Latest retractable belt post Tenders | Government retractable belt post Tenders

CTN :38957357

03 Feb, 2025 NA

Hoshangabad - Madhya Pradesh

Tender For tender for supply of chair dining , chair writing , sofa 5 seater , table 8 person dinning , table , side board , chair computer , table , safe meat , almirah small , almirah large , almirag large steel glass door , table office clerk , charpoy ip hard , book case steel glass door , ladder aluminium side rack with trays steel , plate rack , plate rack , hot case large , stand wash hand , desk , form without back , form with back , locker steel bed side

Central Government/Public Sector

CTN :38988226

27 Jan, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of degchi brass 16with lid , degchi brass 24 , gi bucket 2 gallon capacity , iron tub , knives 3 pcs set , dosa bhatti tawa iron , chimta iron , kadhai big , iron jharna , masaladani , meat safe , kadhai iron medium , atta chalni , hotcase steel big size basket chapatti , basin washing , idli maker stainless steel 144 pcs , mixer grinder , microwave , flour mixing machine 25 kg , roti maker machine 500-600 per hour , food warmer bane maries , digital weight machine , tea container , automated chimney commercial , food display steel table 2 per mess , food serving steel hotcase , lpg standing gas bhatti burner , tawa bhatti , deep freezer , refrigerator , steel utensil stand four shelves , vegetable cutter machine , serving bowl with cover , serving plates , plates thali , steel bowl , spoon , steel rack for vegetable , water cooler with ro capacity 120 ltr , garbage waste container with lid and strong wheel , emergency light , fly catcher , grinding stone

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

CTN :38921148

31 Jan, 2025 NA

Bardhaman - West Bengal

Tender For supply of cast steel non return valve with bypass,size 6inch , cast steel foot valve,size 6inch,body pressure 900psi , m seal hot compound with hardner , earth leakage relay with cbct,12v,1 to 750ma , intrinsically safe and bis certified audio visual alarm with dgms approved and bis certified , p.t.400va,550 to 220v 110v 24v 12v , isolator 200amp , bushing insulator with stud , turn buckle 10 tonne capacity , chain pulley block 10tonne capacity , lashing chain,0.75 inch, with test certificate,load bearing capacity 8 tonne , mccb,400amps,4 pole , fixed contact,cb200b1 , moving contact, cb200b2 , over load relay,300a 5 daspot , on delay timer,110v,ac,0.1 to 30sec , 3.3kv vulcanising rubber tape 6inchx10mtr per roll

State Government

CTN :38869775

20 Jan, 2025 1.0 Thousand

Jammu - Jammu And Kashmir

Tender For tender document for procurement of mining safety items required at coal mines, kalakot - mining safety items, mine safety led cap lamps :-intrinsically safe miners safety led cap lamp with external li-ion. rechargeable battery & with 1.5 metres. flexible cable for use in underground coal mines workers. dgms or other competent authority approval required. sample required, safety helmets :- high density polythene safety helmets (for use by underground coal mines workers) with v rib on top, complete with 4 point snap on anchor with textile suspension and adjustable moulded head band with p.p. chin strip. dgms approved or any other competent authority approval required. medium size varying from 540 mm to 590 mm. sample required, mining safety shoes :-(260 nos) (i). size 6 no. .( 04 pairs)(ii). size 7 no :(50pairs) (iii). size 8 no .(100 pairs)(iv). size 9 no.(70 pairs)(v). size 10 no. (36 pairs) direct mould shoes with steel toe cap. dgms approved or any other competent authority approval required with bis marked. is specification is-3976-2003, with latest amendments (for use by underground coal mines workers). sample required, multi gas detector :-to detect the hazardous gases present inside the underground coal mines, i.e.- oxygen (o2), methane (ch4), carbon monoxide (co) and hydrogen sulphide (h2s) (for use by underground coal mines workers). dgms approved or any other competent authority approval required. sample required strictly as per specifications mentioned

Central Government/Public Sector

CTN :38891648

28 Jan, 2025 45.95 Lacs

Jamnagar - Gujarat

Tender For provision of farniture for deficient sailors single living accn at ins valsura, jamnagar - "chair easydrg no. fd-229", "chair diningdrg no. fd-279", "chair writingdrg no. fd-280", "table without drawer (900 x 600 x 760)drg no. fd-284", "chair wooden bottom without armsdrg no. fd-285", "table (600 x 600 x 760)drg no. fd-293", "meat safe (small) drg no. fd-369", "hot case largedrg no. fd-402", "stool steel (305x305x510mm) drg no. fd-409", "table with drawer (steel) (900 x 600 x 760)drg no. fd-1008", "table cook (steel)drg no. fd-1019", "form without back drg no. fd-1027", "charpoy with hard top drg no. fd/map-ii/01 ", "table dining 06 personsdrg no. fd/map-ii/03", "receptacle drg no. fd/e6/map/13"

CTN :38863758

29 Jan, 2025 NA

Meerut - Uttar Pradesh

Tender For provision of 04 x fd ops room- work for 01 x fd ops room. the work consists of manufacture and supply of prefabricated mob ops room (veh mounted) of size 5.4.m x 4.80 m upto height of 2.44m and the shelter will consist of the fwg :- 2. 3. (a) the shelter would be of size 18 ft x 8 ft x 8 ft mounted on als extendable & extractable to provide hall of size 16 ft x 18 ft x 8 ft covered on three side with on end open (ref drawing no. 6) 4. 5. (b) the shelter should be mounted on flat bed als of size 16 ft x 8 ft (c) the shelter should be prefabricated and should have foldable wings for roof, floor and walls to provide a hall of size 5.4m x 4.80m x 2.44m i.e (18 ft x 16 ft x 8 ft) when all wings panel completely opened and on side of the same not enclosed. (d) opening and closing of wings should be operated through winches system manually. the base panel wings should be supported by adjustable manual jack system. (e) mechanism of opening or closing of wings will be based on operation of winches supported with manual jack system, to be functioned as under:- (i) opening the wings. the operator turns the winches handle, engaging the system to lift the top & bottom wings smoothly which are connected by steel wire rope. as the wing panels lifts, the adjustable manual jack at the base panel, are extended to provide additional support ensuring stability of the telescope structure. (ii) closing the wings. the operator when turns the winches handle in the opposite direction lowers the wing panels to closed position (see drg no 6). the adjustable manual jack can be gradually retracted to lower the base panel, ensuring controlled and smooth movement. (iii) the jack to be welded/bolted with base plate of size 300mm x 300mm x 10mm thick steel plate and the height of jack should be max of 6 openable. (iv) advantages: - (a) manual control - the winches system allow for precise manual control over the shutter movement. (ab) mechanical advantage - gears reduce the effort needed to lift or lower the wings. (ac) stable support - manual jacks provide strong and stable support for the base panel, ensuring safe and efficient operation. this mechanism of manual jack and winches system to ensure efficient, controlled, and fail safe operation of the wings. (f) tech staff of contractor to be present during assembling of shelter till its final taking over on charge by the insp team. (g) assembling and mounting of shelter on flat bed als to be provided by contractor as a onetime measure/initial demonstration till its final taking over on charge by the insp team. design criteria. (a) seismic co-efficient as per seismic zone iii. (b) wind load - equivalent to wind speed of 55 mtrs/sec as per is-875-2015 (reaff 2020). (c) roof slope -1:1.2. (d) external temperature (-) 10 0c to + 500c. (e) water absorption/penetration since, the shelter is removable and joints are not of permanent nature, flexibility in adoption of mechanism for sealing the joinery through appropriate means like silicon gel etc has been kept reserved for a later stage for optimum outcome during execution. however, the fwg mechanism would be adopted for sealing the joints. (i) rubber or silicon gaskets - rubber or silicon gaskets to be applied around the edges of the shelter panels and doors. it will be compressed to form a watertight and airtight seal when the shelter is assembled. (f) termite proofing all components of woods & puf to be treated for termite proofing. (g) ease of construction shelter should be modular in design. (h) design load as per is-875-2015 (reaff 2020)

CTN :38877783

30 Jan, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply and construction of uwe - conductor , supply and fixing for flameproof point wiring for one socket point controlled by one switch with 2.5 sqmm , supply and fixing for flameproof point wiring for one light point controlled by one switch with 1.5 sqmm pvc insulated , supply and fixing switch flame proof rotary type with termination box in lm 6 to 16 amp , supply and fixing socket plug and rotatory switch flame proof rotary type with termination box in lm 6 to16 amp , supply and fixing led light fitting 2x20 watt flame proof , supply and fixing led flood light fitting 150 watt flame proof , m and l for flame proof aviation obstruction light beacon with flasher complete all as directed. , m and l for flame proof intrinsically safe electronic hooter of voltage 230 volts ac complete all as directed. , earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick buried directly in ground , supply and fixing wiring for circuit or submain wiring in steel conduit , supply and fixing flame proof mcb db spn 230v 6 way horizontal double door , supply and fixing flame proof metal socket 3ph and neutral link 63 amp complete with rotatory plug and switch all as directed. , supply and fixing flame proof mcb db tpn 230v 12 way horizontal double door , supply and fix single pointed air termination copper rod 12 mm dia 300 mm long complete all as directed. , supply and fix copper strip 32 mm x 6 mm burried in ground complete all as directed. , test point terminal block made of gun metal or phosphorous bronge of size 75 x75 x 25 mm , m and l for flame proof wall mounted fan industrial type of size 36 inch 230 volts , m and l for flame proof exhaust fan industrial type of size 450mm 230 volts , m and l for chemical earthing complete with copper plate of size 90cmx60cmx5.0mm thick electrode , supply and installation of liquld cool silent diesel engine driven generating set 415 volts 3 phase 4 wire of capacity 125 kva , cement opc 43 grade packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hardcore 63 to 90mm , aac blocks 600x200x150 , mild steel bars of size 10mm dia , three phase 1.2 hp monoblock pump 430 volt complete as per atc , individual standalone plastic body smoke alarm with adequate provision , individual standalone plastic body heat alarm , fire extinguisher of min 20 kg wt dry powder type , pvc water sintex tank 5000 ltr cap three layers complete all as specified and as directed. , ppr pipe 50mm dia complete all as specified and as directed. , stone dust , coarse aggregate 40 mm graded , stone boulder 8 inch used in 300mm soling , bituminous joint filling compound grade b , bituminous joint filler baord 20mm thick , polythene film 150 micron thickness , recron , thermoplastic road marking paint , water based acrylic paint , wooden planks for shuttering 2nd class wood of size 3.0 x 0.30 x 0.026m , road delineator , design consultancy qr incl iit vetting , labour charge

CTN :38852610

28 Jan, 2025 NA

Gurdaspur - Punjab

Tender For supply of degchi aluminium with lid 10 inch , degchi aluminium with lid 12 inch , degchi aluminium with lid 15inch , degchi aluminium with lid 18inch , degchi aluminium with lid 25inch , parat stainless steel 18 inch x 12inch , tawa iron 20 inch x16 inch , bucket steel 10 ltrs , meat safe 3 feet x2 feet x3 feet , lpg stove single burner , pressure cooker 12 ltrs , pressure cooker 5 ltrs , meat choper , karchi iron 12 inch , karchi iron 18 inch , tea container stainless steel 20 ltr capacity , tea container stainless steel 10 ltr capacity , service tray large , water camper 5 ltr , water camper 20 ltr , chappathi warmer electric 4 tray stainless steel p 1200 , rice warmer electric stainless steel 20 kgs , plastic carates 2feet x2 feet x1 pt 5 feet , plastic carates 2 pt 5 feet x2 feet x1 feet , stove kerosene 4 nos burner , water jug steel , brass flower pot med , brass flower pot big

CTN :38813560

23 Jan, 2025 NA

Bardhaman - West Bengal

Tender For tender for supply of wire netting mesh blanket discharge rod cutting blade strecher hessian cloth - g.i.wire netting mesh 2 inch x 2 inch , 1.5mtr widthx5mtr length , made of galvanized steel wire 10swg , kintted without welding for use in underground roof support , blanket , fire , 5ftx6ft , discharge rod 11kv , 2meter , pvc handgrip , cutting blade 14 inch , stretcher hdpe spine board , size 6 feet x 1.5feet , hessian cloth 72 inch , chaser slider for m20 chaser machine , insulating rubber mat , 33kv , 3 feet x 6 feet x 0.5 inch , canvas fire fighting hose , size 3 inch nominal diameter 70mm , mass per meter length 470g , as per is4927 1992 , unslacked lime , packed in 40kg hdpe bag , purity 98 percent , white , state solid , chaser die head 0.75 inch , for m 20 chaser machine , sensitive e l relay with cbct 750ma , intrinsically safe and bis certified prestart audio visual alarm as per is iec 60079 11 2011 and is iec 60079 0 2017 with dgms approval and bis certified flame proof power source unit rating 550v 110v to 15v ac as per is iec60079 1 2014 and is iec 60079 0 2017 for belt conveyor , men in position switch foot switch , mccb , 300 to 400 amps , 4 pole with shunt trip coil and micro processor , 440v , auxiliary contact , 110v , 2no plus 2nc , blow down valve , size 2.5 inch with ibrtc , cast steel non return valve with bypass , size 6inch , body pressure 900psi , seat pressure 750psi , thread fitted ph.bronze seat , minimum weight 120kg , with mfg tc. , led flood light , 150watt complete set , 300a , power contactor , aux contact , 220v , 2no plus 2nc , hrc fuse , 6amps , hrc fuse , 16amps , ms stud , 12mmx90mm with nut bolt , oil seal 75x100x10 , oil seal 60x80x10 , oil seal 80x110x10 , 08 pin , 24v , ac relay , pla , 08 pin , 24v , dc relay , pla

Retractable Belt Post Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector