Latest retractable belt post Tenders | Government retractable belt post Tenders

Central Government/Public Sector

CTN :41832959

06 Oct, 2025 8.00 Lacs

Jamnagar - Gujarat

Tender For tender for supply of complete dinner set & glasses, make-calio or miton or equivalent, thermos flask of 1 litre capacity, make-calo or milton or equivalent, electric kettle of 1 litre capacity, maka-philips or bajaj or cromptoni or equivalent, tea set (cup-06 nos, saucer-06 nos, tray-01 no. tea pot-01 no. sugar pot-01 no, milk pos-01 no), make-cello or milton or equivalent, decorative flower vase, material ceramic/terracotta or superior, steel almirah shelving cabinets, no. of door- 02. no of shelves-04. almirahheight(excluding the height of pedestal) +/-5mm-1855mm, almiran width +/-5mm-910mm, almirahdepth +/- 5mm 480 mm, sheet thickness of back, top, bottomis 1mm, shelves sheet thickness-0.9mm, shelves supporting bracket thickness-1.6mm & door metal stiffener thickness 0.8mm with minimum 01 year warranty, customize table wooden 63, ro plant 50 lph with one year warranty, supply of computer table with key board drawer & table top conforming following specification:-1) dimensions: length: 915 mm 15 mm, depth: 400 mm +10 mm, height from foor surface 760 mm -10 mm, 2) material of table top, key board & drawer: mdf board of grade ii of is 12406 or latest, 3) material of gable end & modesty panel: flat single layer pre laminated mdf board conforming to having designation plmdf-23 of 18 14587 or latest, make nilkamal, godrej durian, pepper fry & urban ladder, small aimerah steel size 50 inch x 30 inch x 17 inch, file storage stder(15x36x80), customize table (wooden 7 x 3.5 ft width eru) make: -godrej or similar, revolving chair with high back with arm, cushioned and with pu handles with hydraulic system and castor wheel make godrej or similar, visitor chair with handle supported 32 density foam at seat and back with foam leather make godraj or similar, domputer chair with handle with cushion seat & back, visitor chair with handle supported cushion on seat and back, computer table size 4" x 24", wooden office table with lamination size 48" x 24" one side, three drawer, wooden office table size 60x30x30, 151 plywood use in table with lamination, drawer, self and key board, steel table size 48 x 24, one side three drawer and other side cabinet with self, 22 gauge make godrej or similar, office almirah steel shelving cabinet, height: 1855, width: 910mm, depths 490mm, generally confirming to bis specification is 3312:2021 (with latest amendment), construction type: welded, installation: free installation pedestal: yes, pedestal height: 125mm, door type: hinged, number of door 02 door, number of hinges (for each door) 3. door stiffner up to full door height provided, shelves required fixed, number of shelves required: 5 steel sheet material: mild steel sheet conforming hr 110 15 1079: 2000 (with latest amendment), screw. confirming to 18 1365 stuffher material m.s. sheet, steel almirah locked: six lever lock, colour of firssh: ash grey, duplicate key: yes, steel almirah locking machanism: a three way bolting device controlled by a lock door handle material for almirah lock: nicol chromium plated cast iron, finish powder coating with 50 micron thickness minimum warranty period: 30 months from the date of supply, steel chair perforated seat and back with handle, supported, revolving chair with chrome plate base with pu cushion and with pu handles with hydraulic system and castor wheel make-godrej nilkamal or similar, tea set 15 pieces made of bone china superior quality with flowery design brand: hcpl or similar bone china

State Government

CTN :41179850

25 Sep, 2025 16.50 Crore

Bengaluru - Karnataka

Tender For corrigendum : supply of surgical instruments - nerve hook, (blunt tip) 9 1/2 125 degree angle, nerve hook, as per ot sample (blunt tip) 9 1/2 90 degree angle, additional instrument for mics nitinol soft tissue retractor for valves with sterlization and storage tray. (refer specification as per 6.3 of bid document), additional instrument for mics chordae measurer 200-350mm length (should be made of high grade surgical steel). (refer specification as per 6.2 of bid document), additional instrument for mics schaffers calliper for aortic valve (refer specification as per 6.1 of bid document), soft tissue retractor for mics should be usable in all minimal thoracotomy (refer specification as per 5.1 of bid document), small & medium sizes disposable bulldog should be quoted with15 each and price to be quoted separately. (refer specification as per 4.1 of bid document), bulldog medium angled for mics (refer specification as per 3.3 of bid document), bulldog small angled for mics (refer specification as per 3.2 of bid document), sterilization container for long instrument (refer specification as per 3.1 of bid document), side bitting aortic curved clamp for coronaries (stainsky type) for mics,cabg (refer specification as per 2g of bid document), reusable mics aortic punch for coronaries with blade/punch are of size 4.5mm (refer specification as per 2f(iii) of bid document), reusable mics aortic punch for coronaries with blade/punch are of size 4.0mm (refer specification as per 2f(ii) of bid document), reusable mics aortic punch for coronaries with blade/punch are of 3.5mm size 3.5mm (refer specification as per 2f(i) of bid document), long mics clip applicators, for coronaries with small clip (refer specification as per 2e(ii) of bid document), retractor system for coronaries with blade guide, coupling rider, ima blades in different length and width, retracting blade in different sizes, should be able to facilitate lima & rima harvesting. 01 (refer specification as per 2d(i) of bid document), long scissors for coronaries curve of 125 degree (refer specification as per 2c(iii) of bid document), long scissors for coronaries curve of 45degree (refer specification as per 2c(ii) of bid document), long scissors for coronaries mildly curved (refer specification as per 2c(i) of bid document), long mics needle holder for coronaries curved shape (refer specification as per 2b(ii) of bid document), long mics needle holder for coronaries straight (refer specification as per 2b(i) of bid document), long mics forceps for coronaries curved shape. (refer specification as per 2a(ii) of bid document), long mics forceps for coronaries straight. (refer specification as per 2a(i) of bid document), flexible spatula for mics mitral valve procedures to be used with spreader (refer specification as per 1i(ii) of bid document), mics retractor system for mvr/avr/asd should comprises of retractor frame which can attach various blades (refer specification as per 1i(i) of bid document), long mics suture hook for mvr/avr/asd with the length between 34-350mm along with separate handle (refer specification as per 1hi of bid document), long chitwood mics aortic clamp for mvr/avr/asd non-traumatic forceps in jaw dimensions of 2.8 x 70 mm and overall length 290mm (refer specification as per 1g(ii) of bid document), long chitwood mics aortic clamp for mvr/avr/asd non-traumatic forceps in jaw dimensions of 3.5 x 50 mm and overall length 330mm (refer specification as per 1g(i) of bid document), long mics nerve hook for mvr/avr/asd (refer specification as per 1fi of bid document), long mics clip applicators for mvr/avr/asd medium clip diameter of 5.0mm (refer specification as per 1e of bid document), long mics knot pusher for mvr/avr/asd 25â° angled shape (refer specification as per 1d(i) of bid document), long mics scissors for mvr/avr/asd curved shape (refer specification as per 1c(ii) of bid document), long mics scissors for mvr/avr/asd straight (refer specificatio

Central Government/Public Sector

CTN :41826761

03 Oct, 2025 1.11 Crore

Port Blair - Andaman And Nicobar Islands

Tender For 81069/e8 provision of storage yard for steel and other yard materials (industrial gases) under ge (p) north at sri vijaya puram

State Government

CTN :41865487

26 Sep, 2025 NA

Multi City - Multi State

Tender For supply of steel filing cabinets for general office purpose (v2) as per is 3313,steel shelving cabinets (adjustable type) confirming to is 3312 (v4),metal storage cabinet,computer table (v2)

CTN :41675665

19 Sep, 2025 NA

Tiruvallur - Tamil Nadu

Tender For bid to ras supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , towel rail / ring for bathroom (q3) , soap dish - case (q4) , waste fittings for washbasin and sinks as per is 2963 (q3) , stainless steel shelf rack (q3) , bathroom or toilet mirror (v2) (q4) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , flushing cistern (q3) , waste pipe (q3) , connection pipe with nuts (v2) (q3) , floor drain traps (q3) , toilet seat covers (v2) (q4) , rotational moulded polyethylene water storage tanks (v2) conforming to is 12701 (q3) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , sinks (q3)

CTN :41843104

24 Sep, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of mta ii e e--2.5 sqmm black sc 90 mtr make finolex oblique plaza oblique polycab oblique havells , pvc copper cable 2.5 sqmm green sc 90 mtr make finolex oblique plaza oblique polycab oblique havells , pvc copper cable 2.5 sqmm red sc make finolex oblique plaza oblique polycab oblique havells , pvc copper cable 4 sqmm green sc 90 mtr make finolex oblique plaza oblique polycab oblique havells , submersible motor 5 hp 3 phase with starter and 3 phase copper 2 and half sqmm 60 mtr wire , ss jali and half inches angle cock wall , cgi sheet 10 feet by 3 feet , pvc swich bd 8 x 10 make havells oblique anchor , pvc switch bd 4 x 6 make havells oblique anchor , pvc tape insulation 25 mm wide 9 mtr long make steelgrip oblique anchor oblique kinjal , socket 3 pin 16 amp make anchor oblique havells oblique legrand oblique indo asian , socket 3 pin 6 amp make anchor oblique havells oblique legrand oblique indo asian , street light led 120w make philips oblique syska oblique bajaj oblique havells , street light led 30w make philips oblique syska oblique bajaj oblique havells , street light led 60w make philips oblique syska oblique bajaj oblique havells , sunmica bd with wooden bd 4 x 4 , sunmica bd with wooden bd 4 x 6 , sunmica bd with wooden bd 8 x 10 , switch 15 oblique 16 amp make havells oblique anchor oblique bajaj , switch 5 oblique 6 amp make havells oblique anchor oblique bajaj , switch socket combination 5 pin 16 amp with gang box make anchor oblique havells oblique legrand oblique indo asian , switch socket combination 5 pin 6 amp with gang box make anchor oblique havells oblique legrand oblique indo asian , smoke alarm , xlpe insulated pvc seathed heavy duty armoured multi core cable 6 sqmm 2 core aluminum conductor for working , xlpe insulated pvc seathed heavy duty armoured multi core cable 10 sqmm 2 core aluminum conductor for working voltage , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage 1100 volt , xlpe insulated pvc sheathed heavy duty armoured multi core cable 35 sqmm 3.5 core aluminium conductor for working voltage , xlpe insulated pvc sheathed heavy duty armoured multi core cable 50 sqmm 3.5 core aluminium conductor for working voltage , fd water heating tank 500 ltr with motor bhatti , water hammam 50 ltr , ppr socket outer dia 40 mm , silicon tape , insulation for 40mm outer dia pp r pipe pn 20 oblique sdr 63 layers of size 28mm x 19mm with isi mark , insulation for 32mm outer dia pp r pipe pn 20 oblique sdr 63 layers of size 28mm x 19mm with isi mark , glass shelf of toughned glass with chromium plated steel frame , corner shelf of toughned glass with chromium plated steel frame , cp towel rail 600mm long 20mm dia , waste pipe for wash basin , pvc s trap 75mm make prince oblique supreme with isi marked , pvc sheet green , m seal 200 gm pkt make pidilite oblique fevicol oblique m seal , cp bib cock 15mm short body make cera oblique prayag oblique polytap or equipvalent , cp bib cock 20mm make cera oblique prayag oblique polytap or equipvalent , distemper , plastic emulsion paint make asian nerolac , waste pipe for urinal pot , alu tower bolt 75mm with isi marked , looking mirror frameless of size 600x450x5mm with 4mm ply baking make prayag oblique saint gobin oblique modigaurd , puff wall panel 2900x 1000mm both side white , vitreous china wash hand basin white flat back size 550 x 450mm long pvc connection with ptmt nut 1m long pvc flexible waste pipe and bracket for holding whb , wc indian type make cera oblique hindware //bid details 3 / 110 oblique parryware , european wc with s feet or p feet trap concealed of size 650 x 405 x 770mm with sheet cover make cera oblique hindware oblique parryware , vitreous china dry urinal bowl flat back water free odour free stain free white colour with coupling including hdpe waste pipe and fixing accessories complete , looking mirror with pvc frame 21 x 15 , hdpe water storage tank 1000 ltr 3 lay

CTN :41861828

26 Sep, 2025 NA

Multi City - Multi State

Tender For supply of 3 tier dumbeel rack storage for hex dumbbells , high grade solid steel rod 5 ft , battle 38mm basics exercise rope 15 mtr , rubber yoga mat 4 mm , double side alloy steel hammer big , multipurpose gym vertical weight plate storage rack , alloy steel vertical barbell holder stand , synthetic leather punching bag , light contest pu boxing gloves , black anti slip handle adjustable skipping rope , rubber fod mat 5-3.5mm , gym mirror glass 5.5x6

CTN :41828179

22 Sep, 2025 NA

Delhi - Delhi

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , connection pipe with nuts (v2) (q3) , bathroom or toilet mirror (v2) (q4) , bathroom water shower (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , toilet seat covers (v2) (q4) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , flushing cistern (q3) , rotational moulded polyethylene water storage tanks (v2) conforming to is 12701 (q3) , soap dish - case (q4) , stainless steel shelf rack (q3) , sinks (q3) , towel rail / ring for bathroom (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3)

CTN :41876639

27 Sep, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of two tier sleeping bunks as per specification and drawing attached as pdf. , single piece cushion made of 100 mm thick puf foam as per specification and drawing attached as pdf. , single tier sleeping bunk as per specification and drawing attached as pdf. , ms steel locker as per specification and drawing attached as pdf. , office chair with cushion and rubber hand rest as per specification and drawing attached as pdf. , mild steel chromium plated curtain rod 20mm dia with round end at each opening as per specification and drawing attached as pdf. , provision of shoe storage bench of 2-tier shoe rack to store up to 4 pairs as per specification and drawing attached as pdf. , provision of pulley operated cloth drying system of 6 feet long hdpe pipe as per specification and drawing attached as pdf. , bed side table as per specification and drawing attached as pdf. , office steel table as per specification and drawing attached as pdf. , portable table lamp 9w with bty as per specification and drawing attached as pdf. ) /bid number : gem/2025/b/6695475 * /dated: 17-09-2025 & & / bid document 1 / 16

CTN :41891516

29 Sep, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of two tier sleeping bunks as per specification and drawing attached as pdf. , single piece cushion made of 100 mm thick puf foam as per specification and drawing attached as pdf. , single tier sleeping bunk as per specification and drawing attached as pdf. , ms steel locker as per specification and drawing attached as pdf. , office chair with cushion and rubber hand rest as per specification and drawing attached as pdf. , mild steel chromium plated curtain rod 20mm dia with round end at each opening as per specification and drawing attached as pdf. , provision of shoe storage bench of 2-tier shoe rack to store up to 4 pairs as per specification and drawing attached as pdf. , provision of pulley operated cloth drying system of 6 feet long hdpe pipe as per specification and drawing attached as pdf. , bed side table as per specification and drawing attached as pdf. , office steel table as per specification and drawing attached as pdf. , portable table lamp 9w with bty as per specification and drawing attached as pdf. ) /bid number : gem/2025/b/6697065 * /dated: 17-09-2025 & & / bid document 1 / 16

Retractable Belt Post Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government