Latest scaffolding Tenders | Government scaffolding Tenders

State Government

CTN :38727310

06 Jan, 2025 9.90 Lacs

Alwar - Rajasthan

Tender For supply and fixingopen gym equipment - providing and fixing cross trainer including fitting and fixtures, civil works and required sand pit filled with approved sand work to be done as per the instruction of engineer incharge and specification given belowdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from b class g.i. pipe of different nb. the main frame pipes are of 80nb b class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of 250 mm & 10mm thick. the handle frame is made up of 25nb b class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb b class welded with m.s. round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness.seats, footrests, and endcaps are composed of high-quality lldpe material (anti-uv). anchor fasteners are m10/m12, sbr rubber grips, and bearings are made of ss 304 from skf or an equivalent brand.to build structure bushes are used which are made from m.s.seamless pipe of 60mm od. with 5 mm thickness. the footrests are made from aluminum casting material of size 130 mm x 310mmx5mm thickness and mounted on m.s. plate of size 130mm x 310mm x 3mm thick closing caps are made up of high quality fiber reinforced plastic material. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright . the bearings used are of 6007zz 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly., providing and fixing seated pullar including fitting and fixtures, civil works and required sand pit filled with approved sand work to be done as per the instruction of engineer incharge and specification given belowdimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtrseated puller equipment made up of b class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters the center pipe is of 100nb made from b class g.i. pipe.bottom support is of m.s. round plate of 250 mm & 10mm thickness is welded. all linkages are made up of 25nb b class g.i. pipe.the handle frame is of 32nb b class g.i. pipe.the seat frame is of 32nb b class g.i. pipe, to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush is used.the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb b class. welded with m.s. round plate of 250 mm & 10mm thick. main pipesupported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness.foundation cover closing cap is made from frp material with 0.7 mm thickness. the seats and back rests are fitted on the outer frames are made up of m.s.sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.seats, footrests, and endcaps are composed of high-quality lldpe material (anti-uv). anchor fasteners are m10/m12, sbr rubber grips, and bearings are made of ss 304 from skf or an equivalent brand.closing caps are made up of high quality fiber reinforced plastic material., providing and fixing rower including fitting and fixtures, civil worksand required sand pit filled with approved sand work to be done as per the instruction of engineer incharge and specification given below dimensions: - 1200mm (length) x 1000mm (width) x 920mm. (height) safe area: - 1.5mtr. x 1.5mtr.rower equipment made from b class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimetersthe main frame is of 80nb b class g.i.. pipe welded with m.s. round plate of 250mm x 10mm.the handle frame 25nb is made from b class g.i. pipe.the fo

Central Government / Public Sector

CTN :38652064

08 Jan, 2025 1.90 Crore

Bongaigaon - Assam

Tender For corrigendum : providing of custom bid for services - rate contract for scaffolding works at iocl bongaigaon refinery

State Government

CTN :38697954

07 Jan, 2025 11.29 Lacs

Ukai - Gujarat

Tender For dismantling, fabrication, erection of displaced bronze bush of trunnion at its original working position for radial gate no.10 in right side trunnion and gate no.22 in left side trunnion and fixed support of end pier for hoist its ismb, ms plate, ms shaft with pulley etc for radial gate no 1 and 2 its intermediate pier main spill way of ukai dam (gate size 51 x 48.5) with all accessories inclusive of labour, scaffolding, tools and tackles etc. complete as per specification.

State Government

CTN :38819876

17 Jan, 2025 1.38 Crore

Ambikapur - Chhattisgarh

Tender For construction, testing and commissioning of r.c.c. elevated service reservoir of 01 nos 40kl & 15m staging and remaining work of 3 nos 40kl & 15m staging including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber&providing, laying, jointing, interconnection, testing and commissioning of 63 mm dia to 90 mm hdpe pe-100 , pn-6 pipe & 90 mm dia to 110 mm dia upvc class 6/10 kg/sqcm with suitable joints & 50mm to 100 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single and three phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss/nylon wire rope and connection cable including verification of tubewell yield & electric connection from cseb, construction of rcc structure brick masonry 2nos- brick masonry switch room of size 1.50*1.50*2.50 mtr and 3 nos masonry switch room of size 2.50*2.50*3.00 mtr & construction of boundry wall near oht providing 270 nos functional household tap connection(f.h.t.c) in individual households etc. complete with trial run operation & maintanance for 06 months under retrofitting of piped water supply scheme under jal jeevan mission for village-aamatoli, block- sitapur .district surguja (c.g.). total length-2506 meter

State Government

CTN :38814006

06 Jan, 2025 NA

Sirmour - Himachal Pradesh

Tender For enquiry for sealing of draft tube gates and making of scaffolding inside draft tube of unit no. 1 for inspection of throat ring at 3x105 mw sirmour.

Central Government/Public Sector

CTN :38802265

21 Jan, 2025 30.48 Lacs

Murshidabad - West Bengal

Tender For supply of farakka scaffolding items m6236206006 , m6200007057 , m4520100117 , m1776210404 , m6200007081 , m6200007038 , m6236376001

Central Government/Public Sector

CTN :38601925

11 Jan, 2025 NA

Barh - Bihar

Tender For corrigendum : supply of scaffolding sprare-00010 - m6200007029, specification, workshop_common,on basis of ntpc drg / specs, part name : cuplock ledger, additional information : duty class:medium, dimension : 40 x lg 3000 mm, center to center of two vertical,actual size:2950 mm,outer diameter:48.3 mm,steel tube, manufactured as per is:1161 standard, 00020 - m6200007070, specification, workshop_common,on basis of ntpc drg / specs, part name : cuplock, additional information : duty class:heavy,size:2500 mm, dimension : 40 mm, type:vertical or standard,outer diameter:48.3 mm,steel tube manufactured as per, is:1161 standards, 00030 - m6200007069, specification, workshop_common,on basis of ntpc drg / specs, part name : cuplock, additional information : duty class:heavy,size:2000 mm, dimension : 40 mm, type:vertical or standard,outer diameter:48.3 mm,steel tube manufactured as per, is:1161 standards, 00040 - m6200007024, specification, workshop_common,on basis of ntpc drg / specs, part name : cuplock ledger, additional information : duty class:medium, dimension : 40 x lg 1500 mm, center to center of two vertical,actual size:1450 mm,outer diameter:48.3 mm,steel tube, manufactured as per is:1161 standard, 00050 - m6200007026, specification, workshop_common,on basis of ntpc drg / specs, part name : cuplock ledger, additional information : duty class:medium, dimension : 40 x lg 1675 mm, center to center of two vertical,actual size:1625 mm,outer diameter:48.3 mm,steel tube, manufactured as per is:1161 standard, 00060 - m6200007072, specification, workshop_common,on basis of ntpc drg / specs, part name : cuplock, additional information : duty class:heavy,size:3000 mm, dimension : 40 mm, type:vertical or standard,, outer diameter:48.3 mm., steel tube manufactured as per is:1161 standards, 00070 - m6200007077, specification, workshop_common,on basis of ntpc drg / specs, part name : inclined stairway, dimension : 2500 x 2000 mm, bsl fixed staircase,9 steps without landing.both sides railing (500mm wide), 00080 - m6236900530, specification, workshop equipment., part name : swival face brace, dimension : 2000 x 2000 mm, additional information : size:2828 mm, 00090 - m6200007067, specification, workshop_common,on basis of ntpc drg / specs, part name : cuplock, additional information : duty class:heavy,size:1250 mm, dimension : 40 mm, type:vertical or standard,outer diameter:48.3 mm,steel tube manufactured as per, is:1161 standards, 00100 - m6200007074, specification, workshop_common,on basis of ntpc drg / specs, part name : fixed ladder, dimension : wd 650 x 2500 x 2000 mm, 9 steps without landing, 00110 - m6236400001, specification, "workshop equipment., part name :swivel brace, dimension :2500 x 2000 m, duty:medium", 00120 - m6200007078, specification, workshop_common,on basis of ntpc drg / specs, part name : right angle coupler, additional information : electroplated, dimension : 40 x 40 mm, for tube 40 nb,, outer dia:48.3 x 48.3 mm, 00130 - m6200007101, specification, workshop_common,on basis of ntpc drg / specs, part name : swivel coupler, additional information : electroplated, dimension : 40 x 40 mm, for tube,forged, , -for pr 100241609 barh -

Central Government/Public Sector

CTN :38601892

11 Jan, 2025 53.56 Lacs

Nagpur - Maharashtra

Tender For corrigendum : supply of scaffolding spares pr 100246264 mouda cuplock ledger, cuplock ledger, scaffold board, scaffold board, diagonal bracing tube, fixed ladder, railing tube

Private Sector

CTN :38743568

08 Jan, 2025 NA

Mumbai - Maharashtra

Tender For ola for scaffolding services required for trombay thermal power plant and housing colony at trombay for period of 2 years

corporations/Associations/Others

CTN :38709304

07 Jan, 2025 6.41 Lacs

Mehsana - Gujarat

Tender For labour charges for cleaning of rcc esr and under ground sump cleaning and removing algae calcinations, sludge, dirt deposition from bottom and as well as from wall of container,dis infection by chlorine and bleaching powder with necessary scaffolding tools and plants, labours and disinfectant etc complete.

Scaffolding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors