Latest rubber seat Tenders | Government rubber seat Tenders

CTN :38520797

30 Dec, 2024 NA

Indore - Madhya Pradesh

Tender For supply of plastic chair tip up seat which is spring free with a gravity tip-up seat width 450mm, depth-460mm

CTN :38556439

02 Jan, 2025 NA

Daman - Gujarat

Tender For supply of furniture - rack adjustable 6 tier steel , bath stool pvc , chair easy , chair writing , peg table , receptacle pvc , sofa chair with cushion one seat , table bed side , table center , table writing , table dressing gents , almirah medium with shelves , almirah steel large with shelves , book case open small , chair dining with long back , chair easy cushioned , chair verandiah , chair writing steen , hat stand with mirror , hot case small , magazine rack medium , notice board , safe meat and milk small , side board small 1200x455x760mm , sofa set 5 seater with cusion , stool dressing cushioned , table dining 8 person 6 ft x4 ft , table cook house , table dressing ladies , table pantry medium , table office clk steel , teapoy 600x450x540mm , teapoy varandha , table card 900x900x600mm , chair cba spl with hand rest , table center two tier , form with back , receptacle small , table stainless steel top 1670x760x750mm , stool revolving adjustable , stool 2 feet hight , bed steel iron hospital , locker steel 4 unit , chair cb steel , bed hard 1980x900x660mm , rack steel adjustable , charpoy gi with plywood top , table writing medium , teapoy wooden , table 3x2 inch with drawer , chair plastic mouled with arms and with cusuhned ornate , table 3x2 without drawer 900x600x760mm , receptacle large with bucket , table dining 6 person , safe milk , hot case large , foam with back , receptacle , chair dining , table cook house terrazzo top , chair writing 950mm high 500mm wide , table 2x2 with drawer , rack steel 1830x760x1905 mm bid number/ ( ( ) ): gem/2024/b/5658031 dated/* : 12-12-2024 bid document/ 1 1 / 49

CTN :38555911

03 Jan, 2025 NA

Jalandhar - Punjab

Tender For tender for supply of cusion with cover 21inchx22inchx4inch , cover for cushion 550x525x100mm , seat cushioned foam 21inchx22inchx4inch 40 density , cushion seat with rexine cover for chair dining cushion , leg of charpoy gi pipe 32mm and 408mm length duly threaded at one end , cushion back with rexine cover for chair easy cushion as per fd-358 , cushion seat with rexine cover for chair wrting cushion as per fd-1107 , cushion back with rexine cover for chair wrting cushion as per fd-1107 , cusion with cover for stool dressing lades (map) as per fd/map-ii/07. , pvc seat and back for chair varandah fd/map-ii/06 , back for chair steel made of shesham and duly canned by 2mm half round plastic cane 4mm (ref drg fd-75(m) , plywood 8inchx4inchx12mm one side teakface , plywood teakface 8inchx4inchx6mm , long rail gi 32mm for gi chorpoy size 2 mtrs long both side duly threaded , tape newar nylon 50mm wide. , plywood 8inchx4inchx9mm thick bwr commercial , short rail gi 32mm for gi chorpoy size 900 mm long both side duly threaded , plywood bwr commercial 8inchx4inchx12mm , plywood 8inchx4inchx4mm one side teak face , plywood 6feetx4feetx19mm , plywood 7feetx3feetx12mm , plb 2400 x 1200 mm x19mm , lakh dana , handle cp for almirah steel 100mm , gi tubing 32mm , pvc seat for chair dining make amko as per fd/map-ii/05 , handle ss for locker steel , plywood commercial 8feetx3feetx19mm , light siller (nc sanding) , plywood 8feetx4feetx4mm , pre laminated particle board 2.75x1.83x18mm thick , shocker (hydraulic spindle) for chair revolving , pvc shoe for chair with screw as per sample. , gi elbow 32 mm 3 way , paint white enamel , handle for table bed side , lock 50mm for almirah med steel , touch wood , plywood 6feetx4feetx9mm , spirit dentured best quality , lock for almirah steel medium 75mm , pvc base for chair revolving with wheel , bwr plywood 1800x1200mmx12mm , paint synthetic enamel olive green , fevicol sh , lock for steel almirah large 77mm , telescopic channel 14inch long , turpentine oil , thinner , telescopic channel 8inch long , fevicol sr , pvc bush for chair visitor , french polish , hessian cloth 48inch wide clossly woven , cloth malmal , mr plywood 2400 x 1200 x 6mm , teakwood beading 6mm thick 18mm wide , paint synthetic enamel black , palmet patti , asian paints liquid varnishes or shellac varnish , screw wood 35mm (gypsum) (100nos/pkt) , screw wood steel 50mm (gypsum) , bwr plywood 1800x900mmx12mm , screw wood 45mm (100nos/pkt) (gypsum) , paint se smoke grey , paint brush 75mm , paint brush 50mm , looking mirror for table dressing gents760x380x5mm , knob fancy in teak shade , emery paper no-120 , screw wood steel 40mm (gypsum) , wooden scantling 75x25x2000mm long , nails wire 75mm , hasp & staple cp 2inch , nails wire 32mm (headless) , screw 75mm , pvc arms for chair visitor , emery paper no-100 , paint brush 25mm , teakwood beading 4mm thick 18mm wide , bow handle aluminium 100mm , nails wire 20mm , nails wire 50mm 14 no , screw wood steel 65mm (gypsum) , screw wood steel 25mm(100nos) (gypsum) , nails wire 1/2inch head less 18 no , nails wire 50mm , nails wire 40mm 14 no , nails wire 100mm 14 no , screw wood steel 30mm (philips head)

CTN :38519018

31 Dec, 2024 NA

Bareilly - Uttar Pradesh

Tender For supply of genr set 30 kva engine overhualing and repair of panel board and other issues , genr set 30 kva replace of mounting chassis and armature fixing , genr set 35 kva engine overhualing and repair of panel board and other issues , genr set 3 kva engine overhualing and other issues , genr spares i e fuel filter oil filter air filter fan belt exhaust fan mounting pad etc , canopy repair , armature rewinding , armature cooling fan , bty 12 v 130 ah , bty 12 v 90 ah , bty 12 v 65 ah , bty 12 v 9 ah , avr green , self starter solenoid , armature for self starter , alternater for bty charge , fuel feed pump , carburetor , wall mixer hot and cold single lever make jaguar , piller cock 15 mm hot and clod single lever make jaguar , angle cock 15 mm make jaguar , water pump 0 point 5 hp online make crompton , bath mat of size of 10 x 5 long , concealed ceiling round led light 18 w 9 x 9 , washbasin waste pipe , urinal wast pipe , door handle as per sample , mortice lock 4 lever with handle , exhaust fan of size 6 inch , electric gyser cap 3 ltrs , vitourios china wash hand basin with complete accessories , jet spray for toilet seat , looking mirror , waterproof fire retardant tarpaulin of minimum size 30 x 30 isi marked , celing led light 200 x 200m 18w , acp panel as per sample , hydraulic oil , plywood 8 x 4 x 19mm , godrej interio plastic pulse aero mesh back office chair with adjustable arm rests synchro mechanism black , fevicol sr , nails 1 or 2 1 1 point 5 2 , paint brown green white chocolate golden cream and black , synthetic camonet desert pattern size of 11m x 16m , repairing and service of ac , 1 square pipe 20 long , 1 point 25 square pipe 20 long , cement , sand , aggregate 20mm , brick , tiles 2x4 , tiles 2x2 , steel bar , water profing , white cement , wall tiles area 360 1x1 bid number/ ( ( ) ): gem/2024/b/5677467 dated/* : 10-12-2024 bid document/ 1 1 / 42

CTN :38525393

24 Dec, 2024 5.00 Lacs

Burhanpur - Madhya Pradesh

Tender For purchasing stationery - a/4 size paper b2b, register 1 set full size, register 2 set full size, register 3 set full size, register 4 set full size, register 5 set full size, glue bottle 300 ml, file cover super nagar nigam burhanpur printing tax, tags small, tags big, a/5 size paper, stamp pad medium, highlighter pen, ol pin, carbon single, carbon double single, stapler small, stapler big, stapler pin small, stapler pin big, dapati bandi pad, calculator, plastic folder, plastic folder button, flag strip, checking pencil (red,black), audit pencil (brown), plain pencil, marker, highlighter, white cello tape 1'', white cello tape 2'', white cello tape 3'', yellow a/4 envelopes, spunch dobby, tocha, pen 10,20,30,40,50 high, brown cover file municipal corporation burhanpur soil tax, box file, favesteak, paper weight, pen stand, rubber band kg, blue ink 100 ml, red ink 100 ml, shopner, table top glass, white board 4/3, punching machine, duster, compass, sketch pen big ones, sticker seat ?4 size, shellac

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

CTN :38518697

30 Dec, 2024 NA

Patiala - Punjab

Tender For supply of frp based multi play stn with installation , frp swing with chain seat plastic coated , cgi shed , spring rider with installation , frp slide , bush cutter machine , led light 24 watt for street

CTN :38533227

31 Dec, 2024 NA

Jalandhar - Punjab

Tender For supply of flex with frame three x two,umbrella large,red cloth,combat cloth,iron pipe,table glass three x two,mattress 2 inch,mattress 1.25 inch,mattress 5 inch,tentage lamp,face mirror,male female,male plug,bed switch,hand towel,service wire,tea thermous 5 ltr,tea thermous 10 ltr,hanger,tray medium,plastic bucket large,double bed mosquitoes net,bat fly killer,ply 6x4,comb set,comb set round,big towel,torch,clip bd,remote bell,borosil glass,5amp sw bd,5amp plug,nurimik pipe,seat beats,tea thermous 1 ltr,shower curtain,bed sheet double bed,towel set one big and one small

CTN :38525585

08 Jan, 2025 15.62 Lacs

Gwalior - Madhya Pradesh

Tender For purchase of gym equipment file no. 106/24x2/10 - ac motor - 4.5hp/8hpspeed - 1.0-22.0 kmphincline - 0-20% automaticrunning area - 1620x600 mm, 65x24 inch (approx)user weight - 200kg max, fly wheel - 20kg fly wheelsteel wheel - transportation wheel for easy transportuser weight - 150kg max, fly wheel - 18kg fly wheelbrake - fiction breaking system & emergency locksaddle - horizontally & vertically adjustiblehandle bar - vertically adjustable user weight - 150 kg max, square tube - 50x100mmweight stacks - 40 kgnw/gw 60 kg/ 66 kg, minimum size - 1570x660x700 mmcaps - all caps are in round metalnw/gw - 21.2kg/22.6kg, monitor - time speed distance calories ressistance - wind resistance rowing machines with 10 levels adjustment machine size - 2350x630x360 mmuser weight - 230 kg maxnw/gw 31kg/37kg, frame size - 50x70 mm squareweight stack - 110lbs x 4 (440lbs) plastic coating weight (pvc) plates & cast cement insidemachine - high density upholstered seat & back pads high intensity navigation durable wire steel with 6 mm diameter, tube - high strength steel tube precision weld cable - internally lubricated cable 6 mm square tube 50x100 mm (2.5 mm thickness) cover - with both side full metal seat cushion - 65mm thickness caps - all caps should be in metal size - 1650x1030x1630 mm weight stack - 110kg (steel) nw/gw - 257kg/291kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thickness) seat cushion - 65mm thickness, caps - all caps should be metal, size - 1500x710x990 mm, type - plate loaded machine, nw/gw - 52kg/63.6kg, tube - high strength steel tube precision weld, cable - internally lubricated cable 6 mm, coating - two round powder coating, square tube - 50x100mm, thickness - 2.5mm, size - 1140x940x1370mm, weight stack - 100 kg (steel), machine weight - 190 kg, tube - high strength tube precision weld, machine - high quality functional trainer, coating - two round powder coating, type - fully commercial, cable - 6 mm, weight stack - 100x2 kg, machine weight - 350 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube 50x100 mm (2.5mm thick), size - 1400x680x420 mm bench weight - 30 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100 mm (2.5mm thick), size - 1650x680x1000mm nw/gw - 40kg/46.2kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1060x680x1000mm nw/gw - 21kg/24.8kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1380x680x690mm nw/gw - 34kg/40kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1320x840x970mm , bench weight - 75 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1800x600x800mm , bench weight - 115 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thick), size - 1500x700x100mm, rack weight -75 kg, frame tube - flat oval 50x100x2.5t, square tube - 50x2.5t, cushion 1 - 895x360x55mm, cushion 2 - 455x205x55mm, cushion 3 - 550x520x55mm, cushion 4 - 454x408x55mm , cushion 5 - 250x140x80mm, size - 225x1357x1385mm, type - plate loaded machine, nw/gw - 259kg/298kg, frame tube - rectangular tube 50x80x2.5t, size - 1995x1910x2350mm, weight stack - 80x2 = 160 kg, net weight - 360 kg, size - 2.5kg, 5kg, 7.5kg, 10kg, 12.5kg, 15kg, 17.5kg, 20kg, 22.5kg, 25kg, 30kg, size - 10kg, size - 7.5kg, 10kg, 12.5kg, 15 kg, size - 3feet, 4feet, 5feet, 6feet, size - 3feet, 4feet, size - 18 inch, tricep handle, tricep rope, rod stand, size - 1kg, 2kg, thickness - 38mm, length - 15m, curl rod olympic 3 4, pushup stand, olympic weight dead lifting, skipping rope, pencil rop

Central Government/Public Sector

CTN :38492497

27 Dec, 2024 41.80 Lacs

Gandhinagar - Gujarat

Tender For provn of furniture for 08 offrs 56 jcos/ors md accn at mil stn dharangdhra - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07)dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mmh.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs. make-amko or equivalent, bin linen multipurpose with ironing board(fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg., chair dining fd/map-ii/04 (fd/map-ii/04)dimension: overall size shall be 450mm wide x450mm deep and 950 mm height ,450mm high up to seat. description:- (a) all wood to be usd shall be 1st clas hard teak wood (b) the seat of chair shalll be made of 40 density foamcushion having thickness 75mm. the cushion shall be placed and pasted on 12mm bwr plywood as per size of seat duly covered with approved tapestry cloth of rate not less than450mm per mtr. the seat shall be be fixed over the rails and screwed from wood stopper with 30mm long screws.(c) pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. rest all specification and dimensions are as per drg. finish:- the chair shall be be polished in high gloss melamine polishin walnut shade after preparation of surfaces., hat stand with mirror large (fd-233)dimension:overall size shall be 1330 mm long, 710mm high.description:the inner frame shall be of 50mmx20mm teak wood battens six in nos .the back and front of frame shall be covered with 6mm thick commercial ply.the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,modiguard/atul) shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand.finish: all teak wood surfaces shall be given high gloss french polish with lacquer finish. all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drgs, peg table (fd-384)dimension; overall size shall be 450mm long,300mm wide and 380mm high.description: legs shall be of teak wood of section 30mmx50mm.the legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.two bottom rails of size 20mmx40mm shall be fixed between the legs .a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.top of the table shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table.finish: all wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.rest all as per drg., receptacle pvc small (fd/e6/map/13)dimension/capacity:-the receptacle shall be of capacity 20 ltrsdescription:the body of receptacle pvc shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided with swivel lid a

Rubber Seat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector