Latest rs joist Tenders | Government rs joist Tenders

corporations/Associations/Others

CTN :39126390

06 Feb, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of m.s. steel meltable,steel scrap r,s, joist

corporations/Associations/Others

CTN :39126420

06 Feb, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of 33 kv vcb scrap,copper scrap,guater pole scrap,guater pole scrap (no),ocb scrap,11 kv ocb scrap,11kv pilfer unit,st pole scrap (rail pole, joist pole),rs joist off size,rail pole scrap off size

corporations/Associations/Others

CTN :39126427

06 Feb, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of battery charger scrap,ups battery scrap 600 va scrap,ups battery scrap 3 kva scrap,33 kv vcb 1200 amp damage,t/f stamping (core scrap)tf core stamping core rusted,meter/meter box scrap , kwh meter s/p 5x20 a/kwh meter,steel scrap rail piecees,steel scrap rs joist,aluminium t/fs. coil (unburnt) scrap

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

CTN :38982857

30 Jan, 2025 5.43 Lacs

Thiruvananthapuram - Kerala

Tender For supply of materials for kalivilakam ward anganwadi construction - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), anjili wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, anjili wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), fine sand (zone iv), bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel screws 50 mm, mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, oxidised mild steel tower bolt (barrel type) 200x10 mm, oxidised mild steel screws 30 mm, oxidised mild steel handles 125 mm, oxidised mild steel screws 25 mm, brass 100 mm mortice latch and lock with 6 levers without pair of handles, pair anodised aluminium lever handles for 100 mm mortice latch and lock, 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish, 24 mm thick factory made shutters with styles, rails and panels of pvc extruded sections in white, grey or wooden finish, iron hooks & eyes 100 mm, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc bend 110 mm dia

corporations/Associations/Others

CTN :39001736

31 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For construction of plinth for 160 mva auto transformer - i with supports plinth for a-frame, radiators and cooling fans, transformer oil pipe lines and fire protection wall, modification of transformer gantry with rs joist and 'c' boom etc., construction of oil sump at kadaperi 230/110 kv ss.

corporations/Associations/Others

CTN :38731412

03 Feb, 2025 NA

Puruliya - West Bengal

Tender For corrigendum : tender for supply of steel materials from ms sail for unit 1 and unit 2 of 2x600 mw rtps dvc - ms plate 12 mm , ms plate 8mm , m s channel 100x50mm , ms plate 6 mm , hr sheet 3.15 mm , m.s.channel 150x75mm , plate mill plates sailhard , size- 16 mm , plate sail hard 12 mm , mill plate sail hard 20 mm , m.s.joist 200x100mm , joist is2062 e250a 250mm x 125mm , ms angles 75x75x8 mm , m.s. angles , size-100 x 100 x 10mm-is-2062abc-01and is-2062 e250a sk. , chequred plate 8mm , chequered platesis3502 , base is2062 , 6.000 mm x 1250.000 x 0 x 6300.000 , ms plate 40mm , m.s. angle 150x150x20mm , angle 150x150x20mm

CTN :39079774

06 Feb, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of m.s. plate 3 mm. thick, r.s. joist 250 x 125 mm. and r.s. joist 200 x 100 mm., as per is 2062 for unit iv & v esp and pa fan duct supportsnote :1. d.d. towards postal charges for obtaining enquiry by post shall be drawn in favour of se/p&a/ttps payable at tirunelveli.2. prospective bidders may get the specification free of cost by down loading from websites. tnpgcl www.tangedco.gov.innic https://tntenders.gov.in/nicgep/apptender opening (electronically) :o/o. the superintending engineer/p&a/ttps tuticorin.(executive engineer/mm/ttps)

CTN :39094453

25 Jan, 2025 NA

Patna - Bihar

Tender For supply of civil construction materials in rajgir zoo safari. - stainless steel sections of different sections , 304 grade , mild steel fe 500 grade tor steel conforming to related is codes and relevant bis/irc/morth&h specifications for reinforcement in rcc. (tata, sail,vizag or shyam steel only) , tmt fe500 -25 mm dia. , tmt fe500 -20 mm dia. , tmt fe500 -16 mm dia. , tmt fe500 -12 mm dia. , tmt fe500 -10 mm dia , tata / tiscon , tmt fe500 -8 mm dia. , civil construction materials , a) coarse sand (nardiganj sand) , b) local fine sand for filling , c) local good earth for filling in lawn & garden , graded stone aggregate conforming to is codes and relevant bis/irc/morth & h specifications (from domchach) , a) 20 mm nominal size (from domchach) , b) 10 mm nominal size (from domchach) , designation 100 a bricks conforming to is codes and relevant bis/irc/morth & h specifications , fly ash bricks conforming to is codes and relevant bis/irc/morth & h specifications , ordinary portland cement (o.p.c. 43 grade) of ultratech, ultratech premimum, acc, lafarge only. , portland pozzolana cement (p.p.c) of ultratech, ultratech premimum, acc, lafarge only. , portland slag cement (p.s.c.) of ultratech, ultratech premimum, acc, lafarge only. , kota stone 600 mm x 600 mm x 30 mm , kota stone 300 mm x 300 mm x 30 mm , vitrified floortiles 800 mm x 800 mm (kajaria/johnson/somani/nitco) , vitrified tiles 600 mm x 600 mm (kajaria/johnson/somani/nitco) , ceramic floor tiles 300 mm x 300 mm (kajaria/johnson/somani/nitco) , ceramic wall tiles 300 mm x 300 mm x 10 mm (kajaria/johnson/somani/nitco) , 18 mm thick polished granite stone , z-black polished rajsthan , z-black flame finish rajsthan , ms structural steel sections i/e flat, angle, tee, i section, h-section, z-section, square-section bar etc. steel joist, steel channel, steel angles, steel flats and square bars etc. (conforming to is codes and relevant bis/irc/morth&h specifications) (tata, sail,vizag or shyam steel only) , mild steel hollow tubes (mild steel hollow sections conforming to is codes and relevant bis/irc/morth & h specifications) (tata, sail,vizag or shyam steel only) , interlocking c.c.( cement concrete) white paver , 80 mm thick m35 grade tested, 60 mm thick m35 grade tested, interlocking c.c.( cement concrete) coloured paver , 80 mm thick m35 grade tested, 60 mm thick m35 grade tested, moorum 5 to 10 mm koderma, gsb grade-1 , colour coated profile sheet , 0.50 mm (+0.05%) tata, wall putti jk/ birla, cement primer asian paint/ burger paint /nerolac and equivalent brand, premium acrylic smooth exterier paint , plastic emulsion paint , enamel paint

State Government

CTN :39065375

13 Feb, 2025 28.43 Crore

Bhopal - Madhya Pradesh

Tender For rate contract for supply of steel supports (r.s. joist, h beams,wpb) and steel section (ms channel, ms angle, flat) for a period of one year

Rs Joist Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government