Latest roller scrap Tenders | Government roller scrap Tenders

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government/Public Sector

CTN :45365852

20 Jun, 2026 40.00 Lacs

Kalimpong - West Bengal

Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther

CTN :45359737

06 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of head distributor , cam shaft , bush , vane pump , td piston , repair kit , solenoid switch , over flow valve , roller , oil filter kraz

CTN :45366895

08 Jun, 2026 NA

Bareilly - Uttar Pradesh

Tender For supply of mt spares d d - v belt 1280 mm long , rubber hose radiator to thermostat , element oil filter , light extension inspection no 2 with 10 , box assy steering gear , joint assy axle shaft rh , bush stabliser mount , tool box , shoe set rear brake , cylinder assy rear wheel rh , cover assy , s a of fly wheel , wiper blades , cabin light , solenoid valve for diff lock alt , arm windshield wiper , distributor head , injector , reverse light , motor engine starter electrical , ram hydraulic ram assy , fuel shut off solenoid , alternator 28 55a 9515 631 , clutch booster vg 3284 , hydraulic jack 20t with lever , cover assy , assy mudflap rear , drive assy , assy release cable comp centre flap , drive shaft , tool bag , arm windshield wiper , assy wheel chock , assy sunvisor rh , speedo cable jis 4300 lg , assy motorised head lamp complete 24v rh , relay , roller ring assembly , rubber hose , hand priming pump , slave cyl clutch , spanner adjustable a 300 is 6149 g 2 , starter motor 12 volts , distributor head , repair kit major slave cylinder , assy fog lamp front yellow lens rh , rep kit air dryer assy , major kit clutch master cyl repair , vane pump , rubber hose radiator to engine , lamp 24v 21wd 24 1 t529201 , fuel water seprator , horn 24 v , repair kit minor clutch m cyl , horn 12 v , relay solenoid engine starter electrical , filter element , rep kit for wheel cyl , delivery hose 38mm x 30 mtr , tommy bar with square drive head for ope , bucket water canvas 6 , brake bleeding tube , hydraulic jack 12 ton with handle , tyre pressure gauge , tin box lamp filament , bulb for warning lamps ba 9s 24v , parking light bulb for head lamp 24v 4w , head lamp lh , head lamp rh

CTN :45281969

01 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of circuit breaker , control valve , absorber assy rear shock , mounting engine front , turn light bl , roller brg , spring assy front , repair kit for main cyl clutch , stareters selection box , carbon brush , thrust rod , pinion , ram kit , gear fly wheel ring teeth , assy combi switch , protective bag , hose , oil seal , engagement clutch bush , lock ring , hose bore dia mm

CTN :45367026

15 Jun, 2026 NA

Gurdaspur - Punjab

Tender For supply of bearing tapered roller , air pressure pipe assy , master cyliner repair kit , ratchet kick starter , fan beltdimesnional details oc lenght , cap assy noise suppressor , bulb head light his 12 , stud bolt

CTN :45377041

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of mounting engine rear,speedo cable 3.2 dia 4300 mm long,repair kit for spring brake chamber,speedometer cable,roller brg rear,nut,hose

CTN :45377761

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of repair of epson head and pump assy,repair of canon printer power supply and main board,repair of hp printer logical card and taflon pressure roller,repair of epson printer head and services,repair of epson printer wasting pad and sensor,repair of canon printer head waste pad

CTN :45373332

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of lv7 tmb 2704 4680 0120 assy high pressure hose,lv7 maruti 09320m16006 bush,lv7 maruti 41110m80041 spring assy front,lv2 icvs sb 20 35 70 4 fuel sup flexible hose assy,lv7 tmb 2786 0198 9918 gasket valve cover,lv7 tmb 2573 2910 0161 repair kit for slave cylinder,lv7 scorpio nk hose steering pump to gear,lv7 maruti 17120 81a00 clutch assy fan,lv7 maruti 17841m60a00 hose radiator inlet,lv7 maruti 41310m75m00 spring assy rear rh,lv7 tmb 2530 017910 assy master cylinder 25 4 dia,lv7 tmb 3110 108998 tapper roller bearing,lv7 stln 2920 72 0471172 ignition switch,lv7 tata 2520 012550 propeller shaft,lv7 tata 6350 001129 horn assy,lv7 scorpio 0603ba0291 brake pad,lv7 scorpio 0603ba0290n brake pad front,lv7 hmv 503259200133 hp hose,lv7 maruti 43588 73000 protector oil seal,lv7 maruti 5330 331676 gasket cyl head,lv6 mt6 4720 015312 hose pipe to pump

CTN :45363587

04 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts for scania veh - repair kit (water pump shaft) part no 550167, roller bearing part no 192599, safety valve part no 303441, alternator assy part no 1117252(371972)

Roller Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector