Latest road stud Tenders | Government road stud Tenders

State Government

CTN :39886559

07 Apr, 2025 90.31 Lacs

Noida - Uttar Pradesh

Tender For provide & fixing of road safety item on road between sector-62 and 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar

CTN :39572008

03 Apr, 2025 NA

Jaisalmer - Rajasthan

Tender For tender for supply of led wall mounted decorative light fitting with provision two bulb , led wall mounted decorative light fitting with provision one bulb , bathroom glass shelf 2 feet long , corner glass shelf 300mm , corner glass shelf 500x125mm , kitec female tee connector 12.7 mm , kitec elbow connector 12.7 mm , kitec connector 12.7 mm , kitec pipe 12.7 mm , mild steel wire nails 1.4 mm , ss bow handle 100mm , ss bow handle 125mm , peg set of 6 , plate rack stainless steel 1245mmx915mmx405mm , toilet paper holder , white cement , stainless steel 304 grade finished handles 200 mm , stainless steel 304 grade finished butt hinges 125mm , stainless steel 304 grade finished tower bolt 200mm long , stainless steel 304 grade finished sliding door bolt aldrop 16 x 300mm , stainless steel 304 grade finished floor door stooper , screw 35 x 8 mm , self screw 32 x 8 mm , 3mm thick fibre-reinforced plastic sheet of transparent colour , ply wood 8x4x6 mm , edge bending tape 1 mm thick for 18 mm hdhmr board , edge bending tape 1 mm thick for 12 mm hdhmr board , sheet glass 3mm of 4 feet x 3 feet , glass putty , pvc pipe 110mm , pvc bend 110mm , pvc branch piece single y 110mm , pvc junction single t 110mm with eye lid , pvc reducer 110mm , pvc vent cowl 110mm , solvent of 100 ml , araldite epoxy adhesive resin and hardner , knob for dressing table cupboard , fevicol , nails without head , nails with head , cast iron cowls 75mm bore , pvc water tank 500 ltr , pvc water tank 500 ltr , pvc water tank 1000 ltr , pvc water tank 1000 ltr , pvc water tank 5000 ltr , identification sign cautionary mandatory and information sign board , epoxy resin hardener kit for fixing of cat eyes road studs , star delta starter fully automatic suitable for electric motor of capacity 20 hp

CTN :39875818

09 Apr, 2025 NA

Delhi - Delhi

Tender For supply of road stud (v2) (q3) , road delineator (v2) (q3) , rigid / flexible median marker (q3)

State Government

CTN :39872309

11 Apr, 2025 3.38 Crore

Idukki - Kerala

Tender For the estimate includes usual items for bm bc tarring including carriageway widening with gsb wmm , eroded shoulder rectificion by 15cm of m10 and 5cm of m15, drain repair, coverlab, markings, road studs, sign boards etc

corporations/Associations/Others

CTN :39859708

15 Apr, 2025 14.78 Crore

Surat - Gujarat

Tender For resurfacing of roads (phase-16)within surat city limit by cementgrouted bituminous mix (cgbm) bycontractors own drum mix typehotmix plant to be installed withinsurat city limit with sensoroperator paver finisher includingrepair of footpath, divider, watertable and providing laying/ fixingof pavement markings, road studswith other traffic safety measures.(2nd attempt)

State Government

CTN :39825748

05 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For annual repair & m/d to bhatta kuffer to aimss [igmc phase-11) in km. 0/00 to 2/400 15 providing and fixing of road studs [hill side) at rd. 0/350 to 0/525).

State Government

CTN :39826221

16 Apr, 2025 24.25 Lacs

Dharmanagar - Tripura

Tender For providing and fixing of semi reflective cautionary sign board road studs road delineators etc in road intersections during the year 2025-26

State Government

CTN :39832030

03 Apr, 2025 6.33 Lacs

Tamluk - West Bengal

Tender For digha foreshore road from 82.30 km to 84.835 km and 86.335 km to 88.50 km, emergent traffic calming measure by installation of traffic signage, road marking, road studs and other allied works under tamluk highway division in the district of purba med

CTN :39836437

05 Apr, 2025 NA

Delhi - Delhi

Tender For supply of rigid / flexible median marker (q3) , road stud (v2) (q3) , road delineator (v2) (q3)

CTN :39816336

15 Apr, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of solar edge indicatior , gantry sign board 12 , cantilever sign board 6 , mile stone retro reflective sign board , cautionary sign retro refletive tape right hand , cautionary sign retro reflective tape left hand , cautionary sign retro reflective tape go slow , cautionary sign retro reflective tape speed limit , double chevron sign board , cautionary sign retro reflective tape compulsory sound horn , chevron sign retro refelctive tape , road delineator , solar road stud , informatory signage bothside retro reflective tape , gurdrail reflector yellow , gurdrail reflector white , led vms , testing and installation of vms

Road Stud Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

State Government

State Government