Latest rotary burr Tenders | Government rotary burr Tenders

Central Government/Public Sector

CTN :38965194

27 Jan, 2025 NA

Tumkur - Karnataka

Tender For tender for supply of chemicals - cherry max hand squzeer , cherry max gun with adaptor , spin tight-5 mm , spin tight-8 mm , spin tight-10 mm , spin tight-6 mm , spin tight-7 mm , collet gun -30 deg -1/4inch , collet gun - 90 deg - 8mm (5/16inch) , clico plier standard , screw driver philips 200mm 8inch , screw driver flat 10inch , impact driver bit set - 1/4 inch , tap & die set , chisel set with wooden handle , rotary burrs set , rivetgun 2x (short length) , pneumatic rivet gun 3x , c-clamp 4inch , combination square set 300mm , clico pins 5.0 mm , centre punch - approx. 3inch length , prick punch - approx. 5 mm , reamer m/c parallel hss dia 4 h7 , reamer hand parallel , hss , dia5mm h7 , reamer hand parallel , hss , dia6mm h7 , reamer hand parallel , hss , dia 8mm h7 , reamer hand parallel , dia10 , h7 , hss , sabre saw with blades , 5hacksaw frame 520mm length , hacksaw blade - 12inch , counter sink parallel , dia 2.18 , 5%co , counter sink parallel , dia 4.8 , 5%co , counter sink parallel , dia 5.5 -5%co , counter sink parallel , dia 6.3 -5%co , belt sander - 20 x 520 mm , 30 d drill gun collet type , 360 d drill gun , collet type , st. drill gun , collet type , led head lamp with motion sensor , inspect creeper with adj head rest , magnetic retriever - luminous , adjustable wrench - 6inch to 18inch , open end wrenches- midget , pipe cutter-tube o.d- 6 to 43 mm , cordless screw driver gun - 10 mm , pneumatic die grinder- 6 mm collet , screw driver(short) - slot head , screw driver(short) - philip head , screw driver(short) - pozidriv head , needle file set 140mm , knife - lock back type , digi portable weigh scale 100 gms

CTN :38960688

05 Feb, 2025 NA

Kharagpur - West Bengal

Tender For supply of tungsten carbide tipped tamping tools (tctt) for dynamic tamping express machine as p er rdso specification no - tm/hm/6/320(rev-3), (each set consist of following two types of tamping too ls) (i) plasser pt.no - cu30.10840fri = 32 nos. rdso drawing no - tm/15a/16 and (ii)plasser pt.no - cu30.1 0840frv = 16 nos. rdso drawing no - tm/15e/16 [ warranty period: 30 months after the date of deliver y ]

CTN :38960906

12 Feb, 2025 NA

Kanchrapara - West Bengal

Tender For supply of tungsten carbide tamping tool (tctt) set for old csm/duo as per rdso spec.not m/hm/6/320 (rev-3).each set consist of following four type of tamping tool set. (1) tamping t ool (type-i) as per rdso drg. of tool: rdso/tm/14a/16 qty.=16nos./set. (2)tamping tool (type-ii) drg. of tool : rdso/tm/14b/16 ,qty.= 04 nos./set. (3)tamping tool (type-iii) as per rdso drg. of tool : rdso/tm/14c/16 ,qty.= 04 nos./set). (4)tamping tool(type-iv), drg. of tool : as per rdso r dso/tm/14d/16 ,qty.= 08 nos./set.total tamping tools in a set is 32 nos. (drawing of tools att ached) make: own make equivalent to plasser [ warranty period: 30 months after the date of deliv ery ]

Central Government/Public Sector

CTN :38878662

23 Jan, 2025 NA

Faridabad - Haryana

Tender For tender for supply of miscellaneous tools - blade hand hacksaw hss 300mm 12.5x0.63mm , measuring tape steel 15m , engr file triangular 2nd cut 250 20 mm , end mill cutter parall shank size 4 mm , hss parallel twist drill 4.0mm is 5101 , hss parallel twist drill 4.5mm is 5101 , hss prl.drill bit is 5101-1991.size 6.5. , bit drill parallel twist drill hss 8.0mm , hss parallel twist drill 9.0mm is 5101 , hss parallel twist drill 9.5mm is 5101 , hss parallel twist drill 10.0mm is 5101 , hss parallel twist drill 10.5mm is 5101 , hss prl.drill bit is 5101-1991.size 11. , hss taper drill (is-5103 69)-16.5 mm , hss taper shank drill (is-5103 69)-17 mm , hss taper drill (is-5103 69)-17.5 mm , hss taper drill (is-5103 69)-21.5 mm , hss taper drill (is-5103 69)-22.5 mm , bit drill taper twist drill hss 3mm , bit drill morse taper twist hss 32mm , hss tap.drill bit is 5103-1969.size 8.5. , cutter w ps end mill a 80x10mm is6353 , emery paper 320 , grinding wheel 4 , cut off wheel size 100 mm od 16mm id 3mm , cutter w ps end mill hss 6mm , cutter w ps end mill hss 12mm is6353 , cutter w para shank end mill hss 10mm , cutter w ps end mill solid carbide 16mm , para shank cutter end mill hss 20mm

CTN :38821903

17 Jan, 2025 NA

Panchkula - Haryana

Tender For tender for supply of tools collet chuck and end mill holders - er32 set of collet dia 2mm to 20mm ref code 32ers000m , bt40 er32 collet chuck with wrench bt40er32070m , bt40 er32 collet chuck with wrench bt40er32120m , bt40 er16 collet chuck with wrench bt40er16060m , er16 collet dia 01 mm er16010m for collet chuck item 4 , bt40 er32 collet chuck gl120 with wrench bt40er32120m , bt40 er32 collet dia 6 mm 32er060m , drill adopter for holding shank mt1 bt40mt1 1050m , drill adopter for holding shank mt2 bt40mt2 2050m , drill adopter for holding shank mt3 bt40mt3 3070m , drill adopter for holding shank mt4 bt40mt4 4095m , key less drill chuck range dia 01-13mm , square shoulder face mill dia 20 mm cylinderical shank ap 11 z 2 oal 81 , suitable inserts iso p30 for above face mill dia 20 , square shoulder face mill dia 25 mm cylinderical shank ap 11 z 2 oal 88 , suitable inserts iso p30 for above face mill dia 25 , square shoulder face mill dia 40 mm cylinderical shank ap 17 z 4 oal 110 , suitable inserts iso p30 for above face mill dia 40 , solid carbide end mill dia 3 mm straight shnak dia 6 mm ap 7 mm flute 2 oal 57 , solid carbide end mill dia 4 mm straight shnak dia 6 mm ap 8 mm flute 2 oal 57 , solid carbide end mill dia 5 mm straight shnak dia 6 mm ap 10 mm flute 2 oal 57 , solid carbide end mill dia 6 mm straight shnak dia 6 mm ap 10 mm flute 2 oal 57 , solid carbide end mill dia 3.1 mm straight shnak dia 6 mm ap 6.2 mm flute 2 oal 45 suitable for material round bar gost 7415 75 , solid carbide end mill dia 3.3 mm straight shnak dia 6 mm ap 6.6 mm flute 2 oal 45 suitable for material steel is2073 1962 c55 mn75 , solid carbide end mill dia 4 mm straight shnak dia 6 mm ap 6 mm flute 2 oal 45 suitable for material brass bs2874 grade cz 122m1986 , bt40 end mill holder dia 20 , bt40 end mill holder dia 25 , bt40 end mill holder dia 40

Central Government/Public Sector

CTN :38819321

27 Jan, 2025 NA

Bhusawal - Maharashtra

Tender For "tungsten carbide tamping tools (tctt) for old csm / wst as per rdso specifica tion no.tm/hm/6/320 -rev-3 (july-2019) & rdso drawing no. details of drawing no.and qty of one set as under. 1-tungsten carbide tamping tool (tctt) as per drawing no. rdso/tm/14a/1 6=16 nos & equivalent to plasser part no. cu30-4020be-fr-i(16 nos in a set) 2- tungsten carbi de tamping tool (tctt) as per drawing no. rdso/tm/14b/16 = 04 nos & equivalent to plasser p art no. cu30-4020be-frii (04nos in a set) 3- tungsten carbide tamping tool (tctt) as per draw ing no. rdso/tm/14c/16-= 04 nos equivalent to plasser part no. cu30-4020be-fr-iii(04 nos in a set) 4- tungsten carbide tamping tool as per drawing no. rdso/tm/14d/16 = 08 nos equivale nt to plasser part no. cu30-4020be-fr-iv(08nos in aset)" detailed specifications as per annex ure-i for old csm, old duo machines. part make: plasser or equivalent, note: the necessary test cer tificate to be submitted by supplier along with supply of material. note: material supplied by firm should be fitted on machine without any modifications. warranty: 2,50,000 insertions (approx 300 kms of tamp ing) or 18 months from the date of fitment or 30 months from the date of supply, whichever is later, for an y manufacturing defects. if a tool fails before minimum service life of 50000 insertions, the firm should rep lace it free of cost. ]

Central Government/Public Sector

CTN :38744934

18 Jan, 2025 NA

Raigad - Maharashtra

Tender For supply of general consumables /items /tools- 1 300079137 cotton rags of muslin cloth, size: minimum 42 square inch (min. width:4 inch), packing: in non-returnable gunny bags of 10 kgs pack (exclusive of bag weight). note: 1. vendor shall submit sample for approval before bulk supply. 2. cotton rags should be nontoxic and should be free from chemicals, dust, grease and other impurities. 250 kg, 2 300063020, emery polishing paper, grade: 2/0, size: 9" x 11", make:carborundum universal, ltd/grindwell norton or equivalant, 100 no, 3 300063021, emery polishing paper, grade: 4/0, size: 9" x 11", make:carborundum universal, ltd/grindwell norton or equivalant., 100 no, 4 300089395 emery polishing paper in standard size, 0/0 grade. 100 no, 5 300132949, flap disc , 125 mm od x22.23 mm bore,, grit 60, type straight, make, carborundum/ grindwll norton/ bosch/, abro/cgw., 150 no, 6 300063043 oil stone finishing stick medium cross, section 1" x 6" length. 25 no, 7 300063045 oil stone finishing stick coarse cross, section 1" x 6" length. 20 no, 8 300063046 oil stone size 2" x1" x 6", long,coarse/fine. 20 no, 9 300063540 tape ptfe size:0.07 mm. x 19 mm.x, 12000 mm. 100 no, 10 300063672 cloth marking-cotton,size length (1m)x, width (standard) 1,000 no, 11 300063678 good quality polythene bags,self, sealing,size 6" x8" . 500 no, 12 300063679 good quality polythene bags,self, sealing, size 10" x12 500 no, 13 300078617, paper grinding wheel(flapper wheel), cutfast make, 80 grade,od 2" with 6, mm diameter arbor, 100 no, 14 300130884, woven wire mesh, 80 mesh size for oil, filtration moc: stainless steel size:, 1 m x 1m, 10 no, 15 300130886, woven wire mesh, 120 mesh size for oil, filtration moc: stainless steel size:, 1 m x 1m, 10 no, 16 300135049, wire mesh for strainers,, mesh size: 140 mesh,, square mesh plain weave,, width: 1 meter,, wire dia: 0.070 mm,, opening- 111 micron,, material of wire:ss304., 10 m, 17 300130872 copper rod 4 inch dia. rod length: 500, mm 2 no, 18 350000174 needle files set.( one set consist of, 12 nos ) size 16 cms. 10 st, 19 300023313, wire scratch brush with wooden handle,, number of rows for bristle:3,, bristle type: steel., note: wooden portion of brush should, be good quality and free from, pores/cracks., 100 no, 20 300070272, wire scratch brush with wooden handle,, number of rows for bristle:4,, bristle type: stainless steel., note: wooden portion of brush should, be good quality and free from, pores/cracks., 100 no, 21 300063661 wire brush ms for cleaning with wooden, handle size 2" . 100 no, 22 350000299 carbide tip scrapper of 1/2" tip, width. 10 no, 23 350000300 carbide tip scrapper of 3/4" tip width 10 no, 24 350000301 carbide tip scrapper of 1" tip width. 10 no, 25 350001449 carbide tip triangular hand scrapper,, length 12 inch 10 no, 26 350001450 carbide tip semi circular hand, scrapper, length 12 inch 10 no, 27 300069619, plastic container (transparent) round, with screwed cover, size: 5" height x, 4" o.d., 200 no, 28 300070247, plastic container (transparent) round, with screwed cover. size 3" height x, 2.5" od., 200 no, 29 300022736 mallet wooden 3 in 15 no, 30 300022718, chisel cold flat 5/16 in dia x 5 inch, long ; make: taparia or jhalani or, gadre make only, 10 no, 31 300022719, chisel cold flat cut length: 6",, width:1/ 2", octagon: 3/8" conforms to, bs 3066. make: taparia or jhalani or, gadre make only, 10 no, 32 300022720, chisel cold flat 1/2 inch dia x 6 inch, long ; make: taparia or jhalani or, gadre make only, 10 no, 33 300022721, chisel cold flat 5/8 inch dia x 6 inch, long ; make: taparia or jhalani or, gadre make only, 10 no, 34 300022722, chisel cold flat cut length:8",, width:7/8 ", octagon : 3/4" conforms, to bs 3066. ; make: taparia or jhalani, or gadre make only, 10 no, 35 300094464 lead wire with uniform circular cross, section of 0.1 mm 3 kg, 36 300098051, lead wire with uniform circular cross, section of 5.0 mm;, moc: lead, 3 kg, 37 300098052, lead wire with uniform circular cross,

corporations/Associations/Others

CTN :38664208

17 Jan, 2025 NA

Bankura - West Bengal

Tender For proposal for procurement of different type general tools for machine shop of mtps dvc - webbing sling cap 3t sz 3 inc wx10ft l eye loop both end , polyester web lifting belt sz w 50.8mm 2mt lifting cpct 2t , m2 hss par shank twist drill 4 mm , tips carbide lhs 3 by4 inc x 3 by4 in , hss q tool bit 10 pct co 0.5 inc q x 6 inc l grd s400byt42 , hss tool bit 3by8 x 3 by8 x4 inc , m2 hss taper shank twi drill 14.0 mm , m2 hss taper shank twi drill 8.0 mm , m2 hss hand tap non serial gt mfp 26x2 , m2 hss hand taps mcp m 24 , hss hand tap mcp m20x2.50 set , m2 hss gt hand tap mcp m 16 set , hand tap size 11 by 4 in 1.25 in bspp thread , hss hand tap with die and handle m4 handle for tap , m2 hss gt hand tap mcp m 8 x1.25 mm , m2 hss gt hand tap mcp m 6 sets , m2 hss par shank twi drill 8.5 mm , m2 hss par shank twi drill 6.5 mm , m2 hss par shank twi drill 7.5mm , tips carbide rhs 3 by 4 inc x 3by4 in , hss tool 3 by 8 sq inx6 inc miscl hand tool , hss sq tool bit 10 pct cobalt s0.75 inc sq x 4 inc , brazed tungsten carb tip rh prof s0.5 inc sq , brazed tungsten carb tip rh prof s0.75 inc sq , brazed tungsten carb tip lh prof s0.5 inc sq , brazed tungsten carb tip lh prof s0.75 inc sq , cutting tool 1x8 , right hand side cutng tool s 20 x 20 x 150 , left hand side cutng tool s 20 x 20 x 150 , v cutng tool s 20 x 20 x 150 , cutng tool 3by4x6 , carb tipped v tool 3by4 x 3by4 inc , hss pannal shank end mill cutter 30mm , hss pannal shank end mill cutter 28mm , hss pannal shank end mill cutter 22mm , hss pannal shank end mill cutter 16mm , hss pannal shank end mill cutter 10mm , drill bit 8mm , drill bit 6mm , hss drill bit 12mm , drill bit 10mm , cutter end mill ps 16 mm , cutter end mill ps 12 mm , cutter end mill ps 5 mm , tap hand 10 mm hss ground thread , tap hand 12 mm, hss ground thread , tap hand 8 mm hss ground thread , tap hand 6 mm hss ground thread , tap hand hss bsw 1by4 inc , tap hand hss bsw 3by8 inc , drill bit ss 9.5 mm , hss parral shank end mill cutter 6mm , turning tools iso 6l 3232k20 carb tip , borg tool iso 8r 1212p30 , borg tool iso 8r 2525 p30 iso 8r 2525p30 carb tip , vernier ht gag manual mk mitutoyo 18 in 460 mm , gw for tungsten carb grit 120 by140 sz 150x20x12.5mm b 31.75 pdstl grnind mc rpm 2250 to 2800 hp1 p 3 , grinding wheel sz 150x25x12.7 mm , hss par shank twi drill bit 10 pct co s9.5 mm , hss par shank twi drill bit 10 pct co s8.5 mm , hss par shank twi drill bit 10 pct co s8 mm , turning tool iso 6l 2020k20 carb tip , hss par shank twi drill bit 10 pct co s7.5 mm , hss par shank twi drill bit 10 pct co s7 mm , hss par shank twi drill bit 10 pct co s6.5 mm , hss par shank twi drill bit 10 pct co t s6 mm , hss par shank twi drill bit 10 pct co s5.5 mm , hss par shank twi drill bit 10 pct co s12 mm , turning tool iso 6r 3232k20 carb tip , hss par shank twi drill bit 10 pct co s11.5 mm , hss par shank twi drill bit 10 pct co s11 mm , hss par shank twi drill bit 10 pct co s 10.5 mm , hss par shank twi drill bit 10 pct co s10 mm , turning tool iso 6r 2525k20 carb tip , turning tool iso 6r 2525p30 carb tip , iso 9r boring tool style 130 3232 , iso 9r boring tool style 130 2525 , canbide brozed tool iso 9r 2020 p30 , hss taper shank twist drill bit s28 mm , hss par shank twist drill bit 10 pct co s9 mm bid details/ 2 / 71

Rotary Burr Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others