Get complete information related to latest Rock Crushing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rock Crushing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rock Crushing Tenders.
Tender For supply of material for 500 bedded medical college jhansi. - earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, rcc work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inlcuding supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being inlcuded in the item., class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, class-150 half brick work in 1:4 cement and coarse sand mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including suply and wastage & overlapping.thermo-mechanically treated bars of grade fe-500d or more.", 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand), providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces, providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., one priming coat & one coat oil distemper on new work inlcuding supply of all materials. labour and t&p etc. required for proper completion of the work, painting or varnishing or iron works in small areas with one coat of ready mixed in priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of work paint to be used should confirm to the i.s.i. no. 103 1950, finishing walls with acrylic smooth exterior paint of required shade: - new work (two or more coat applied @ 1.67 ltr./10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm., kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid
Tender For corrigendum : installation of children playing equipment/fountain at womens /children park kulgam (balance work). - (a) : civil work for (construction of fountain)earthwork in excavation by mechanical means for foundation, trencheing, incl. dressing of sides and ramming of bottom by mechanical means within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. backfilling, compacting in foundation trenches and carriage, providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:2:4) mix including curing, carriage, but excluding form work. (circular bed), a) centering and shuttering including strutting, propping etc. complete including removal of form work.(below ground), b) centering and shuttering including strutting, propping etc. complete including removal of form work.(above ground), reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete., providing and laying gang saw cut of thickness 30 mm , mirror polished pre molded and pre polished machine cut granite stone of required size and shape of approved shade, color and texture laid over 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joints with white cement mix with matching pigment , epoxy touch ups etc. complete as per the directions of eic., providing and laying of matt finish vitrified tile of size (300x300x9.8)mm having water absorption less than 0.5% and confirming to is 15622 of approved make in all colors and shades laid on 20mm thick base of cement mortar 1:4( 1 cement : 4 coarse sand) including grouting bthe joints with white cememt mix with matching pigment , epoxy touchups etc., complete as per the directions of eic., (b): civil work for control panel (8x4)earthwork in excavation by manual means for foundation, trencheing, incl. getting out excavated earth and disposal of surplus excavated eath and includes dressing of sides and ramming of bottom, within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. compacting in foundation trenches and carriage includes backfilling., providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete.@50kg/cum., providing and fixing of class b medium duty g.l. pipe (100mm dia, 6mm thick) conforming to is 1239 including welding, fitting elbows, tees flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the ms plate by welding and painting with two or more coats of synthetic enamel paint of suitable shade complete as required., providing and fixing of flange plates (8x8) and 8mm thickness, including welding with gi pipes & drilling holes etc., providing and fixing of foundation bolts type "j" (m20x300)mm, including nuts and washers as required thereof. the job includes providing steel rods of appropriate size to fix bolts properly in concrete., structural steel work (welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by eic.qty @5kg/sft, providing and fixing of ismc:75 channel sections as per the site requirement and approved by eic. the job includes cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as directed by eic., providing and fixing coloured high rib corrugated g. s. sheet (18 swg) roof
Tender For repairs to excavated remains in outer side of mint areas at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), random rubble masonry with hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including t & p, material, scaffolding etc complete. (rate including g.s.t.), providing coursed rubble pathway with hard stone with :cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour t&p etc. required for proper completion of work. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6)mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), providing and fixing of r.s. joist (175x85x5.80)mm for hanging of m.s. gate including priming at diwan-e-am, fatehpur sikri, agra. (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), pointing on stone masonry with cement mortar (1 cement, 3 c.sand) mixing with coloring pigment, t & p, scaffolding etc complete. (rate including g.s.t.), steel work in built up tubular trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. electric resistance or induction butt welded tubes. (rate including g.s.t.), painting with synthetic enamel paint of approved brand and manufacture of required colour :two or more coats on new work. (rate including g.s.t.), red sand stone 75mm thick top fixing in m.s. iron frame/ pathway fine dressed on all exposed surface in required pattern and all material labour t&p etc. required for porper completion of work. (rate including g.s.t.), disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. (rate including g.s.t.), providing and fixing of red sand stone benches having 4 legs of size (0.25x0.25x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (rate including g.s.t.), hiring charges of electric / diesel mixer grinder for mortar with operator and fuel etc. co
Tender For providing of horticulture service - maintenance based model - routine maintenance of horticulture works such as-lawns flower beds; routine maintenance of horticulture works such as-lawns flower beds,horticulture service - maintenance based model - disposal of garden waste excavated earth, building rubbish and alike by mechanical transport including loading; disposal of garden waste excavated earth, building rubbish and alike by mechanical tran..
Tender For providing of horticulture service - maintenance based model - routine maintenance of horticulture works; routine maintenance of horticulture works,horticulture service - maintenance based model - disposal of garden waste excavated earth building rubbish and alike by mechanical transport including loading; disposal of garden waste excavated earth building rubbish and alike by mechanical transp..
Tender For construction of pcc road at dudra village under csr - supply of clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. , earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. all kinds of soil. , excavating supplying and filling of local earth including royalty by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches plinth sides of foundation etc. complete. , construction of granular sub base by providing close graded material conforming to specifications mixing in a mechanical mix plant at omc carriage of mixed material by tippers to work site for all leads and lifts spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per specifications and directions of engineer in charge. with material conforming to grade ii size range 53 mm to 0.075 mm having cbr value 25 , providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size , centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand , 12 mm cement plaster of mix 1 isto 6 1 cement 6 fine sand , neat cement punning
Tender For corrigendum : supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor