Latest retro reflective sheet Tenders | Government retro reflective sheet Tenders

CTN :39897951

15 Apr, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of automotive vehicles - retro - reflective sheets and tapes (traffic safety) as per is 14221 (q4)

State Government

CTN :39886559

07 Apr, 2025 90.31 Lacs

Noida - Uttar Pradesh

Tender For provide & fixing of road safety item on road between sector-62 and 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar

corporations/Associations/Others

CTN :39874120

21 Apr, 2025 23.06 Lacs

Ahmedabad - Gujarat

Tender For supply of automotive vehicles - retro - reflective sheets and tapes (traffic safety) as per is 14221 (q4)

Central Government/Public Sector

CTN :39860769

22 Apr, 2025 NA

Pune - Maharashtra

Tender For supply of retro reflective whistle board for curve /cuttings/ tunnels of 600 mm x 600 mm dimen sion ,2 mm thick aluminum alloy retro reflective sheet with back support angle 25 x 25 x 3 mm .third party inspection. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39849298

16 Apr, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of retro reflective sheet yellow

CTN :39824094

23 Apr, 2025 NA

Satna - Madhya Pradesh

Tender For invitation of rates equipment/tools - invitation of rates equipment/tools, arc welding machine 300 amp (single phare), welding rod brass 10 no., lathe machine admit between centres 18 inch, 2hp, 8 feet, bench vice fix base 150mm, beacon light (12v,36w), engine crane with stand (2ton), pipe vice 150mm, aluminium welding rod 10no., hose winding work (brass), brass washer 100gm, butterfly valve 1 , butterfly valve 3 , butterfly valve 4 , cabin light (12v,35w), fire proximity suit ( heavy duty), flex head ratchet inch, helmet with shield ( heavy duty), fire pump shaft (1800ipm), fire pump shaft (2250ipm), fire pump shaft bearing long (1800 ipm), fire pump shaft bearing long (2250 ipm), fire pump shaft bearing small (1800 ipm), fire pump shaft bearing small (2250 ipm), fire pump oil seal 1800ipm, bent handle flex ratchet , electric wire copper 3mm, electric wire copper 4mm, electric wire copper 5mm, hood light for car/ vehicle repair 15w rechargeable, fire pump (1800 ipm gunmetal), fire pump (2250ipm gunmetal), fire pump ampeller (1800 ipm gunmetal), fire pump ampeller (2250ipm gunmetal), fire pump bush set (1800ipm), fire pump bush set (2250ipm), fire pump carbon seal (2250ipm), fire pump carbon seal ( 1800lpm), fire pump carter seal (1100ipm), gi wire 4mm 100gm, hinge (steel) 3 (heavy duty), hinge (steel) 4 (heavy duty), hinge (steel)3 (heavy duty), hinge (steel)4 (heavy duty), hinge ( brass) 2 ( heavy duty), hinge ( brass) 2 ( heavy duty), lock handle set (aluminium)( heavy duty), lock handle set (brass)(heavy duty), male female rubber washer 63mm, p.t.o. gear for 1800 ipm pump (gunmetal), p.t.o. gear for 2200 ipm pump (gunmetal), pa amplifier 30w, t socket spanner (7mm to 14mm) complete set, hexagonal universal wrench, p.t.o gear for 1100 lpm pump, ply water proof (12mm)( heavy duty), red oxide primer, relay 12v 10 amp., relay 12v 15 amp., rexine (4mm), rust remover 100ml, sand paper 100no. 20cmx5cm, sand paper 80no. 20cmx5cm, wired speaker 15w, nose plier all types complete set, silicone sealant 100g, epoxy hardner, thermocol sheet (1 ), epoxy primer, pu sealant gun, vehicle wire 4mm, vehicle wire 5mm, vehicle wire 8mm, blinker light 12w, epoxy thinner, 4 way wheel wrench all complete set, 4 way feet drill machine with 1hp motor, thermocol sheet 5mm, sponge 100mm, b.a set, carbon seal, surfacer paint, radium work, goti pana 50 no., goti pana 55no., goti pana 65 no., noke plass small, high expassioan foam compound, hathodi 1kg., grindir kulti, gearbox theli, hathodi noke 1kg., tomy small, 6&7 to30&32 ring spanner, 6&7to 30&32 3 set patti spanner, 41&46 ka patti spanner, steel bench vice with swivel base multi vise tool 7kg, screw driver large, screw driver small, smooth file tool 1 inch, drill machine small, arc welding machine 300amp (single, double and triple phare, tin cutter large, tool box (1.5 2 1 feet), fire pump carter seal (1800 ipm), tool box(2 3 2 feet), bunk bed (8 3 6 feet), allen key 12 no., half round file 1/2 inch, welding rod brass 8 no., led tv full hd 85 touch panel, display mount arms heavy matel based arm for hanging led and panels, console mic setup with headphone stand table mic with clear voice and headphone, sound system with slick and bar multi sound system with wall hang moniter sound box, cabels with arrange kit multi cabels for setup ex hdmi,lan ,post,vga, wifi mini power bank wifi mini power bank for devices in case of electric off, acoustic sound panels heavy panel with fome matereal, software mangment software, base transrevicer base transreciver wireless, ptz cam ptz cam with max 500 mt vision, drone drone 4k shoot, data server box 10tb min data server box, network booster network booster with low bandwith working mode, gps gps with low latency, fuel sensor fuel sensor working with max accuracy, dashboard radio vehicle mounted radio, voice msg sytem multi voice 1 min msg system, long vision digital cam long vision digital cam 360 view, multi user app system multi app login ap

CTN :39802609

01 Apr, 2025 NA

Rangiya - Assam

Tender For supply of retroreflective sheet red colour high intensity retro reflective sheet 3 mm thickness, size 4 ft 750 ft. colour [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39788517

07 Apr, 2025 NA

Hubli - Karnataka

Tender For item description speed indicator board size (1 meter equilateral triangle) fabrication and supply of engineering speed indication indicator 1000 mm equilateral triangle board made up of retro reflective sheeting of high intensity prismatic grade hip type iv to astm 4956 specification on 2mm thick aluminum alloy sheet 14 gauge confirming to is 736 in size and shape using heat lamp vacuum application method along with back support of 25mm x 25mm x3mm angle iron including cutting, riveting and fixing th e angle leg 75mm x 75mm x 6mm size 3500mm long from the bottom of main board painting of angle iron support with two coats of enamel paint over one coat of primer the size of board, ( 10kmph- 02 nos, 15 km ph-05 nos , 20kmph- 10 nos, 30 kmph- 10 nos, 40kmph- 10 nos, 45kmph- 15 nos, 50 kmph- 10 nos ,60 k mph- 15 nos75 kmph- 05 nos, caution indicator boards- 82 nos and t-boards- 82 nos . [ warranty perio d: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :39788738

25 Mar, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of retro reflective sheet yellow, type- i (engineering prismatic grade sheet) width- 04 feet . make- dm, m.tech, retlomax or similar. material as per sample attached. [ warranty period: 30 mon ths after the date of delivery ]