Latest road mix concrete Tenders | Government road mix concrete Tenders

State Government

CTN :39178463

07 Feb, 2025 1.10 Lacs

Mandi - Himachal Pradesh

Tender For r.r. damages near district industry office building at tarna distt. mandi (h.p. - providing and fixing 110mm (one hundred ten millimetre) diametre single socketed unplasticised rigid pvc rain water pipes on wall face conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of engineer-in-charge., providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of engineer-in-charge., bend 87.5 (eighty seven point five degree)110mm (one hundred ten millimetre) bend, providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of engineer-in-charge., socket 110mm (one hundred ten millimetre), constructing brick masonry manhole in cement mortar 1:4 (one cement : four coarse sand ) with r.c.c. top slab with 1:1.5:3 mix (one cement : one and half coarse sand : three graded, crushed stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded, crushed stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded, crushed stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design. inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including c.i. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteent kilogram) with sewer bricks conforming to is:4885 complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of engineer-in-charge.

Central Government/Public Sector

CTN :39171274

19 Feb, 2025 NA

Lucknow - Uttar Pradesh

Tender For provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

State Government

CTN :39160104

18 Feb, 2025 6.43 Lacs

Parganas - West Bengal

Tender For construction of concrete road including masonry box drain at jotinagar, block-b, 10 no. goli from h/o kamalesh kundu to h/o shymal mondal within ward no.21 under bidhannagar municipal corporation. (councillor fund)

State Government

CTN :39160525

18 Feb, 2025 3.93 Lacs

Parganas - West Bengal

Tender For construction of concrete road including masonry box drain at arabindapally from h/o pankaj adhikari to h/o sanjoy roy under ward no.21 under bidhannagar municipal corporation. (under ssm scheme) (3rd call)

State Government

CTN :39160548

18 Feb, 2025 5.19 Lacs

Parganas - West Bengal

Tender For construction of concrete road including masonry box drain at adarshapally from h/o biraj roy to h/o goswami bari via h/o sanat saha within ward no.21 under bidhannagar municipal corporation. (councillor fund)

State Government

CTN :39160558

18 Feb, 2025 7.06 Lacs

Parganas - West Bengal

Tender For construction of concrete road including masonry box drain at jotinagar, block-b, 3 no. goli from h/o bidhan baral to h/o dilip halder within ward no.21 under bidhannagar municipal corporation. (councillor fund)

State Government

CTN :39160578

18 Feb, 2025 10.39 Lacs

Parganas - West Bengal

Tender For construction of concrete road including masonry box drain at jotinagar from h/o minati biswas to h/o swapan chakraborty within ward no.21 under bidhannagar municipal corporation. (councillor fund)

CTN :39149552

07 Feb, 2025 3.44 Lacs

Idukki - Kerala

Tender For shg work shed ward 11 - materials, stone for masonry work, through and bond stone size 24 x24 x 39cm, portland cement (53 grade), coarse sand (zone iii), stone aggregate(single size):40mm nominal size, stone aggregate(single size):20mm nominal size, stone aggregate(single size):10mm nominal size, hire charges of concrete mixer0.25 to 0.40 cum with hopper, vibratot (needle type 40mm), solid blocks of size 30x20x20cm, mild steel round bars for reinforcement, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m(2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), fine sand (zone iv), stone aggregate(single size):06mm nominal size, anjili wood scantls, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameledmild steel screws 40 mm, bright finished or black enameledmild steel screws 20 mm, vitreous china orrisa type w.c. pan size 580mm

CTN :39149282

10 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For mgnregs material supply 2024-2025 - stone aggregate(single size) 40 mm nominal size, stone aggregate (single size) 10 mm nominal size, stone aggregate(single size) 20 mm nominal size, coarse sand (zone iii), portland cement, fine sand (zone iv), quarry waste, royalty for good earth, stone for masonry work, average rate of mild steel round bars for reinforcements - carriage of steel 1.05/10 = 0.105t/ twisted steel/deformed bars, twisted steel/deformed bars, galvanised steel corrugated sheets, mangalore tiles 20 mm thcik, mangalore ridge tiles 20 mm thick, precoated galvanised steel plain ridges, mild steel round bar above 12 mm dia, interlocking c.c. paver block (80 mm thick, m-30) - bedding layer - 50mm thick , black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., ceramic glazed tiles ist quality 300 x 300 mm in all shades designs except white, ivory, fume red brown etc., solid blocks of size 30x20x15cm, stone aggregate(single size): 06 mm nominal size, pvc pipe 15 mm outer dia. 12kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2 - (adding 15% for fittings and wastage), pvc pipe 20 mm outer dia 10 kfg/cm2 - (adding 15% for fittings wastage), pvc pipe 25 mm outer dia . 12 kgf/cm2 - (adding 15% for fittings and wastage), pvc pipe 25 mm outer dia. 10kgf cm2 - (adding 15% for fittings and wastage), pvc pipe 32 mm outer dia. 10kgf/cm2 - add 15% for fittings and wastage etc, pvc pipe 32 mm outer dia 6kgf/cm2 - add 15% fitting and wastage etc on (a), pvc pipe 40 mm outer dia. 10kgf/cm2 - add 15% for fitting and wastage etc on (a), pvc pipe 50 mm outer dia.6kgf/cm2 - (15% added for fittings and wastage etc), pvc pipe 15 mm outer dia. 12kgf/cm2 - (adding 30% for fittings and wastage), pvc pipe 15 mm outer dia 10kgf/cm2 - (adding 30% for fittings and wastage), pvc pipe 20 mm outer dia 12 kgf/cm2 - (adding 30% for fittings wastage), pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc), pvc pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc), pvc elbow 63 mm dia, pvc bend 63 mm dia, pvc elbow 75 mm dia, pvc tee 63x63x63 mm dia, pvc end cap 63 mm dia, pvc socket/coupling 63 mm dia, pvc reducer 63x50 mm dia, pvc door elbow 63 mm dia, pvc door tee 63 x63x63mm dia, pvc vent cowl 63 mm dia, empty cement bag - (country twine,stitching charge and needle), welding by electric plant - for cutting assembling & eretion, mild steel tubes hot finished welded type, galvinised wire mesh of average width of aperture 1:4 and nominal dia. of wire 0.63 mm, wire nails, pvc corrugated roofing sheets, pvc plain roofing sheets, 200 mm aluminium aldrop, iron hooks & eyes 100 mm, common burnt clay f.p.s. (non modular) bricks class designation 7.50, modular common burnt clay bricks of class designation 7.50, vitrified floor tile 60x60 cm, vitrified floor tile 50x50 cm, mild steel tubes hot finished welded type, galvanised steel corrugated sheets, precoated aluminium trafford sheet 0.45 mm thick, gi trafford profile sheet 0.35mm thick, gi chicken mesh ( 24 guage 12.5x12.5mm), precoated galvanised iron profile sheet 0.50 mm tct, green net 75% shade, twisted steel/deformed bars, g.i. plain washer thick, bitumen washer, galvanised steel j or l hooks 8 mm dia, citizen information board( public), citizen information board( private), sundries, binding wire, boots, hand gloves, finger gloves, hammer, pots, tarpaulin, chatti, mammaty, showel, lever, kotta, pick axe, mild steel round bar above 12 mm dia, centering & shuttering , vibrator (needle type 40mm), hire charges of concrete mixer 0.25 to 0.40 mm with hopper, green hose, pump set, g i sheet, wheel barrow, plastic drum, hire charge of 5 hp engine and pump set - materials, hire charge of 10 hp engin

CTN :39150425

12 Feb, 2025 1.33 Crore

Palakkad - Kerala

Tender For mahatma gandhi nregs- supply of materials to various work sites in sholayoor grama panchayat 2024-2025 - 0983 : fine sand (zone iv), 0982: course sand (zone iii), 0295: stone aggregate (single size): 20mm nominal size, 0293: stone aggregate (single size): 40mm nominal size, 0297: stone aggregate (single size):10mm nominal size, 0367: portland cement, 1.008: stone for masonry work, 1005: twisted steel bar, 7319: wall form panel, mr94: quarry waste, 0002: hire charge of concrete mixer, 0012: vibrator, mr186: precoated aluminium trafford sheet 0.45 mm, 0298: stone aggregate (single size):10mm nominal size, 1208: bitumen washer, 1209: g.i plain washer thick, 1219: wire nails, mr113: galvanised wire mesh, 4009: mild steel tubes hot finished welded type, 1215: welding by electric plant, 4202: red oxide zinc chromate primer, 0833: synthetic enamel paint in black or chocolate shade, 2406: float glass sheet of nominal thick 4mm, mr4: solid block of size 30x20x15cm, 0775 : deharadun white lime, 808: water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, 0815: dry distemper, 1154: stone for size 24x24x39cm, 0595 : bright finished or black enameled mild steel butt hinges 100 x 58x1.90mm, 0597 : bright finished or black enameled mild steel butt hinges 50 x 37 x1.50mm, 0640 : bright finished or black enameled mild steel screws-20 mm, 7800: ceramic glassed tiles first quality minimum thickness 5mm in all colours and designs, 7801: ceramic glassed tiles first quality 300 x300 mm in all colours and designs, 7103 : stainless steel kitchen sink without drain board 470 x 420mm boul depth 178mm, 1309 : ci braket for wash basin and sink, 1547 : gi pipe 25mm dia, 1885 : 15mm cp brass tap, mr80 : pvc bend 110mm dia, mr10 : anjili woods scantls, mr54 : pvc pipe 110mm outer dia 6kgf/cm2, pvc elbow 110mm dia

Road Mix Concrete Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government