 feet long , wall angle for ceiling , ceiling t 2 feet long , wire for ceiling , black screw for ceiling 3 oblique 4 ench , pvc insulated cable elect 1.5 sqmm , pvc insulated cable1 sqmm single core , switch socket combination 15 oblique 16 amp , socket 5 oblique 6 amp 5 pin , pvc door for bathroom , wash hand basin , pillar cock for wash basin , switch board 8 ench x10 ench , bath cabinet , corner shelf , cp bib cock 15mm , ewc , flushing cistern 10 ltr , ewc seat cover , jet spray , pvc connection 600mm long , shower rose , gi pipe 15mm , gi pipe 20mm

CTN :38542573

23 Dec, 2024 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of pcc pole 8.5 mtr. long,stp pole 11 mtr. long,stone pad ,11 kv v type cross arm,11 kv cross arm clamp with n&b,11 kv pin insulator,11 kv g.i. pin with n&b,f-bracket,earthing of pole,acsr rabbit conductor,acsr weasel conductor,11 kv xlpe cable 3x185 sq.mm.,11 kv cable jointing kit o/d for 3x185 sq.mm. cable,stay set complete,t-off channel,clamp for t-off channel,11 kv disc insulator,11 kv disc fitting,concreating of pole,danger plate complete,barbed wire gi 1/2 per pole,dismantling and removal of existing conductor/cable/gi wire from the various area preparing their coils and then stacking in the respective jes (store) as per direction of supervising engineer. it includes the work of cartage, cost of labour, t&p carrier etc. required for proper completion of work.acsr weasel conductor scrap,steel & scrap,g.i. wire scrap,11 kv 3x185 sq.mm. xlpe cable scrap

CTN :38604748

10 Jan, 2025 NA

Howrah - West Bengal

Tender For supply of o/h kit of brush holder assembly for traction motor hs15250a consisting of 08 items as following-(1) brush spring assembly complete in assembled condition to hitachi's drawing no.- 10s 77 8-713 (alt.-f)= 3 nos. (one assembly consists of item no.- 1,2,3 & 5= 3 nos. each and item no.- 4= 6 nos.), (2) adjusting pin to hitachi's drawing no.- 10t 806-970 (rev.-3)= 3 nos.(3) ptfe spacer to mod. sheet no.- elrs/ms/0329 (rev.-0) (ammendment-1)= 6 nos.(4) spring support to hitachi's drawing no .- 10t 806-972 (rev.-c)= 1 no. (5) spring support to hitachi's drawing no.- 10t 806-973 (rev.-c)= 1 n o.(6) arcing stud (bh side) to hitachi traction motor to rdso's drg. no.- skel-4707(alt.-1)= 1 no. (7) special washer to hitachi's drawing no.-10t 806-977(rev.-d)= 2 nos. (8) split pin l4 x50 (gi)= 3 nos. [ warranty period: 30 months after the date of delivery ]

CTN :38233080

18 Dec, 2024 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : tender for supply of digital haemoglobin meter , aed automated external defibrillator with adult smart pads , white leacture board with soluble marker and duster , o2 mask , air-supplied respirator , head mount , , rubber sheet 114 cm x 270 cm for use in hospital , ishihara colour vision chart with special plates for tests , near vision chart , eye chart , near vision reading test plastic chart , , plastic storage container 1100 ml size - 19 x 13 x 8 cm , , wall clock with silent sweep technology - 30 cm x 30 cm , wooden pen stand , barrel shape , body measuring tape with lock pin , glucometer strips , 50 pack , test strips meet iso standards , , 3 seater metallic public chair , right angle coupler 50 mm x 50 drop , swivel coupler of 50 mm x 50 mm , base plate , adjustable base plate having threaded screw , adjustable strip head small , adjustable strirrup head , adjustable strip head large , lecture stand fiber transparent , , metal bed without mattress with frame of gi pipe 40 mm dia

State Government

CTN :38589201

07 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of sec clip w_r type,clamping angle,clamping angle,bull dog clamp stainless steel grade 304 u clamp size 12 mm with inner dia 13 mm along with 10 mm nut and m10 spring washer,ss bolt dia 12x50_45mm,ss nut dia 16mm,copper split pin dia 4x40mm,g i bolt dia 24x70_54mm,g i bolt dia 16x100_38mm,g i bolt dia 16x260_57mm,g i bolt dia 16x260_60mm,g i bolt dia 16x360_57mm,g i bolt dia 16x65_38mm,g i bolt dia 16x260_100mm,g i bolt dia 16x360_80mm,g i bolt dia 16x360_100mm,g i bolt 16x50_37mm,g i bolt 16x320_100mm,g i nut dia 16mm,g i nut dia 20mm,g i lock nut dia 16mm,g i lock nut dia 20mm,g i flat washer dia 10mm,g i flat washer dia 16mm,g i flat washer dia 20mm,gi punched washer 22 mm,g i spring washer dia 10mm,g i spring washer dia 16mm,g i bolt dia 20x50_46mm,g i bolt dia 20x280_65mm,g i bolt dia 20x210_65mm,g i bolt dia 20x310_65mm,g i bolt dia 20x550_65mm,g i bolt dia 20x65_46mm,g i bolt dia 20x85_46mm,g i tappered washer dia 16mm,g i tappered washer dia 20mm,gi bolt 10x35_30mm,gi dia 10mm nut,gi 24mm dia lock nut,s

State Government

CTN :38582299

07 Jan, 2025 1.95 Lacs

Multi City - Chhattisgarh

Tender For procurement of ms pin, retainer plate & gi supporting strip for insulation of boiler & its auxiliaries of 210 mw bhel boiler of u # 1 of ph-i, htps, kwb.

Retaining Pin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government