Latest rotating spares Tenders | Government rotating spares Tenders

State Government

CTN :38600330

02 Jan, 2025 250.72 Crore

Bengaluru - Karnataka

Tender For dismantling of damaged structures/equipment, design, engineering, manufacture, quality surveillance, inspection & testing at suppliers works, supply, packing, forwarding to site, transportation, insurance, unloading, storage, preservation, handling at site, replacement/restoration, life extension works, civil works, erection and commissioning, trial operation including steam blowing, performance test of equipment/system and warranty of all mechanical, electrical, control & instrumentation systems, civil & other systems and handing over to the owner in an operating condition of rtps u1-210mw

corporations/Associations/Others

CTN :38468622

24 Dec, 2024 NA

Multi City - Multi State

Tender For installation, erection & commissioning services - dismantling of existing hp unix servers, dismantling of existing hp unix servers at kota, packing and shifting of hp-ux servers, shifting of material (workstations, gps, switches etc..) from bpcl- stores to the sites for installation / erection (at 7 nos. of sites), dismantling of existing server racks at bpcl,mumbai and bpcl,kota, erection of server rack (2100hx1000dx800w including mounting of 02 nos. of linux servers, 02 nos. of lds servers, kvm switch, sliding monitor, ethernet switches and kvm extenders into rack), termination and dressing of the same at bpcl, mumbai. note: supply of base frame shall be considered as part of the present line entry, erection of rtu panel size:2100x800x800 (mumbai-01 no. and kota-01 no.) with supply and erection of base frame, labelling of equipment, mounting of 02 nos. of linux servers, 02 nos. of lds servers, kvm switch, sliding monitor, ethernet switches and kvm extenders into the existing server cum network rack, termination and dressing of the same at bpcl, kota, dismantling of existing workstations at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan), installation of new workstations with monitors at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan), laying of cat6 cable for workstations, servers & network equipment, termination / croning / crimping with ferrules connectors & hoods and establishing the connectivity at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan) stations, laying of power cable (3c x 2.5 sqmm) cable, glanding and termination with ferrlues and establishing the connectivity at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan) stations, laying of earth cable (1c x 16 sqmm) cable, glanding and termination with ferrules and establishing the connectivity at the above places, services for establishing the connectivity between existing rtus & new linux servers and between existing mmis / rwss and linux servers (from mumbai and kota as well), services for sat and trial run making use of skilled resources (for min. period of 3 weeks) , vehicle hiring (as per the requirement) charges with 250kms per day, section-b: supply (i&c consumables) (supply of armoured power cable 3cx2.5sqmm); make: thermo cables/ key/ ploy cab / finolex / delton / udey pyro / havell, (supply of earth cable 1cx16sqmm); make: thermo cables/ key/ polycab / finolex / delton, supply of cat6 cable (make: commscope / amp / d-link); 02 bundles will be for mumbai and 01 no. for kota, supply of rj45 connectors (make: commscope / amp / d-link) with hoods (green and red clors for lan & lanb, multi-function meter (common for multimer & current source functionality) make: fluke model:705 optional, lan tester: make: d-link model:ntl-ct-001, reinforced pvc conduit.

CTN :38242050

19 Dec, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : providing of custom bid for services - dismantling of all galley utensils rack equipment stands and storage system

State Government

CTN :38406710

30 Dec, 2024 17.21 Crore

Bengaluru - Karnataka

Tender For corrigendum : establishing 2x12.5mva, 66/11kv sub-station at madalagere(bandri cross) and construction of 66kv lilo line using coyote conductor from existing 66kv itagi-harapanahalli sc line to proposed 66/11kv madalagere sub-station for a distance of 9.315kms in harpanahalli taluk, vijayanagara district on partial turnkey basis including supply of all matching materials/equipments (excluding supply of 11kv switchgear) and erection (including dismantling and civil works) of all materials/ equipment, testing and commissioning

CTN :38566868

23 Dec, 2024 1.13 Lacs

Barmer - Rajasthan

Tender For erection work at 132kv gss juna meetha khera & dismantling work at 132kv gss barmer of 15.43mvar abb make capacitor bank, dismantling & erection of structure, bus-bar, equipment and earthing work for 15.43mvar abb make capacitor bank

CTN :38546759

02 Jan, 2025 NA

Raebareli - Uttar Pradesh

Tender For dismantling and shifting of old sluice valve and other associated equipment (from pump no. 11 to 20) from pump house to storage facility with assurance of safety and minimal risk of damage to both personnel and equipment. the work includes dismantling, handling, loading, unloading, of all equipment. cost of all required materials, labour, and all necessary t&p will be under the scope of contractor at chaudharycharansinghdalmau "a" pump canal stage 1st, distt. raebareli

CTN :38490809

21 Dec, 2024 2.37 Crore

Vadodara - Gujarat

Tender For carrying out mechanical works (fabrication and erection of piping, equipment erection, equipment modification/ dismantling and associated works) on sub-contract

corporations/Associations/Others

CTN :38471091

27 Dec, 2024 50.73 Lacs

Navsari - Gujarat

Tender For work of dismantling, shifting and erection of indoor equipment from existing control room to new control room at 220kv navsari s/s under r&m plan 2022-23.

State Government

CTN :38402559

27 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of machineries & equipment for the electrician, fitter, lift & escalator mechanic, mechanic motor vehicle, machinist, operator advance machine tools, refrigeration air conditioning technician, solar technician, technician medical electronics, wireman, & welder trades.. - ac - air conditioner schedule, frost free refrigerator 200 l, three/four door refrigerator invertor (type), evacuating and refrigerant charging station, split a/c 1.5 ton with r32 refrigerant, duct able split a.c 3 ton with r410a or r-32 scroll compressor, cassette air conditioner 4500 kcal/hr, de scaling pump set, water cooler storage type, air conditioning, direct system complete with all controls including humidity control., air-conditioning, indirect system. (water cooled ), package a/c 5-ton capacity, bus a/c tutorial model, automatic ice cube m/c 50 kg/hour, vrf/vrv unit with two indoor units, split a/c (invertor technology), walk in cooler puf, air conditioner split type 2 tonne, au - automobile schedule, working model of air brake assembly, full floating axle and semi floating axle assembly, automative exhaust 5 gas analyser and diesel smoke meter (for petrol & diesel), diesel engine crdi - 4 stroke for dismantling and assembling with swiveling stand., multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer, cut section of 6 cylinder diesel engine in moving condition to show movement of internal parts, diesel engine six cylinder in running condition, air bag simulator, air conditioning service unit (car), four stroke petrol engine with cng setup-working condition, mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling, transfer case with stand for dismantling and assembly., two post car lift capacity 4000 kg, tyre changer machine motorized pneumatic type,, ultrasonic injection cleaning equipment, wheel alignment machine computerized 3d, wheel balancing machine, working condition of petrol mpfi engine assembly with fault simulation board, el - electrical schedule, oil testing kit:, solar panel 18 watt with battery, d.c. shunt generator with control panel 2.5kw,220v, motor-generator 5 kw (ac to dc), d.c. compound generator with control panel, motor- generator (dc to ac), synchronous motor 3 phase, 3 hp, 440 volt, 50 hz,4 pole, with all panel board accessories, three phase transformer shell type, electrical machine trainer, diesel generator set, dc generators series, shunt & compound type, solar street light, solar traffic light, solar d.c pump, solar panels, solar street light lamp set, motor- generator 3 kw (ac to dc), es - solar schedule, weather monitoring station, solar cell based sunlight radiation meter, solar simulator for solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells., solar tracker demonstrator kit, solar pv e-learning software using animations for trainee, solar pcu, solar grid tied inverter demonstrator kit, solar, wind, hybrid power plant, used water treatment solar plant demonstrator kit, demonstration kit for wind generation (wind turbine with blower), le - lift & escalator schedule, elevator control panel suitable for 5/8 passenger lift having separate input, output and cable alley chamber fitted with plc controller and related accessories., servo motor trainer 250w, 220/110v, working model of escalator, electromagnet brake assembly, door simulator set (car door, landing door and door drive unit), 5/8 passenger lift installed with all control and safety accessories, lm - light machineries schedule, drilling machine pillar 0-20 mm capacity with swivel table motorized with chuck and key, power hack saw machine 18 hydraulic, surface plate c.i 600 x 600mm with suitable stand and closed cover, slip gauge metric set 87 pieces in a box, work shop grade, drilling machine bench sensitive 13 mm capacity, slotter with base chuck, hm - heavy machineries schedule, pneumatic trainer k

CTN :38315785

18 Dec, 2024 2.18 Crore

Thiruvananthapuram - Kerala

Tender For purchase of tool and equipment in mmv and dcm trade in various itis under scdd - tool and equipment in mmv and dcm trade, ammeter dc with external shunt 300a/ 60a, auto electrical test bench, belt tensioner gauge, cleaning tray 45x30 cm, cylinder bore gauge capacity 20 to 160 mm, cylinder liner- dry & wet liner, press fit & slide fit liner, depth micrometer 0-25mm, different type of engine bearing model 10 different types on board, different type of piston model 5 different types on board, fuel injection pump (diesel) inline 4/6 cylinders rsv mechanical pneumatic governor type., fuel injection pump ve pump / distributor fuel rotary pump (dpc) pumps / along with special tools and accessories, injector multi hole type, pintle type, injector testing set (hand tester), automotive oil pump for dismantling and assembling., outside micrometer 0 to 25 mm, outside micrometer 25 to 50 mm, outside micrometer 50 to 75 mm, outside micrometer 75 to 100 mm, starter motor axial type, pre- engagement type & co-axial type, thread pitch gauge metric, timing lighter, turbocharger cut sectional view - latest wgt type to show turbine, impeller and compressor wheels., vacuum gauge 0 to 760 mm of hg., vernier calliper 0-300 mm with least count 0.02mm, automotive water pump for dismantling and assembling, working model of air brake assembly, carburetor solex, mikuny for dismantling and assembling, cut section models of shock absorbers, cut section of cross ply and radial tyres, cut section working model of centrifugal clutch assembly, demonstration board of mpfi system, drum brake assembly in working condition, full floating axle and semi-floating axle assembly, functional/experiment model of different type of sensors, steering assembly, synchronous gear box with stand for dismantling and assembly, automotive exhaust 5 gas analyser and diesel smokemeter (for petrol & diesel), diesel engine crdi - 4 stroke for dismantling and assembling with swiveling stand, diesel engine (running condition) stationary type single cylinder, multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer, working condition of diesel engine crdi - 4 stroke engine, assembly with fault simulation board, cut section of 4/6 cylinder diesel engine in moving condition to show movement of internal parts, diesel engine six cylinder in running condition, air bag simulator, air conditioning service unit (car), four stroke petrol engine with cng setup-working condition, mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling, tyre changer machine, ultrasonic injection cleaning equipment., wheel alignment machine computerized 3d (optional), wheel balancing machine, working condition of petrol mpfi engine assembly with fault simulation board, driving simulator, traffic signal board 2m length, 1m breadth, safety cones

Rotating Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government