Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 3.5 ton u.h jib crane [yd cr 774] with electrical motors, panel boxes,panel boards, rope drum, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, electrical wirings, hooks, snatch blocks/hook blocks, wire ropes carrying the hooks and gear boxes driver cabin,fans,alarms,ladder inside the driver cabin,master controls,lights attached to the crane,current collectors , cross travel cables between the run way rails of the crane and other ferrous/non ferrous original attachements note: main power collection bus bars/angles, main ladder to climb onto the crane are not for sale and these should not be disturbed by the purchaser as these belong to railways. uc no. 123133002. makers name-greaves chitram co.total approximate weight 21600 kgs. [mild steel 21333 kgs, cast iron 200 kgs, copper 40 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 20 kgs, other non ferrous: negligible] . as is where is condition. vide scrap advice note no. 012282-25-00915 dated. 26.11.25. custodian . sse / mmw/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser.
Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 15 ton eot crane (crs-cr-711), with overall span of 14.376 mtrs, with electrical motors, panel boxes,panel boards, rope drum, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, dsl guard, electrical wirings,driver cabin,fan,alarms,ladder inside the driver cabin,master controls, wire ropes carrying the hooks, lights attached to the crane,current collectors , cross travel cables between the run way rails of the crane and other ferrous/non ferrous original attachements. note: hooks, snatch blocks/hook blocks, main power collection dsl bus bars/angles of the crane, main ladder to climb onto the crane, two long travel gear boxes and one cross travel gear box are not for sale. the two long travel gear boxes, one cross travel gear box, hooks and snatch blocks/hook blocks should be returned to the custodian by the purchaser before delivery. for handing over the gear boxes, purchaser should follow dismantling using proper tools instead of cutting in order to avoid damages. main power collection bus bars/angles and the ladder to climb on to the crane should not be disturbed as these belong to railways. uc no.120732002. makers name-vaughan crane/england.total approximate weight 11000 kgs. [mild steel 10687 kgs, cast iron 200 kgs, copper 56 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 50 kgs, other non ferrous: negligible] . as is where is condition. vide scrap advice note no. 012282-25-01419 dated. 20.02.26. custodian . sse / mmw/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser.
Tender For auction sale of depot non ferrous scrap - p.l. no. 98414010 condemned and unserviceable vrla cells /lmla / batteries, plastic covered sealed batteries, vehicle batteries, ups batteries, plastic trolley batteries , batteries of emergency lamps, hdp covered batteries, ham cells,train lighting batteries released from emergency lights, plastic covered lead acid signal batteries , plastic covered vrla batteries of telecom and signal and other similar batteries of sorts and sizes including broken, with / without inter cell connectors, wires and connection bolts. it is permitted to drain acid / water and to remove vent plugs if any. as is where is basis. segregation not permitted. cssd / goc electronic weigh bridge to be used for weighment. note: (1) special attention is invited to para 12.0 of instructions to purchasers for participating in e- auction and special terms and conditions of southern railway and general conditions relating to the auction sale of railway materials through e- auction. (2) purchaser should submit valid pcb certificate and pass book at the time of delivery.
Tender For auction sale of rolling stock - condemned coach as per below details. remarks - 1) condemned coach to be sold without excluded fittings as per crse/secr/bsp's letter no. mech/hq /010/010/warranty dated 23/09/2021; complete trolley along with complete wheel sets with all brake rigging fittings and bmbc, centre pivot pin, dv complete, bronze piece and electrical items i.e. alternator, pulley, fan, tube lights, rr box, battery to be recovered from purchaser. 2) coach to be sold on ""as is where is"" basis & delivered in numbers 3) after disposal of all cut off materials, cutting area to be cleaned by the purchaser. 4) left over cut pieces copper & aluminum wire, switches and other small electrical fittings are to be handed over to purchaser. 5) left over cut pieces, copper, aluminum or stainless steel strips on snack table, lp sheet panel or in else where attached on various places of coach fitting is to be handed over to purchaser.
Tender For auction sale of rolling stock - mild steel scrap cut up parts of cond. wagons to be sold without bogie and excluded fittings as per crse/ bsp letter no. mech. /hq/ 003/007 /4016 dt. 12.11.2018 [excluded fittings-coupler body, knuckle, knuckle pin, draft gear, yoke ,bogie end pull rod, brake cylinder complete with piston rod and suspension bracket, yoke pin,ctrb, wheel sets and roller bearing, bogies, icf trolley bvzi, distributor valve.] & front follower of draft gear vide pcme/bsp's letter mech/hq/010/010/warranty dtd. 09.06.2020. remark: 1. wagons may be grounded for clearing of track. 2.wagon component must be cutup before lifting by the purchaser, so that component can not be re-used. 3. weight is as per the challan provided by the stock holder and it is for reference only. 4.in bvzc wagon lb springs to be cut marked before delivery to ensure non-recycling of material. 5. to be sold on "as is where is basis" 6. cbc components to be handed over sepretarely in placemeal.
Tender For auction sale of depot ferrous scrap - lot no.m.cs-1.exmp.d.04.2026-27.02 description- scrap steel casting (drag boxes centers castings streatcher casting, pivot cbc components knuckles, axle boxes & buffer cases, rubbing blocks etc). our offer :- cs trolley as in the lot. materials are laying in one place at "d-1" sector. before bidding bidders are requested to inspect the lot. cutting may be allowed. loading will be done by purchaser's own arrangement.
Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.
Tender For auction sale of depot ferrous scrap - p.l. no. 98057054. scrap melting gr-d consisting of cutting sol bar, fall plate, head stock, cutting outside panel, celling fan down rod, wagon door & body cutting part, driver seat assly. trough floor, electrode holder, cab window assly. psychostyle machine, trolley, plate cutting, angle cutting, iron axle with pipe, cover of tail light head light flasher etc. tie bar fencing, pipe cutting, structure cutting, cut pieces of rod, damage emu door, lubricating felt assembly frame, mvmt,tmb,emu, mvsi impeller, mvsi duct, air duct, fan chamber, electrical pillar box, compression spring of bk cylinder, inter/after cooler tube type, lid of grease drums, partition frame, cattle guard, ms base, l.t. panel box ferrous, , tap changer, expanded metal, vsb packing, bs door, iron window, ms rod , fire extinguisher, gate, nut , bolt, washer, wick felt carriers, pin, angle frame with or without net, r.s. joint, ms iron plate, angle, door shutter, cutting chain, net box, fencing wire and such materials fit for melting gr-d, except p-way materials such as rail, fish plate and non ferrous etc. note-some items are attached with negligible quantity of ss. qty-205mt.location-south of link road, east of j. t. road. condition-two day¿s advance cutting is allowed for loading purpose only.
Tender For corrigendum : auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as mg/bg carriage frames, coach battery box ,tension spring, seat frames of different sizes, berth frames, wheel stand, tie bar gate, ms gate, battery box, empty electrical box, ms window, gi re mast, window grills, ms grills, ms stands, rolling shutters and partition frames of coaches , tie bar gates, tmt bar, wheel stand, suspension rods , foot step, ms boxes, luggage rack, ms pipes, ms cylinder, cut parts of coaches, zinc sheet, transformer body, coach sheets, point machine cover, iron rods, trolley, ms wire, bolt & nut and other nmg coach cutting scrap items coming under ms items with/without ss, plastic, electrical and other nfs attachments on as is where is condition available under the custody of cdms 08ward ap note: pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. cutting permitted upto loadable size ( loc: bin no. 132 at scrap yard)