Latest rewinder machine sale Tenders | Government rewinder machine sale Tenders

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

CTN :39651645

01 Apr, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of p1/4071752 cylinder pressure chamber

State Government

CTN :38677463

24 Mar, 2025 6.63 Crore

Jaipur - Rajasthan

Tender For corrigendum : two year rate contract for supplying of disposable laboratory items - disposable plastic test tube for cross matching without label; size 13 x 75 mm; capacity 5 ml; pack size :-1 x 100, sample tube for auto analyzer; size 13 x 75 mm; pack size :-1 x 100, sample cup for auto analyzer for i lab; pack size :-1 x 100, disposable micro titer pipette tips up to 200 l; color white; pack size :-1 x 1000, disposable micro titer pipette tips up to 1000 l; color blue; pack size :-1 x 1000, disposable micro titer pipette tips 0.5 to 20 l; color any color; pack size :-1 x 1000, disposable micro titer pipette tips 30 to 300 l; clear graduated; pack size :-1 x 1000 (yellow), transparent plastic sample tube for processing for urine with label and without cap; size 13 x 100 mm; capacity 7 to 8 ml, capillary glass tube for c.t. 75 mm in length, uniform base without anticoagulation; pack size 1x100, micro cover slip for urine for no. 1; square size 18x18 mm smooth edges transparent without any spot; pack size 1 pack = 20 x 10 gms, haemocytometer cover slip no. 1; (size 20 mm x 26 mm x 0.4 mm), new improved neubaur counting chamber having silver coated 9 mm 2 ruled area (for counting wbcs & rbcs), glass marking pencil (red, white, green, blue), glass slide: size length 75 mm, width 25 mm +/- 1.0 mm, thickness 1.35 +/- 0.1mm clean and transparent with ground edges & lint free packing; pack size 1 x 50 iso/ce certified, container for urine, sputum, stool sample collection, leak proof with wide mouth, conical wide bottom & screw cap, 50 ml capacity with label for patient name, ward/opd and registration number, pack size 1 x 100 (urine container), esr disposable pipette with tube, tube 12 x 75 mm clean transparent with graduation at 0.4 ml and 2 ml should allow to fill by air pressure through the rubber piston blood lift up up to zero level. pipette should be made with transparent polystyrene with graduate d scale 0 to 180-200. it should be fine finished; pack size 1 x 100, evacuated blood collection tube with spray dried k2edta with lavender safety closure. it should be made of clear latex free polyethylene terphthalate. size 13 x 75 mm with 4.0 ml, volume capacity. batch wise sterility/pyrrogenicity/toxicity certificate should be given. it should be us-fda/ce certified. firm should provide training to technicians/nurses regularly for blood collection. clinical services should be documented by company. pack size 1 x 100 ( edta vials), sodium citrate evacuated tubes for coagulation test with vacuum (with na. citrate 0.109 m/3.2% plastic tube made of clear latex free polyethylene terphthalaste with light blue safety closure, 13 mm x 75mm vol. 2.7 ml. batch wise sterility/pyrogenicity/toxicity certificate should be given. it should be us fda/ce certified, firm should provide training to technicians/nurses regularly. clinical services should be documented by the company; pack size 1 x 100 ( pt vials), evacuated tubes for silica-clot activator/silicon coated made of clear latex polyethylene terphthalate with safety closure 13 x 75 mm vol. 4.0 ml. it should be us fda/ce certified. batch wise sterility/pyrrogenicity/toxicity certificate should be given. firm should provide training to technicians/nurses regularly. clinical services should be documented by the company; pack size 1 x 100 ((plain vials), blood collection needle 21 or 22 gauge with cap for evacuated tube. it should be us fda/ce certified, sterility certificate firm should provide training to technicians/nurses regularly. clinical services should be documented by the company; pack size 1 x 100 (blood collection needles 21 or 22 gauge), evacuated tube needle holder; pack size 1 x 5, test tube stand 96 holes, 13 mm diameter in two shelves fully autoclavable multi colored; pack size 1 x 1, wash bottle with delivery snore poly ethylene flexible with screw cap 500 ml; pack size 1 x 1, variable volume pipette 10 l to 100 l. fully autoclavable and ivd approve iso/ce certified

Central Government/Public Sector

CTN :39630840

24 Mar, 2025 4.80 Crore

Gorakhpur - Uttar Pradesh

Tender For supply of medical equipments for ayush university - microscope with oil immersion , westergren pipette for esr , hematocrit tube , sahli hemoglobinometer , hemocytometer , electrocardiograph , stop watch , centifuge machine with speed control , colorimeter photoelectric , ph meter electric , sphygmomanometer , stethoscope , clinical thermometer 50 , knee hammer , tuning forks , sterilizer , refrigerator , mortuary 04 bodies , dissection sets , x-ray viewing box , small , medium , porcelain , bone and brain slicing machine , hot air oven , pounding apparatus ulkhal machine , putt various types , moosha crucibles , bellow with blowing fan , spindle machine , sand apparatus , pithar machine , earth auger , distillation apparatus and extract apparatus , crucible furnace , wet grinder , balance , gas stove , hot plate , charcoal stove , field magnifier , microscope , binocular microscope , binocular microscope with oil immersion lens 20 , dropper , improved neubauer chamber , pasteur pipette , westergren pipette , westergren stand , urinometer , autoclave , cell counter hematoanalyzer , bp apparatus blood pressure apparatus , physical balance , bunsen burner , tongue depressor , weighing machine , fetal phonocardiography , phototherapy unit , infant weighing machine , patient trolley , operation table with head raising and lowering facility , pulse oximeter , biolus apparatus , anesthesia kit , blunt and sharp curette , dilatator set hanger and hawkins , mtp suction curette , scissors of various sizes , obstetric forceps , spotlight ceiling fitted bedless , chittles forceps , straight scissors tailor s scissors , curved scissors of various sizes , stitch removal scissors , dissection forceps , probes assorted sizes , small artery forceps , big artery forceps , sigmoidoscope rigid flexible , multiparameter monitor , suction machine electrical manual , bone cutter , periosteal elevator , nitrous oxide cylinder , hydraulic operation table , proctoscope with or without illumination , pre-filled syringe , emergency light , fire extinguisher , vertical bp instrument , ophthalmic operation table with head rest , torch , examination table , thermometer , measuring tape , instrument for anorectal examination , chitlen forceps , surgical blade , tuning fork , otoscope , ent kit , bull s lamp , sim s speculum , cuskos speculum , scale , pediatric bp apparatus with cuff , bone cutter set fine pointed chisel bone dissector , almeera with glass door

Central Government/Public Sector

CTN :39145973

13 Mar, 2025 NA

Bangalore - Karnataka

Tender For bid to ras custom bid for services - comprehensive annual maintenance contract of cs12 eakon cold store located at doddanekundi plant acd for a period of 3 years -summary: comprehensive annual maintenance contract includes maintenance, repair/replacement of all the components of the cold stores as follows: a) compressor, condenser unit, evaporator unit, suitable refrigerant, power supply system, control system, all safety features, operator panel, different type of sensors, interconnecting piping including drainage water pipes, cold room panels, coil and drain heaters, doors, lighting, temperature recording panels, and all other electrical, mechanical as well as electronics components of the systems & eurotherm electronic recorder.b) detailed scope of work:1 vendor should take over the cold stores for camc, in as-is-conditions., 2) preventive maintenance (pm) of the units to be carried out every month in consultation with user / maintenance dept, and detailed pm schedule to be drawn up and a copy of the pm carried out (service report) should be forwarded to purchase department duly endorsed by maintenance dept. for the reference and records. this pm should be carried out apart from periodical servicing and attending the breakdown calls. 3) servicing of the units should be carried out once in every three months, within two weeks of commencement of the quarter. this should be carried out preferably on sundays/ holidays. this servicing involves cleaning of condensers, cooling coils, filters (if any) leakage testing & rectification; and any/all other works required to ensure proper functioning of the units. a copy of the service carried out (service report) should be forwarded to purchase dept. duly endorsed by user/ maintenance dept for the reference and records. 4) the firm should monitor the temperature/ attend breakdown / preventive maintenance or any other request from user/ maintenance /quality dept. & monitor the functioning of all the cold stores. the firm should monitor and record the cold store chamber temperature every hour during shift hours and should take signature on recorded values by user, quality dept /maintenance dept. daily. the camc vendor s scope of work will be active for three shifts per day/round the clock, including sundays & holidays, i.e. all days throughout the camc period. 5) the firm should inform all the three departments user/qa/maint. in the event of malfunctioning of the equipment is noticed. they also should ensure safety of the materials stored in the event of failure of the cold stores. 6) the firm should report any abnormality, breakdown, or any bypass made immediately to all the three dept viz user, maintenance and quality dept. the equipment uptime should be greater than 95% without any interruption. 7) the firm should inform to the maintenance department in the case power failure, so that maintenance dept. can arrange for switching on the dg supply. 8) the firm should able to read the temperature in the electronic temperature recorder. 9) the firm should attend any number of breakdown complaints as and when reported by user/ maintenance dept/ quality dept during the contract period. the breakdown complaints should be attended within 8 hrs from the receipt of oral or written complaints and the system should be rectified within a day, except for the major breakdowns. 10) the firm should bring all the tools and tackles necessary including consumables for the repair / servicing. 11) the firm should hand over the cold stores in good working condition after the completion of camc, failing which necessary remedial actions will be taken to recover loses to acd-hal by deducting equivalent amount from the due amount. c) monthly checks: checking and servicing of cold stores.- (a) compressors- condensing units, solenoid valves and all gauges, drier, globe valves and all gauges, hp/lp switches, oil pressure switches ., expansion valve and mixture., refrigerant level and top-up if requir

CTN :39605083

15 Mar, 2025 6.00 Lacs

Bikaner - Rajasthan

Tender For anaerobic culture system-1. capacity: suitable for various volumes, typically ranging from small to large-scale cultures.2.. controlled atmosphere:anaerobic environment: ability to maintain oxygen levelsbelow 0.1% using a combination of gas mixtures (e.g., hydrogen, nitrogen) and catalysts (e.g., palladium).gas monitoring: continuous monitoring and control of gas concentrations (e.g., oxygen, hydrogen) within the chamber.3.temperature range: adjustable temperature control, typically ranging from ambient to 45c or higher.4. temperature uniformity: 0.5c or better throughout the chamber to ensure consistent culture conditions.5.humidity control: adjustable humidity levels to maintain optimal growth conditions for anaerobic organisms.6. chamber material:interior: stainless steel construction for durability, easy cleaning, and resistance to corrosion.exterior: powder-coated steel or equivalent for durability and aesthetics.7. access ports:multiple access ports for introducing samples, adding/removing media, and accessing cultures without disrupting the anaerobic environment.8. monitoring and alarm systems:continuous monitoring of temperature, gas levels, and humidity with alarms for deviations from set parameters.9. sterilization:autoclavable components or built-in sterilization cycle to maintain aseptic conditions.10. safety features:pressure relief valve for controlled release of excess gas.emergency backup power supply to maintain anaerobic conditions during power outages.11. user interface:touchscreen or digital interface for easy operation and monitoring of parameters.programmable settings for different culture protocols.12. data logging:? ability to log and store data related to temperature, gas levels, and other parameters for record-keeping and analysis.13. compliance:ce marked and compliant with international standards such as iso 13485 for medical devices or equivalent standards applicable to laboratory equipment.

CTN :39272613

12 Mar, 2025 NA

Jalandhar - Punjab

Tender For corrigendum : supply of red reflector dia 39 with metalic , clamp 46 x 20 , plug electrical 12 pin , bulb 24 v 6 w , hose assy brake inter vehicular , chamber air pressure brake , bulb 24 v 2 w

Central Government/Public Sector

CTN :39629265

21 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of vertical, top loading cylindrical autoclave machine for steam and pressure sterilization, steril izer chamber capacity in l (usable volume) 20 - 25 liter, sterilizer chamber type -circular, sterilizer chamb er material double walled ss 304 or higher grade steel, working temperature 121 degree celsius (with inst allation , demonstration and commencement at consignee location) make- htico/sareen surgical/indo surg ical ]

Central Government/Public Sector

CTN :39607694

27 Mar, 2025 NA

Morbi - Gujarat

Tender For instruments - adapter for ultrasound digital fetal doppler, 1 no., 4, adult colonoscope, 1 no., 8, aluminum walker adjustable, 1 no., 12, artery forcep 6" curved, 1 no., 16, autoclave vertical: model : ac123 , lab tech -should be fully automatic vertical autoclave for total destruction of all living microorganisms-pressure adjustable from 10psi to 20psi with an accuracy of +/- 1 to 3 psi, with automatic pressure control switch-outer and inner chamber made up of stainless steel-size of the inner chamber:- 50 x 75 cm (diameter x depth)-should be providing 2 carriers of stainless steel. size of the carriers should be 35-40 x 30-35 cm ( x d)-should be provided with silicon/ rubber/ neoprene gasket-lid should be stainless steel and should be fitted with pressure gauge safety valve manual exhaust valve vacuum breaker ports of calibration check-all the hinges should be of stainless steel-should be provided with stainless steel heated cover stand-drain valve at bottom for draining the water-electrically heated-micro processor controller based system to provide digital display of cycle processes like temperature, pressure-should be provided with low water level alarm and cut off-automatic pressure control switch- to cut off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level-should be fixed with chart and data recorder-iso/ ce marked -should provide test certificates, calibration certificate and traceability certificates for temperature and pressure gauges-the downtime of the equipment must not be more than 10 days annually and system must be made functional within 48 hours of breakdown and in case of such incident the period of breakdown will not be counted while calculating warranty or cmc period. if the downtime during any year is more than 10 days a penalty at the rate of 0.1percent of the cost of the equipment will be levied for each extra day of downtime.-operation manual with user demonstration video cd (with sop in guajarati), 1 no., 20, b.p. instrument digital, 1 no., 24, binocular microscope, 1 no., 28, bolster size large, 1 no., 32, bp instrument (mercury), 1 no., 36, c p chair (wooden + metal), 1 no., 40, centrifuge machine, 24 tube digital display & 5000 rpm, 1 no., 44, chital forcep 10", 1 no., 48, cold light source cable, 1 no.

Central Government / Public Sector

CTN :38339492

20 Mar, 2025 139.30 Crore

Bangalore - Karnataka

Tender For corrigendum : design, supply, installation, commissioning, training of various type of equipments for esdm (electronic system design and manufacturing) of msme training centers located at greater noida, bengaluru, puducherry and idemi mumbai on turnkey basis - decade resistance box , ct/pt calibration system , multifunction calibrator , decade capacitance box , ct analyzer , standard resistors , standard weights (el class) , pippete calibration system , low temperature bath (-80 to ambient degree temperature) , frequency counter , energy meter test system (3 position) , precision temperature stabilised resistance standard (high) , decade inductor box , precision temperature stabilised resistance standard (low) , sound level calibrator , digital power analyser , decade resistance box (4 nos.) , process calibrator , hv divider , decade mega ohm box , standard weights (e2 class) , 6 and half dmm , temperature indicator , time interval meter , temperature indicator with compensation , standard weights (f1 class) , semi-micro balance (upto 200 gms) , tachometer calibrator , standard thermocouple (type s) without compensation , sound level analyzer , standard platinum resistance temperature (prt) detector , precision balance (upto 6.1 kg) , thermo-couple calibartion furnace (300 to 1100 degree temperature) , lcr bridge , humidity measurement probe , dry block calibrator (ambient to 600 degree temperature) , anechoic chamber with radiated susceptbility and radiated emission test system , alltitude test chamber , compact emc tester , environmental chamber , digital pressure controller (dead weight pressure tester) , line impedance stablizing network , harmonics/flicker measurement test system , impulse generator , rf shielded chamber , vibration plus environmental chamber , three phase regulated variable power source , humidity generator, relative humidity , bump/shock test system , heat deflection temperature test set , vibration test system , electronic load , conducted rf immunity simulator , rohs testing lab - inductively coupled plasma optical emission spectrometer (icp-oes) , thermal shock chamber , ac dc current source , ultra precision capacitance bridge , esd simulator , horizontaland verticlal flame chamber , rohs testing lab - energy dispersive x-ray fluorescence spectrometer (edxrf) , single phase regulated variable power source , precision energy standard , rohs testing lab - gas chromatograph mass spectrometer (gc-ms) , ingress of water test system - i set , rohs testing lab - ion- chromatograph (ic) , needle flametest chamber , salt spray chamber , dust chamber , digital storage oscilloscope , defibrillator proof test set , thermostat endurance test set , flexing test apparatus , electrical safety tester , winding resistance meter , temperature recorder , radiation meter , tracking test apparatus , gas detector , cord anchorage test set , digital multimeter (handheld/desktop) , glow wire test apparatus

Rewinder Machine Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector