Latest rolling shutter door Tenders | Government rolling shutter door Tenders

Central Government/Public Sector

CTN :39402468

12 Mar, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of cs sluice/gate valve 250mm , cs swing check valve size 250 mm , cs sluice/gate valve size 300 mm

Central Government/Public Sector

CTN :39171113

03 Mar, 2025 1.80 Crore

Secunderabad - Telangana

Tender For corrigendum : replacement of security equipment installations at dmde office complex under ge i rnd kanchanbagh, hyderabad - supply and fixing of electric fencing - 520 rm as specified below as per site requirement including taking down existing fencing with all connected accessories viz. energizer, boom barrier, hydraulic tyre killer, turnstile gate, swing lane barrier, fencing posts, fencing wire, insulators, door frame metal detector etc, complete all as specified and directed by engineer-in-charge., (a) general description(a) this scope involves, design, supply, installation, testing and commissioning of a non-lethal high security. electrical fencing for the purpose of deterrence, detection, and movement control of people / unwarranted trespassing into the premises for 520-meters perimeter length.(b) anyone who touches the power fencing when the system is armed shall be repelled by a short, sharp, painful, but safe pulsed dc high voltage shock. alarms shall be generated when someone touches, tries to climb through or tampers with the power fencing system., (c) the electric fencing shall be divided into two zones.(d) this system should be able to alert security personnel of an attempted intrusion and identify the zone around the perimeter of the site.(e) the electric fence is to be installed on the existing wall and the height of the fence will be 1.1 meters from top of the wall with 11 nos. of fence wires having 100mm gap between adjacent wires and it measure 1mtr.(f) electric fence posts are to be hot dip galvanized., (g) distance between strain fence posts spacing shall not exceed 50-meter nominal.(h) distance between intermediate fence posts spacing shall not exceed 3-meter nominal.(j) the electric fence shall incorporate uv stabilized intermediate post insulators.(k) warning signs shall be mounted around the fence line at intervals not exceeding 10m or at every turn on the physical fence.(l) dual zone fence energizer shall be installed to create 2 zones at site., (m) one dual zone led keypad shall be connected to fence energizer for local control and programming purpose.(n) a touchscreen controller should be placed in control room. fence energizer should communicate with touch screen controller over rs485 network.(o) the space between adjacent wires on the electric fence shall be no more than 10cm.(p) anti-climb configuration at strain points shall be provided. electric fence wire shall be looped around the strain post and connected back onto itself.(q) all high voltage impulse wiring shall be run in conduit separate from any other wiring.(r) the fence energizer shall be mounted in the weatherproof enclosure.(s) the energizer should comply with iec 60335-2-76 and is302-2-76 standards., (b) technical specification (electric fence system):energizerthe fence energizer should have the following minimum features: energizer should be dual zone with independent zone control. energizer should communicate with control room on rs485 network. energizer should have lcd display with background colours which changes according to the status of the energizer. green colour should indicate that all is fine, orange indicate that attention is required and red indicates an alarm condition., energizer should display the following information when specific codes are inserted from keypad: fence health on a scale of 1 to 9 for each zone independently, fence output voltage, fence return voltage, energy stored, capacity used and battery voltage. output energy 3.7 joule with 500 ohms load. pulse interval 1 sec. pulse duration should be less than 0.1ms. energizer should have apt - adaptive power technology functionality. which means the energizers should offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. this maximises the power on the fence and minimises false alarms., individual high voltage transformer for each zone. magnetic tag switch should be provided for on/off the ene

State Government

CTN :38871232

03 Mar, 2025 45.25 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of spares of fly ash system for unit no. 1 to 4 ph i and ii, sgtps, mppgcl, birsinghpur. - diffuser mounting plenum assembly for nuva diffuser feeder 12x10, seat for nuva diffuser feeder 12x10, disc for nuva feeder diffuser feeder 12x10, inside lever for 12x10 nuva diffuser feeder, shaft with key for nuva diffuser feeder 12x10, 25 nb diaphragm operated pressure valve 2 way model no. kpl/25d of eastern pneumatics, 40 nb diaphragm operated pressure valve 2 way model no. kpl/40d of eastern pneumatics, diaphragm assembly set with spring for 25 nb dia diaphragm valve , diaphragm assembly set with spring for 40 nb dia diaphragm valve , pneumatic cylinder size 6" bore x 7" stroke assembly, body fluidizer(fluidizing pad) 4 wide 48 long with imported ss element & ms bolt for nuva diffuser feeder, adjustable compression spring for disc of nuva feeder diffuser feeder 12x10, spares for 18 swing gate v/v of transfer hopper, shaft with key for transfer hopper, seat & disc for 18 transfer hopper valve assembly , pivot ball assembly of transfer hopper, outside lever , inside lever, supporting (reinforcement) disc, gun metal nrv 25 mm, body casing for 18 swing gate v/v, pneumatic cylinder size 4" bore x 6-3/8" stroke assembly, bearing housing (support plate) with oil seal for 18 swing gate v/v of transfer hopper, s.s. stud bolt 12x50 with double nut, s.s. stud bolt 12x75 with double nut, spares for 2.5, 2 way vent valve, two way vent valve complete assembly, valve seat for two way vent valve, valve disc for two way vent valve, shaft with key for 2 way vent valve, 2.5 vent v/v inside lever, roll pin for 2 way vent valve., pneumatic cylinder size 2.5" bore x 4" stroke assembly, body casing, flow regulator (size-1/4) for pneumatic cylinder (2.5x4")

corporations/Associations/Others

CTN :39298399

21 Feb, 2025 38.58 Lacs

Bokaro - Jharkhand

Tender For tender for supply of different sized cast steel gate valves globe valves and check valves - 100 nb , globe valve , 150 class , bs 1873 standard bolted bonnet , flanged ends with body material- wcb and trim- 13 percent cr. steel , cast steel globe valve complying to bs 1873 standard bolted bonnet , flanged ends with body material- wcb and trim-13percent cr. steel , class- 150 , size- 150 nb , 200 nb cast steel globe valve complying to api 600 standard bolted bonnet , flanged ends with body material- wcb and trim-13 percent cr steel , class-150 , carbon steel globe valve with m s. companion flange. i) class- 150 ii) type- straight iii) bolted bonnet iv) type of end connection- flanged 1. body and bonnet- astm a 216 gr. wcb 2. disc- 13percent cr steel on wcb a 216 gr.3. seat ring- 13percent cr steel on wcb a 216 gr. aisi 410 4. stem- a isi-410-2 astm a 182 gr. f6a 5. yoke- cs astm a 4396. sizes- conform to b 16.107. flanged drilling- conform to ansi b 16.5design / specification-i) design std- bs 1873 ii) testing pr- 6755 (part i api 598) application- i) working pressure- 10 kg per cm2 ii) working tem- 50 deg c iii) flow medium- filtered water/steam size- 300 mm , 80 nb , gate valve , 150 class , api 600 standard bolted bonnet , flanged ends with body material- wcb and trim- 13 percent cr. steel , 100 nb , gate valve , 150 class , api 600 standard bolted bonnet , flanged ends with body material- wcb and trim- 13 percent cr. steel , 125 nb cast steel gate valve complying to api 600 standard bolted bonnet , flanged ends with body material- wcb and trim-13 percent cr steel , class-150 , 150 nb cast steel gate valve complying to api 600 standard bolted bonnet , flanged ends with body material- wcb and trim-13 percent cr steel , class-150 , 200 nb cast steel gate valve complying to api 600 standard bolted bonnet , flanged ends with body material- wcb and trim-13 percent cr steel , class-150 , 250 nb cast steel gate valve complying to api 600 standard bolted bonnet , flanged ends with body material- wcb and trim-13 percent cr steel , class-150 , cast steel gate valve complying to api 600 standard bolted bonnet , flanged ends with body material- wcb and trim-13percent cr. steel , class- 150 , size- 300 nb , 80 nb cast steel swing check valve complying to bs 1868 standred bolted bonnet , flanged ends , non-turning swing disc arrangment with inside huge pin and body material-wcb and trim -13 percent cr steel , class-150 , 100 nb cast steel swing check valve complying to bs 1868 standred bolted bonnet , flanged ends , non-turning swing disc arrangment with inside huge pin and body material-wcb and trim -13 percent cr steel , class-150 , 125 nb cast steel swing check valve complying to bs 1868 standred bolted bonnet , flanged ends , non-turning swing disc arrangment with inside huge pin and body material-wcb and trim -13 percent cr steel , class-150 , 200 nb , check valve (swing) , 150 class , bs 1868 standard bolted bonnet , flanged ends , non turning swing disc arrangement with inside huge pin and body material- wcb and trim- 13 percent cr. steel , nrv , cast carbon steel ( astm a216 gr. wcb) double flanged single disc swing type nrv , bolted cover , design pressure-30 kg/cm2 , flanged to drilled to ansi b16.5 class 150rf , size - 250 mm , 300 nb , check valve (swing) , 150 class , bs 1868 standard bolted bonnet , flanged ends , non turning swing disc arrangement with inside huge pin and body material- wcb and trim- 13 percent cr. steel , 80 nb cast steel globe valve complying to api 600 standard bolted bonnet , flanged ends with body material- wcb and trim-13 percent cr steel , class-150

Central Government And Public Sector

CTN :39056921

01 Mar, 2025 NA

Narora - Uttar Pradesh

Tender For corrigendum : supply of ibr certified forged carbon steel gate valve- general purpose ball valves (v2) (q4) , ibr certified forged carbon steel gate valve one , ibr certified forged carbon steel gate valve two , ibr certified forged carbon steel gate valve three , ibr certified forged carbon steel gate valve four , ibr certified carbon steel gate valve five , ibr certified carbon steel gate valve six , ibr certified carbon steel gate valve seven , ibr certified carbon steel gate valve eight , ibr certified carbon steel gate valve nine , ibr certified carbon steel gate valve ten , ibr certified carbon steel gate valve eleven , ibr certified carbon steel gate valve twelve , ibr certified carbon steel gate valve thirteen , ibr certified carbon steel gate valve fourteen , ibr certified carbon steel gate valve fifteen , ibr certified carbon steel gate valve sixteen , ibr certified carbon steel gate valve seventeen , ibr certified carbon steel gate valve eighteen , ibr certified carbon steel gate valve nineteen , ibr certified carbon steel gate valve twenty , ibr certified carbon steel globe valve twenty one , ibr certified carbon steel globe valve twenty two , ibr certified carbon steel globe valve twenty three , ibr certified carbon steel globe valve twenty four , ibr certified carbon steel globe valve twenty five , ibr certified forge carbon steel globe valve twenty six , ibr certified carbon steel swing check valve twenty seven , ibr certified carbon steel lift check valve twenty eight , ibr certified ss lift check valve twenty nine , ibr certified carbon steel lift check valve thirty

State Government

CTN :38695052

20 Feb, 2025 NA

Hoshiarpur - Punjab

Tender For bid to ras supply of swing check type reflux, non- returns valves,solid wedge brass gate valve class 1, size 100 mm nb,g.m bronze gate valve class 1 size 40 mm nb,g.m bronze brass gate valve class 1 size 25 mm nb,g.m bronze brass gate valve class 1 size 20 mm nb,ball valve

Central Government/Public Sector

CTN :39322851

22 Feb, 2025 NA

Goa - Goa

Tender For supply of assy, 6ft flat dual lg, blank w/side swing gate make: terex

Central Government/Public Sector

CTN :39258805

28 Feb, 2025 7.06 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of foot valves for water works purpose as per is 4038 (latest) (q3) , swing check type reflux valves for water works purposes (single door pattern) (v2) as per is 5312 (part1) (q3) , sluice valve for water works purposes (50 to 1200 mm size) (v2) as per is 14846 (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3)

corporations/Associations/Others

CTN :38879362

20 Feb, 2025 NA

Bokaro - Jharkhand

Tender For corrigendum : supply of gate valve 150mm , swing valve 200nb , gate bs 100 nb , gate bs 80 nb , gate bs 200 nb , swing valve 150nb , glove valve , 65 nb manual

Rolling Shutter Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors