Latest rifle chain Tenders | Government rifle chain Tenders

State Government

CTN :39963111

28 Apr, 2025 14.96 Lacs

Barkot - Uttarakhand

Tender For supply of t and p material for use in line work under deposit head in the area of edd barkot - electrical items :, earthing rod ms 20x2500mm-d, 11 kv hand gloves, safety helmet, allen key kit, conductor/belt cutter 42 inch, screw driver 8 inch, screw driver 14 inch, high insulated plier, screw driver with phase tester, chain pully 5 ton, crimping machine up to 400 mm al lugs, rain suit, led torch with electric charging, gum boot, reflector jacket with upcl monogram, chain saw upto 18 ft, d-spanner set, analog megger 5000 v, ring spanner set, (max puller)turfer tractel 3 ton, aluminium foldable telescopic ladder, earth chain (brass), tong tester digital

Corporations And Associations And Others

CTN :39983908

16 Apr, 2025 1.58 Lacs

Bahadurgarh - Haryana

Tender For work for supply and installation of playing and open gym equipment in 2 nos. parks at near h. no.273 sector-10 bahadurgarh and all other works contingent thereto with one year defect liability period free of cost - app. item leg press + surf boardmain round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item providing and fixing chain swing of size 10 long x 9 high (above ground) frame is made of m.s. pipe 2" b class which stay with m.s. pipe 1" b class frame is connected with m.s. road 25 mm dia shaft having fabricated ball bearing no. 3204 shaft, further having 2 no. seating belt type seat welded with 8mm thick m.s. complete with painting and fixed in cement concrete block of size 12" x 12" x 15" into 4 legs in mixing of ratio 1:2:4. complete in all respect of entire satisfaction of engineer-in-charge., app. item providing and fixing of slide 12 long x 16" wide x 5 high (above ground) slide is made of s.s. sheet 18 swg mounted on m.s. angle 40 x 40 x 4 mm slide 2 no vertical support of m.s. pipe 1" b class ladder having climbing steps of pipe 1/2 "b class complete with painting and to be fixed in cc blocks 12" x12" x15" in to 4 legs of mix in ratio 1:2:4.., app. item providing and fixing of setter sea -saw frame made of 2" dia ms pipe, 5" long and 1-6 height of ground level with 4 nos of sea-saw plunks with 1 " ms pipe, 8 long sheet made with 16 gauge painted with 1st quality paint and fixing with concrete block 1:2:4 ratio., app. item supply and installation of garden bench chair type garden bench with l-shaped sides made of reinforced concrete (m30), thickness 100 mm, overall height 1000 mm, base width 620 mm. back and seat shall consist of 5 nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. seating height of the bench shall be 450 mm. the bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. all materials required to be as per bis specifications.

CTN :39983579

28 Apr, 2025 5.99 Lacs

Rupnagar - Punjab

Tender For procurement of different types of spares for wet ash handling system of stage ii and iii at ggsstp ropar. - lantern ring for clinker grinder, material gun metal as per sketch a ., wear ring for clinker grinder, material ss-304 as per sketch b ., bearing housing expansion type for clinker grinder of ci grade 220 is-210 as per sketch c , nozzle tip of material ss 410, hardness 525 bhn along with nozzle plate of ms as per is 2062 for stage iii and as per sketch d , intermediate wear piece for stage-iii hydro ejector material alloy c.i nickle min 4.5% as per is 4771 type1 (a) hardness min 500 bhn as per sketch e., 200 mm inlet piece for hydro ejector of bottom ash hopper of stage-ii & iii. material alloy c.i as per is 4771,type 1(a),nickle min.4. 5%, hardness min. 500 bhn as per sketch f , nozzle tip of material ss 410, hardness 525 bhn along with nozzle plate of ms as per is 2062 for stage ii and as per sketch g , jointless shaft sleeve for clinker grinder as per sketch h.material ss-304, alloy steel 1 x1 roller type simplex chain of pitch 1 , width 1 (min) between inner plate, roller dia. =25.4 mm, no. of rollers = 98 length= 12 3 for clinker grinder of stage- ii& iii., adaptor for power cylinder, material - gun metal as per sketch i, spherical roller bearing 22317 e1k (brass cage) with sleeve h2317, lock nut km17, lock washer mb17, jointless shaft sleeve for asp d-85 & d-85 d as per sketch j. material ss-304, jointless shaft sleeve for asp cd-135 as per sketch k. material ss-304

CTN :39967222

22 Apr, 2025 14.85 Lacs

Multi City - Karnataka

Tender For supply of materials for the construction of nrlm building under mgnregs scheme" - ppura mason class 1, eletrification, gst, ppura cp brass waste 32 mm of standard pattern, ppura brass stop cock, ppura lead or pvc connection pipe 32mm dia (for wash basin), ppura licenced plumber with tools, ppura pvc pipe of 4kg cum,63 mm, ppura pvc pipe of 4kg cum,110 mm, ppura polyenthylene water storage tank of specified capacity l, ppura labour charges for lifting and placing in position and making connection at 7%, ppura handling loading and unloading 3% on material, ppura water proofing cement paint, ppura add brush, putty, sand paper at 2% on cost of paint, ppura plastic emulsion paint, ppura add brush, putty, sand paper, roller at 5% on cost of paint, ppura enamel paint, ppura transportation charges of materials beyond 5 km10%, ppura cost of 6.5mm m.s. coil, ppura fabrication charges., ppura mason class 2, ppura rcc cap 1000 mm dia, 100 mm thick, ppura corpenter, ppura corpenter avrage, ppura chrominum plated screws, ppura 5.50 mm thick plain glass, ppura fabricator, ppura add hom of welding and grinding machine 2% on material, ppura formwork, centering & scaffolding for plastering & painting of ceiling - 25%, ppura vitrified tiles 600x600 mm, ppura high bond tile adhesive for vitrified tiles, ppura adhesive for joints, ppura machine polished granite stone slabs 20 mm, ppura stone dresser (with tools), ppura ceramic tiles of size 30 x 30 cms, ppura white cement, ppura orissa pattern of size 580x440mm with integral type foot rests, ppura 100mm s or p trap, ppura p.v.c. flushing cistern 10 lts low level with fitting, ppura c.i. / m.s. brackets for flushing cistern, ppura g.i. 32mm dia telescopic flush pipes with fittings specials, ppura m.s. holder bat clamp 32mm, ppura g.i. overflow pipe 20mm dia, ppura special for overflow pipe, ppura mosquito proof coupling 25mm, ppura add white lead paint, gasket, cement, sand for making good the wall and floor, ppura white vitreous china clay flat back wash basin size 630x450mm, ppura copper plated brass piller tap 15mm, ppura cp brass chain with plug, ppura binding wire, ppura m.s rods, ppura ms flat, ppura fitter class i, ppura welder grade i, ppura add hom of welding and grinding machine 4% on material, ppura ready mix primer paint (ready mix red lead paint), ppura add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, ppura painter class i, ppura add providing and removing scaffolding at 3% on labour, ppura add handling , loading and unloading at 2% on material, ppura enamel metal paint, ppura add brush at 1% on cost of paint, ppura mathi/nandi wood planks for panels 25 mm thick, ppura add cutting and other wastage 5%, ppura hom of machinaries for planing, ppura mathi/nandi wood scantling, ppura unit cost as per the specification, ppura powder coated 60-70 micron, ppura nylon rollers, ppura rubber beading for shutters beading, ppura pvc beading, ppura alluminium tower bolt - 20 cm, ppura alluminium handles - 15 mm, ppura cleat angles, ppura coarse sand (zone iii), ppura portland cement, ppura mixer (concrete) - 1 cum capacity, ppura add watering charges at 1 % on material, ppura add sundries charges at 1 % on material, ppura over head & other miscellaneous charges, ppura size stone 20 x 20 x 25 cms, ppura bond stone 20 x 20 x 45 cm, ppura boulders, ppura mixer (concrete small used in culvert), ppura mason class i (with tools), ppura mason class ii (with tools), ppura stone chistler class ii, ppura plasticizer / super plasticizer, ppura hom of vibrator 0.71 days, ppura add sundries charges at 1 % on labour, ppura add watering charges at 1 % on labour, ppura formwork, centering & scaffolding for beams & lintels of building - 60%, ppura formwork, centering & scaffolding for roof (straight & arched) - 50%, ppura burnt bricks of class designation 35 modular, ppura casurina poles 100 - 150 mm, ppura add handling , loading and unloading at 1% on material,

CTN :39914703

13 Apr, 2025 5.23 Lacs

Multi City - Karnataka

Tender For supply meterials of sanjeevini shed at katuvalli - katgp silver oak or equivalent planks 38 mm thick, katgp jungle wood runners and planks, boukatgp lders, katgp bond stone 20 x 20 x 45 cm, katgp size stone 20 x 20 x 25 cms, katgpplasticizer / super plasticizer, katgp portland cement, katgp coarse sand (zone iii), katgp broken stone aggregate 12 mm to 10 mm size, katgp broken stone aggregate 20 mm size, katgp broken stone aggregate 40 mm size, katgp water proofing cement paint, katgp distemper primer, katgp whitening, katgp dry distemper, katgp lime, katgp ready mix primer paint (ready mix red lead paint), katgp add, katgp z section, katgp reeded glass 2 mm thick, katgp tw beading for fixing glass, katgp stays, katgp handles, katgp ms clamps, katgp mullion section, katgp t section, katgp honnewood planks for panels 20 mm thick, katgp honne wood, katgp unit cost as per the specification, katgp hom of machinaries for planing, katgp mathi/nandi wood planks for panels 25 mm thick, katgp binding wire, katgp tmt bars fe 500, katgp casurina poles 75 - 100 mm dia, katgp burnt bricks class 35 (non modular), katgp casurina poles 100 - 150 mm, katgp fabrication charges., katgp cost of 6.5mm m.s. coil, katgp bib cock 20mm nominal bore, katgp polythylene pipes high density 32mm external dia, katgp pvc pipe of 75 mm, katgp pvc pipe 63 mm, katgp pvc pipe 110 mm, katgp polyenthylene water storage tank of specified capacity l, katgp lead or pvc connection pipe 32mm dia (for wash basin), katgp c.i. / m.s. brackets for flushing cistern, katgp brass stop cock, katgp cp brass waste 32 mm of standard pattern, katgp cp brass chain with plug, katgp copper plated brass piller tap 15mm, katgp white vitreous china clay flat back wash basin size 550x400mm, katgp 100mm sp trap, katgp indian type water closet of size 580 mm of specified make with footrests, katgp border tiles 30 x 10 cms, katgp glazed tiles 300x450, katgp white cement, katgp ceramic tiles 30 x 30 cms, katgp vitrified tiles 600x600 mm, katgp enamel paint, katgp hinges 5 heavy duty, katgp solid concrete block

State Government

CTN :39961275

21 Apr, 2025 1.50 Crore

Vidisha - Madhya Pradesh

Tender For fencing material - rcc fencing poles height 2.0 mtype- straightlength- 2.00mdimensions - bottom 10x10 cm square, top 8x8 cm square.cement concrete mix- cement, sand and metal ration 1:2:4, with 12.5 nominal size coarse aggregate, sand used should be free from clay and salt. concrete mix shall be confirming to grade m-15 of is:456:2000.reinforcement- 4 round vertical bars of 6 mm diameter. 11 no of stirrups of 6 mm diameter round ms bars 20 cm centre to centre.hooks - 5 no. bottom hook should ve provided 60 mm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm. fourth hook at 150 cm, top and fifth hook at 195cm from bottom. manufacturing - in order to endure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators, surface should be uniform and free voids, the concrete cover over the reinforcement should not be less than 1.5 cm., galvanised steel barbed wireline wire- galvanised steel wire of 2.5 mm diameter.point wire- galvanised steel wire of 2.5 mm diameter.barbs - distance between two boards 75 mm, the barbs shall have four points and shall be formed by twisting two point wires each two turns, tightly around both the line wires making altogether four complete turns. standard - conforming to is-278-2009, galvanised steel chain link fencemesh wire- galvanised steel wire of 3.15 mm diameter. fabric size- 100x100 mmheight- 150 cmline wire- 2 numbers of line wires of 4.00 mm diameter.standard- conforming to is-2721-2003, with up to date amendments.

Co-operative

CTN :39930272

17 Apr, 2025 NA

Najibabad - Uttar Pradesh

Tender For 3272/supply of hardware items - en-8 round of different size, m.s round of different size, m.s. square of different size, m.s plain washer of different size, spring washer flat saction of different size, s.s. washer of different size., spring washer bbbb/ssss of different size, alluminium rivit of different size, rubber joint black sheet size 1/8", .do . but size 1/16", .do . but size 1/4", hexa blade (miranda) size 1/2" x 12", alluminium plate 8 mm, .do . but 10 mm size, klipko make hose clamp of different size, spring steel flat 5 x 35 mm, split pin champion make of different size, valve grinding paste (emery paste) c/u make rough, valve grinding paste(emery paste) c/u make fine, emery tape carborandum make (rough) size 1 , do but carborandum make size 1 , do but carborandum make size 2", emery cloth carborandum make no.50, do but carborandum make no. 80, do but carborandum make no. 100, red lead diwaldi make, white lead shakura make, m.seal (mahindra & mahindra make), holdite compound in 500 gram, rustoline in 500 gram, shallack compound ellofic/pidilite, araldite (1.8 kg), graphite powder, thread seal tape champion make size (taflon tap), lead wire size 3mm thick, lead wire size 0.5mm thick, lead seal, sealing wire, lead, locktite in 50 ml, percian blue enamel paint tube in 20ml, namda (wollen flat) size 30mm x 6 x6 , namda (wollen flat) size 1/2"x1x2, brasso ( reckitt & colman make)500 ml, brass shim size 14 x 48 x 5 thou, brass shim size 14 x 48 x 8 thou, brass shim size 14 x 48 x 10 thou, brass shim size 14 x 48 x 15 thou, brass rod different sizes, brass brazing rod size 1/8 & 1/4", brass connector with nut size 3/8 , brass ferrul size 3/8 , brass ferrul size 1/8 , brass ferrul size 1/4 , brass ferrul size 5 mm, brass connector size , brass connector with nut and brass ferrule size 3/8 , brass connector with nut and brass ferrule size , brass connector with reducer size 3/8 x , brass nut 10mm outside thread, s.s. plate 316 grade in all size, s.s. plate 202 grade in all size, s.s. rod different sizes in 304 grade, stainless steel piano wire roll, circlip in different size, steel wire rope 18mm (construction 6/19) tensile strength 1770n / mm usha martin make with test certificate with hampcore, good year make flat belt all sizes, duplex/roller duplex chain diomand make all sizes, advani make super bond s.s. electrode size 2.5mm, advani make super bond s.s. electrode size 3.2mm, advani make super bond s. electrode size 2.5 mm, advani make super bond s. electrode size 3.2 mm, d & h make super bond s.s. electrode size 2.5 mm (3.5kgpkt), d & h make super bond s.s. electrode size 3.15mm (4.5kgpkt), sil bronze welding rod size 1/16 , copper rod different sizes, annabond tube in 100 gram no. 666, annabond retainer for bearing no. 412, gates make double wire braided hyd. hose pipe for unloader size 1 x 2.7 mtr long., painting brush 25 mm, painting brush 35 mm, painting brush 50 mm, painting brush 70 mm, painting brush 100 mm, painting brush 150 mm, steel wire brush 3 x 6 , plumber block smr make in different size, aligator type belt fastne steel belt locking size no.35, angle grinder hitachi make 4 , copper pipe / tube any size, lrb pad (glass wool) 1640x1220x50mm (with wirenetting), m.s.connector forged 1/2 x 3/4 , tefflon rod 32 mm (1 "x1 ft), cs glove valve bhel male socket weld class 1500 , cs glove valve bhel male socket weld class 1500 size 1 , s.s. strip 6 x 100 mm grade 304, hexa blade frame 12 complete, gear coupling gc-102, c.i.pulley (pilot bore h.d.) 18 , flexible wirebraided steam hose pipe both side bsp fitting 1 x 15 & 1 x 18 , flexible wirebraided steam hose pipe both side bsp fitting size 1 x 12 , m.s.flat different sizes, g.m. flat of different sizes, s.s. needle valve hd , c.i.pulley heavy duty 16 x 3 groove section b , vacuum hose pipe 2 x 18 , wire braided steam hose rubber hose pipe id , tube expender af-72.2 power master make, m.s. stud full thread with double nut 12x125mm, klinger

CTN :39901115

23 Apr, 2025 2.00 Crore

Delhi - Delhi

Tender For procurement of equipment, instruments, machinery, tools etc. related to laboratories and workshops of electronics & telecommunication engg., engineering physics, engineering mechanics of mirik government polytechnic, mirik, dist - "spherometer , (screw pitch 0.05 mm and lc 0.005 mm)", "concave mirror , (focal length 20 cm)", "convex mirror, (focal length 20 cm)", "concave surface , (focal length 20 cm diameter 50 mm)", "hook's law apparatus , (consisting of 30 cm long mirror scale,, spring, slotted weights with hanger and, pointer, complete on heavy tripod stand)", "mercury , (distilled liquid mercury, grade std.-biotech grade)", "flywheel apparatus , (thickness: 4.4 cm diameter :20 cm)", cantilever (length 100 cm, hook at one end, c clamp), light weight hanger (metal slotted weight mechanics physics experiment equipment set with hook with weight of each mass of the order of 50gm or 100 gm), "inverse square law apparatus (optical bench, photocell housed with, red and black sockets, lamp house with lamps, dc microammeter)", stopwatch (digital stopwatch with ms count), high resistance box (resistance box plug with 1 to 10 k ohm resistance), "winch crab single purchase with weight, [experiment set up winch crab single purchase- fitted with heavy cast iron wall brackets the grooved wheel is of 25 cm diameter and gears are machine cut. string, weight box with pan. ]", "winch crab double purchase without weight, [experiment set up winch crab single purchase- fitted with heavy cast iron wall brackets the grooved wheel is of 25 cm diameter and gears are machine cut. ]", "worm and worm wheel single without weight , [experiment set up consisting of machine cut worm gear of 25 cm diameter, carrying a metal drum on 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm, complete with effort pulley, string with pan.]", "worm and worm wheel double without weight , [experiment set up consisting of machine cut worm gear of 25 cm diameter, carrying a metal drum on 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm, complete with effort pulley, string with pan.]", "wheel & axle simple without weight, [standard setup for lab.]", "simple screw jack with weight, [experiment set up screw jack ( weights)all metallic construction accurately machine cut screw with a pitch of 5 mm carrying a double fanged turn table of about 20 cm diameter. fitted on a heavy cast iron base and complete with two adjustable pulleys, cord and hook. weights are included.]", ", combined inclined plane & friction slide apparatus iron base & with weight, [standard setup for lab.]", "parallel forces apparatus, [experiment set up simple supported best type supported at its end. for verification of condition of equilibrium of parallel forces, law of lever & forces on beam etc. consisting of two compression thrust type 10 kg tubular spring balances fixed on wooden polished board, a wooden beam with steel back plate. complete with two strups, hooks & two 10kg weights. ]", "to verify lamis theorem , [gravesand apparatusboard: wooden with metal base, pulley: z-pullies (2 nos), with adjustable distance, weight set: 5x50 g (3 sets). ]", "simple jib crane apparatus iron stand with weight, [experiment set up with consisting of a tubular compression balance, pivoted about an axis fitted to the base. the tie chain has an adjustable angle bracket and fitted with a 10kg extension balance. completion wooden base with 1.2 meter jib. with weights. ]", "mini drafter, t square, protractor, set squares, compass, divider, [made out of wood. to be used in chalk board]", "model of geometric constriction (solid cube, solid primed, cylinder, cone, hexagon, tetrahedron ), [made out of wood. to be used in chalk board]", "amplitude modulation and demodulation trainer kit, [message signal:100 hz to 2.8 khz, carrier signal 28 khz to 108 khz,modulation : balanced modulator, amplifier : op amp based, demodulation : diode detector & lpf(6th order

State Government

CTN :39887512

15 Apr, 2025 40.00 Lacs

Karunagappally - Kerala

Tender For supply of mechanical spares - kerafed oil complex karunagappally, sprocket, sprocket, sprocket, sprocket, sprocket, chains, gear, gear, gear, gear, gear box, gear box, gear box, shaft, shaft, cage bar, cage bar, spacer, spacer, spacer, ms bar, rod, blade, elevator bucket, conveyor rail, conveyor rail, worm set first chamber, collar, forward worm, forward worm, forward worm, forward taper worm, worm set second chamber, collar ( taper), forward worm, collar ( taper), forward worm, reverse worm, forward worm, collar, taper collar, collar, collar, cone bush, cone, cone, conveyor, bolt, clambing bar, cente ring, ring, conveyor chain, side bar, kerafed coconut complex naduvannur, first stage worms, forward worm, forward worm, forward worm, forward worm, forward worm, forward worm, forward worm(tapper), first stage collars, collar, collar, collar, tapper collar, tapper collar, tapper collar, tapper collar, bush, bush, cone 8 1/2" length, flywheel shaft(first stage), expeller main shaft, second stage worms, quill worm, forward worm, forward worm * 50% stepped id 90,85, forward worm, forward worm, second stage collars, collar, collar, collar, tapper collar stepped id 90,85, collar, tapper collar, cone bush, flywheel shaft(second stage), expeller main shaft - second stage, gears for mark v expellers, bevel pinion, bevel pinion, bevel gear 42 teeth, 12 teeth shaft pinion, main gear(helical), goyam expeller worms, forward worm, forward worm, forward worm, forward worm, forward worm, forward worm, bush, cone, tapper collar, tapper collar, tapper collar, tapper collar, plain collar, plain collar, plain collar, cage bars (taper), cage bars (straight), cage bars (straight), elevator bucket with out holes, elevator bucket with out holes, elevator bucket with out holes, elevator bucket with out holes, cutter blade (hammer mill), redler conveyor link, redler conveyor link, bucket elevator chain (2, 7, 18), bucket elevator chain (10, 15 & 22), sieve for hammer mill machine, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket

CTN :39892192

16 Apr, 2025 2.38 Crore

Peddapalli - Telangana

Tender For providing of chain link fencing with ms angular posts around ca land areas at mocp rg-1 area, godavarikhani, peddapalli, dist., telangana state.

Rifle Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

State Government

Co-operative

State Government