Latest rpr test kit Tenders | Government rpr test kit Tenders

Central Government/Public Sector

CTN :45713891

20 Jul, 2026 20.00 Lacs

Chandimandir - Haryana

Tender For repair / maint of split acs 2/1.5 ton , windows acs 2 / 1.5 ton , voltage stablizers and connected items installed at command hospital (wc) and other various location in aor of age e/m ch - servicing of split type ac of capacity 2/ 1.5 tr after disconnecting all incoming and outgoing electric connection, water drain pipe line connection etc. and wash with approved chemical mixed water with the pressure pump, after servicing cleaned all the disturbed area and reassembling the water/electric connection and testing for entire satisfaction of engr-in-charge., all as per item no. 1 here-in-above but window type ac 2/1.5 tr capacity., supplying and charging of refrigerant gas r-22 only after vacuuming dehydration, leak testing of the system as per standard practice testing for proper cooling effects and satisfactory performance complete all as specified and as directed by engr-in-charge for room split/window type ac of capacity 2/1.5 tr., all as per item no: 3 above but gas r-32, all as per item no: 3 above but gas r-410a., all as per item no: 3 above but gas r-134a., taking out defective capacitor of capacity 50+6 mfd after disconnecting all incoming and outgoing electric connection including supply & fix new capacitor on same place and testing complete all as specified and as directed by engr-in-charge, all as per item no:7 here in above but of capacity 45+4 mfd ., all as per item no:7 here in above but of capacity 45 mfd ., all as per item no: 7 here in above but of capacity 6 mfd ., all as per item no: 7 here in above but of capacity 4 mfd ., supply & fixing as in replacement copper pipe 1/2" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 1/4" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 5/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 3/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply and fixing of insulation foam for copper pipe of size 1/2" after removing old one., supply and fixing of insulation foam for copper pipe of size 1/4" after removing old one., supply and fixing of insulation foam for copper pipe of size 5/8" after removing old one., supply and fixing of insulation foam for copper pipe of size 3/8" after removing old one., supply and fixing as in replacement of pvc flexible pipe 15 mm dia including any fittings as required complete inclusive of any type of leakage testing., all as per item no: 20 above but pipe of 20 mm dia., supply and fixing as in replacement of pvc water drain pipe 25 mm dia complete inclusive all fittings and any type of leakage testing., material and labour for sub main wiring with 2 x 2.5 sqmm +1 x 2.5 sqmm single core flame retardant pvc insulated unsheathed cable with stranded copper conductor drawn in and including heavy grade frlsh pvc concealed conduit isi marked with all accessories on walls and making good the disturbed surfaces including all conduits fittings, clamps guittes etc for earth dbs and boxes with proper thimbles all as directed by engr-in-charge. note :02 run of 2.5 sqmm , 01 run of 2.5 sqmm cable and 01 run of conduit shall be measured as one unit and paid accordingly., all as per item no: 23 here in above but of size 2x 4 sqmm +1x 4 sqmm., m&l cutting chases, pinning in stone concrete block or slab walls & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring ,etc., and making good, cutting exc. 10 cm girth., supply and fix as in replacement of rigid non-metallic pvc conduit of size 20

CTN :45705931

13 Jul, 2026 5.04 Lacs

Ananthapur - Andhra Pradesh

Tender For ame for supply of electrical materials to ttd kms in ananthapur dist of pertaining to esd-west, tirupati for the year 2026-27 - (7 to 9)w led, (8 +12) 4 way tpn db horizontal with ip 43, 12 nos, 0.5w led, 1 or 2 modular cover frame., 100 a to 160 a, 100a fp, 12 / 15 ms plain rod fan hook, 12 modular vertical cover frame., 12 way spn db with ip 43, dp incomer-1 no, sp mcbs -10 nos, 125a, 150 sqmmx 3.5 core, 16 sqmmx 4 core, 16a / 20a 1 way 1 module modular switch., 16a flush type socket with shutter, 16a flush type swich., 2.0 kw, 200a, 20a modular socket with shutter, 25 sqmmx 3.5 core, 250a to 350a, 3 core 2.5 sqmm, 3 core 4.0 sqmm, 3 modular cover frame., 3.0 kw, 36/0.3mm (2.5 sqmm), 4 core, 16 sq mm, 4 core, 2.5 sq mm, 4 core, 4.0 sq mm, 4 core, 6 sq mm, 4.0 sqmm, 400a, 40-63a dp mcb, 40-63a sp mcb, 40-63a, fp mcb, 40a 2 pole,30ma, 40a, 2 pole,100ma, 40a, 4 pole ,100ma, 5.0w led, 50 sqmmx 3.5 core, 56/0.3mm (4.0 sqmm), 6-32a dp mcb, 6-32a sp mcb, 6-32a, fp mcb, 63a fp, 63a, 2 pole,100ma, 63a, 4 pole,100ma, 6a / 10a 1 way 1 module modular switch., 6a / 10a 3/2 pin 2 module modular socket with shutter., 6a 1 way flush type swich., 6a 3/2 pin flush type socket with shutter., 6a triangle plug top of, 70 sqmmx 3.5 core, 8 modular horizontal / vertical cover frame., 84/0.3mm (6.0 sqmm), one module pvc blanking plate, stepped type electronic regulator, supply and fixing of anchor fastner with fan hook / providing ms fan hook with grouting and cement plastering, supply and fixing of isi marked ( is:4159) marked copper sheathed,nickle plated, mineral filled heating element including making connection testing etc as required, supply and transportation of following xlpe insulated, 1100v grade armoured alluminium cable as per specification confirming to is:7098 (part - i)./1554-i makes: torent / universal / unicab / havells / kei / gloster / polycab /rr kabel, supply of ,??... 10ka c/d curve isi mark. makes: legrand-dx3 / schneider-acti9/hager-h3/ siemens-5sx4/ crabtreexpro/l&t-au/indo asian-opti pro, supply of . lamp with input voltage 90 to 300v, colour temparature 3000k - 6500k, beam angle 170- 220 degrees, b22 base. makes: phillips/crompton/ bajaj/havells / halonix/gm/hplsyska/green lites/ fortune art / goldmedal /r led/luker/leo/orbit, supply of ?...pvc insulated and sheathed frls copper round cable for voltage up to 1100v as per is 694/1990. makes: finolex / rr kabel / havells /kei/polycab/gloster, supply of ?? category- i makes:legrand(myrius /lyncus)/ schneider(clipsal x/ livia ab)/ crabtree (murano/athena) / lauritz knudsen-englaze (formerly l&t)/ gm-(four-five)/ goldmedal(gifa)/million (m-vee)/anchor (roma plus) /precision (series7) / honeywell(blenzepro), supply of ??. 4 pole change over switch on load with open execution as per is:13947 makes: socomec / l & t / hpl / havells/ c&s, supply of ??... isolator. makes: legrand-dx3 / schneider-acti9/hager-h3/ siemens-5sx4/ crabtreexpro/l&t-au/indo asian-opti pro, supply of ??..hrc fuse links as per is 13703-part 2/iec 60269- part 2 makes: l & t / g e / c & s / standard / hpl / havells / siemens / indo asian, supply of ???.. rccb for earth leakage protection. makes: legrand-dx3 / schneider-acti9/hager-h3/ siemens-5sx4/ crabtreexpro/l&t-au/indo asian-opti pro, supply of ????. protection suitable for ????. s.p outgoings and for 1 no incomer etc., complete as per is 8623; is 13032; iec 61439-3. category- i makes: legrand(ekinox 3) / schneider-a9/hager -novello+/ seimens/havells stadx/ lauritz knudsen (formerly l&t)-newrange/indo asian-opti pro/ hpl (techno)/ anchor (uno plus), supply of ????.. makes: legrand arteor / schneider zen celo/ crabtree murano or amare/l&tenglaze/ gm-zenova/ goldmedal(gifa), supply of ??????... protection suitable for installation of ???of sp outgoing mcbs and for 1 no 4 pole, mcb/isolator incomer along with provision for 1 no of 4 pole rccb/elcb etc., complete as per is 8623; is 13032; iec 61439-3. category- i makes: l

CTN :45577318

01 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : e –tender for rate contract of consumable items to chhattisgarh medical services corporation ltd rna extraction for covid-19 (manual) vtm kit, salt testing kit alkaline paper electrophoresis, test kit, rapid plasma (rpr) for syphilis testing gluco test strip (2300 ordinary lancet, 2 gluco, meters having 4 pen devices preloaded with depth setting to be supplied free of cost with 2000 strips), rpr kit and syphilis vaccine carrier box rapid plasma regain (rpr) test kit, hepatitis b virus anti hbs elisa quantitative test kit ., mumps virus igm elisa qualitative test kit rubella virus igm elisa qualitative test kit vericella zoster virus-i igm elisa qualitative test kit, cytomegalo virus igm elisa qualitative test kit ., hsv (i and amp; ii) virus igm elisa qualitative test kit japanese encephalitis, virus igm elisa qualitative test kit measles virus igm qualitative, elisa test kit anti hev igm elisa qualitative test kit, rt-pcr kit with h1n1 assay set chikungunya virus igm, elisa qualitative i rota virus antigen elisa test kit, hcv pcr assay kit ready-to-use molecular detection kit for realtime, pcr based detection of hepatitis c virus dna. all necessary reagents optimized for reliable, hcv dna detection and quantitation, including genotypes a– h for in vitro diagnostic use`, hepatitis c virus anti hcv elisa quantitative test kit, hepatities c virustotal ab elisa test kit, anti hav igm elisa qualitative test kit, hbv kit ready-to-use molecular detection kit for real-time pcr based detection of hepatitis b virus dna. all necessary reagents optimized for reliable hbv dna detection and quantitation, including genotypes a–h for in vitro diagnostic use`, dna mini kit the kit should provide silicamembrane- based nucleic acid purification from tissues, swabs, csf, blood, body fluids, or washed cells from urine.the kit should not be based on mechanical homogenization of tissues, rather it should be based on enzymatic lysis of tissues., antibody (igm, igg) based rapid test for diagnosis of covid-19

CTN :45722423

20 Jul, 2026 NA

Vyara - Gujarat

Tender For supply of planetary mixer used for testing of cement and pozzolana (q3)

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

State Government

CTN :45705821

30 Jun, 2026 NA

Sirsa - Haryana

Tender For providing, lowering, laying, cutting (cut surface to be uniformly finished), jointing with rubber rings marked with is : 5382 and testing of spigot and socketted rcc, np2 marked with is : 458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete is all respects to the satisfaction to the engineer - in -charge. 4. 350 mm i/d ,`jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 cement sand mortar nearly dry heavily caulked into joints and with end dowels filled with 1:1 cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special , earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soil ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 3. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 40 mm nominal size),brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. cement mortar 1:6 (1 cement : 6 coarse sand), cement plaster (in fine sand) 12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

State Government

CTN :45704170

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

Rpr Test Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government

State Government