Latest sealing sleeve Tenders | Government sealing sleeve Tenders

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

CTN :38589255

24 Dec, 2024 2.50 Lacs

Madurai - Tamil Nadu

Tender For supply of gasket rocker cover,gasket air intake mf,gasket exh manifold,cylinder head gasket,inlet valve seat,exhaust valve seat,valve stem seal,exhaust valve,inlet valve,cap brass,valve guide,cyl liner neck rolled,oring liner,piston rings,sump gasket,rocker cover bolt,hose,exhaust bellow,gasket,over flow hose,diesel line hose,oring he,oring,gasket turbo holset,bolt nut,con rod bearing,lub oil filter,diesel filter primary,diesel filter secondary,coolant additive,primary element af,secondary element af,hose clip,starter,water pump,oil pump,starter ring gear,oil seal,oil seals,crankshaft sleeve,hose,hose,kit pistonpin circlips,exhaust valve,inlet valve,packing and forwarding charges,cylinder head repairing charges,nozzle calibration charges

CTN :38554742

02 Jan, 2025 NA

Bardhaman - West Bengal

Tender For supply of pump spares for mines - journal bearing top and bottom de and nde , gland , shaft sleeve de bronze , shaft sleeve nde br.27 , oil ring bearing with oil ring , shaft sleeve ds , shaft sleeve nde , split gland bush , set of two gland, brass , set of two bearing bushes, lb-2 , pair of sleeve, lg-2 , set of 2 gland , set of two bearing bushes , pair of sleeve , impeller , bush bearing de

Central Government/Public Sector

CTN :38532512

01 Jan, 2025 1.16 Lacs

Uttara Kannada - Karnataka

Tender For supply of filter cartridge x593202000040,oil filter 0031845301,hoe clamp 203017000104,hoe clamp 203017000103,ring carrier x00010415,sealing sleeve x53220200002,sleeve 0009922129

CTN :38507594

28 Dec, 2024 NA

Bangalore - Karnataka

Tender For supply of wiring harness of scania battery main switch cable - pvc connector square white colour 12 slot with 11 socket type female copper terminal double splitter 3 point 5 mm dia silver coated as per , pvc connector rectangular white colour 02 slots with 02 pin type male copper terminal double splitter 3 point 8 mm dia silver coated as per , aluminium alloy connector with olive drab chromate over cadmium plate neoprane impregnated 2 socket type 4 dia female silver coated , electrical cable copper conductor pvc insulated dc wire single core grey 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core green 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core violet 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core blue 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core brown 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core yellow 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core red 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core white 01 sq mm , electrical cable copper conductor pvc insulated dc wire single core black 01 sq mm , brass ring tongue terminal solder type tin coated for 01 sq mm cable 5 point 4 mm id x 0 point 8 mm thk , brass ring tongue terminal solder type tin coated for 01 sq mm cable 6 point 5 mm id x 01 mm thk , brass ring tongue terminal solder type tin coated for 01 sq mm cable 8 point 5 mm id x 01 mm thk , snap terminal double splitter copper silver coated with clear pvc jacketed 08 mm as per sample , boot heat shrinkable strain relief with meltable inner wall for adhesive right angle boot repl hsr_r_22 by 11 as per sample , hs sleeve black 6 by3 mm , hs sleeve black 8 by4 mm , insulating sleeve pvc white 30 mm dia , insulating sleeve pvc white 12 mm dia , insulating sleeve pvc black 24 mm dia , insulating sleeve pvc white 18 mm dia , insulating sleeve pvc white 10 mm dia , insulating sleeve pvc white 16 mm dia , insulating sleeve pvc white 6 mm dia , insulating sleeve pvc yellow 2 point 6 mm dia , insulation tape pvc black 18 mm width , surgical tape adhesive tape usp leukoplast 20 mm width , cable nylon tie black 150 mm long , adhesive fevi quick 20 point ml tube , plastic cover 80 microns size 18 x 24 , permanent marker pen black bid details/ 2 / 33

corporations/Associations/Others

CTN :38329893

19 Dec, 2024 1.83 Crore

Multi City - Karnataka

Tender For corrigendum : supply of the of gear & gear parts to nwkrtc. - dowling pin , carrier, assbly drum shaft 8.47, eicher plate holding, eicher rail gear shaft rev, eicher reverse jaw, eicher jaw gear shaft - 1, eicher rail 5/6, eicher rail 3/4, eicher jaw gear shaft, eicher assembly pin spring, eicher circlip, eicher cylinder roller brg, eicher o ring, eicher shaft, eicher washer rev idler, eicher 5th ms brg, eicher split pin, eicher bs-iii poppet terra 25, eicher bs-iii o ring , eicher bs-iii bushing shaft, eicher bs-iii bush cross shaft, eicher bs-iii pin lock for mini tower, eicher bs-iii selector lever, tata assembly housing block, m s 3rd gear , selector shaft - 3, selector shaft - 2, needle bush, spherical washer, thrust washer crown pinion, crown pinion set eicher, ball joint assembly rh, sub assembly ball joint - 2, selector pin, washer 4th/5th - 1, gear shifter milling bs-4 tc, sub assembly ball joint - 1, sub assembly ball joint, circlip crown, ball steel eicher, clutch relaser shaft, assembly case upper eicher, shim upper , washer g/s upper, thrust washer rev gear, eicher sensor ring, washer 4th/5th, eicher cone synchronisercro, gear change finger - 1, circlip kii, diff spider kit, companion flange , output flange, circlip - 5, spring pin - 1, synchroniser hub, lower pin ball terra, synchroniser assembly, poppet, circlip - 4, shifter shaft, selector and shifter shaft (rhd), assembly selector shifter fork with gear shifting lever, selector and shifter yoke, circlip - 3, circlip - 2, circlip - 1, circlip - 6, selector shaft - 1, s/a of detent plunger, gear side diff - 1, crown wheel pinion, crown wheel pinion - 1, ball joint r.h. - 2, upper pin ball terra, block terra, ring terra, ball terra, spring terra, poppet terra, inner fing terra, spring 2nd/3rd synchroniserchro, fork wear pad, gear box lock kit, bearing sleeve 4th/6th speed, synchroniser kit - 1, shifter shaft 1st/2nd - 1, shifter shaft 1st/2nd, clutch cone terra, detent spring, needle bush for gear lever kit, shifter shaft (3rd/4th speed) midi, circlip for 5th gear, circlip for 4th gear, circlip for 3rd gear, od selector plate, ms 4 gear bs-iv, fork, 2ndand3rd gear shift et40s6 , counter shaft for 6th gear (od gear) 6.71 ratio (et70s6) , constant mesh gear (6th gcs) 7.33 ratio (et70s6) , gear reverse idler , synchroniser ring - 1, clutch body ring terra 25 , bearing sleeve 5th gear et70s6 , reverse gear main shaft - 1, synchroniser hub , sleeve synchroniser 4th/ 5th , synchroniser hub 1st/2nd , synchroniser hub 2nd-3rd (hcv) , sleeve 2nd-3rd synchroniserchro (hcv), gear assemblynchroniser 6th (od) et 70s6 (6.71 ratio) , detent pin , lever, cross shaft bs-iii, od fork assembly-et70s6, synchroniser sleeve, synchroniser ring, circlip 2.2 thick, selector cable assembly, shifter cable assembly, circlip-2.5 thick, ball joint for gear shifter cable, spacer - 3, cross shaft, od gear on ms 21 teeth, drive assembly 6th gms, circlip 30, dp assembly 6.71 ratio, extended outer lever, ball joint, lever cross shaft srgsl, nut main shaft m30x1.5, brass pad midi, circlip 55 gb eicher, thrust washer 2nd gear, circlip 2.03 gb midi, service kit bushing, gmset 70s6 3rd, bearing sleeve 2nd gear, brg sleeve 2nd gms, thrust washer iii-iv gear, main shaft, assembly 4th 5th synchroniser sleeve, sleeve synchroniser, synchroniser assembly 2nd/3rd, synchronising assembly 1st/2nd, main shaft 2nd gear , main shaft 1st gear , nut main shaft m36x1.5, threaded pin gb60, synchronising ring (5th speed), fork gear shift 1st and 2nd, fork reverse et70s6 , main shaft 4th gear - 1, ball synchroniser, clutch body ring ring (hcv), driver pinion, main shaft 4th gear, counter shaft, c/s 4th gear, idler differancial, synchroniser repair kit, circlip kit - 1, assembly housing block - 1, brass pad, compression sparing bs-iii, shifter shaft 3/4th, spring pin, shifter fork 1/2/3/4 speed, shifter fork 1/2/3/4 speed - 1, assembly detend, forth speed gear - 1, constant mesh gear c/shaft - 1, oil slinger, roller

CTN :38473985

27 Dec, 2024 NA

Bangalore - Karnataka

Tender For supply of add relay box qty 02 nos - aluminium alloy connector angular piug with olive drab chromate over cadmium plated with brass tin coated bush upper and lower for shell size 28 comma with protective cap _2rtt 32kue 10sh15v , electrical cable copper multi strands tin coated plasticized pvc insulated white over varnished cotton yarn braiding _7 x 0 37mm comma 0 75 sq mm comma spec 911 , copper tinned braid_10 x 16 mm , insulating sleeve pvc white_3mm dia , insulating sleeve pvc white_12mm dia , heat shrink tube clear_10 x 20 mm , insulation tape pvc black_19mm width , locking wire steel_0 5mm dia , nylon thread white_0 5 mm dia , cosmo sleeve varnish_ , iso prophyle alcohal_ ipa , potting compound_ana bond 909 , solder soft 16 swg_sn 63 percent comma pb 37 percent , solder flux_ , aluminium clad sheet 0 5 mm thk_is is to 737 900x240 mm , plastic cover clear 80micromes _18 inches x 18 inches , permanent marker pen black_no 1523

CTN :38473933

27 Dec, 2024 NA

Delhi - Delhi

Tender For supply of civil and electrical item for base hospital - aluminum tower bolt 200 mm , aluminum tower bolt 150 mm , aluminium floor door stopper , aluminium door handle 125mm , ms butt hinges 100 mm , door closer hydraulic , self screw 25mm goti type , self screw 25mm star type , gypsum black screw mix size 25mm or 40mm or 15mm or 20mm , favisol sh , glass putty , looking mirror with 3mm thick hard board in plastic moulding , nails 17no , nails assorted different sizes , plain glass 4.0 mm thick , brass bib cock 15 mm , cp waste coupling 32 mm dia , cp bib cock 15 mm dia , c p angle cock15mm , concealed spendal 20 mm , c p bib cock 15mm long body , cp toilet paper holder , cp jet spray with lead complete , cp health fucket , c p shower rose with nipple , brass spandle half turn , g i elbow 15mm , g i elbow 20mm , g i elbow 25mm , g i socket 15mm , g i socket 20mm , g i socket 25mm , g i tee 15mm , g i tee 20mm , g i tee 25mm , g i union 15mm , g i union 20mm , g i union 25mm , g i nipple15mm dia 75mm long , g i nipple 15mm dia 100mm long , g i socket reducer 25mm x 20mm , pvc connection 15 mm dia 60 cm long , wc seat europian type white , wc seat cover pvc for europian type wc seat , internal kit for pvc low level cistern kit , white cement birla white , pvc waste pipe 32mm dia , pvc float valve set complete 20mm , pvc float valve set complete 15mm , pvc float valve set complete 25mm , cpvc pipe 20mm , cpvc pipe 25mm , cpvc union 20mm , cpvc union 25mm , cpvc elbow 20mm , cpvc elbow 25mm , cpvc tee 20mm , cpvc tee 25mm , cpvc socket 20mm , cpvc socket 25mm , cpvc socket reducer 25 x 20mm , cpvc end cap 20mm , cpvc end cap 25mm , cpvc brass tee 20 x 15mm , cpvc brass elbow 20 x 15mm , cpvc mta 20mm x 15mm , cpvc mta 25mm , cpvc fta 20mm x 15mm , cpvc fta 25mm , cpvc elbow 50mm , cpvc tee 50mm , cpvc socket 50mm , cpvc union 50mm , cpvc pipe 50mm , cpvc gate valve 25mm , pvc clamp for cpvc pipe 20mm , solvent for cpvc joint , pvc gitti , sand paper 100 no. , sand paper 60 no. , wire mesh , cp jali , water tank cover for 500 ltr tank , m seal , wall putty , flexible wire 40 by 76 , piano type switch 6 amp one way , piano type socket 6 amp three pin , piano type switch 16 amp one way , piano type socket 16 amp , pvc tap roll , pvc copper wire 4.00 sqmm , pvc copper wire 1.5 sqmm , pvc copper wire 2.5 sqmm , wp wire 10 sqmm almn. 2 core , isolator 40 amp dp , mcb 6 to 32 amp , pvc batten holder , fan condencer 2.5 mfd , ceiling fan 1200mm , exhaust fan dxl200mm white , exhaust fan bahar 300mm metallic greywhite , exhaust fan 450mm 900rpm , geyser element 2000 watt complete , raised steel screw 15mm , 35mm plastic sleeve wall plugs pvc sleeve gitti pack of 100 , u type wire clip 6 no , u type wire clip 8 no , piano type fan regulator , call bell , piano type bell switch , casing caping 20mm , industrial top 16amp three pin , industrial socket 16amp , aluminium thimble 50mm , aluminium thimble70mm , aluminium thimble 100mm , aluminium thimble 120mm , rubber tape 6 mtr , complete board 16amp , sunmica sheet 7 inch x4 inch , sunmica sheet 8 inch x10 inch

Central Government/Public Sector

CTN :38445291

07 Jan, 2025 NA

East Singhbhum - Jharkhand

Tender For rc for sandvik make cone crusher spares - rc for sandvik make cone crusher spares, (a) spares for cone crusher, model cs-430, sl. no. 6116 & a4731:liner-pinion shaft arm, part no.-442.7915-01, liner-narrow arm, part no.-442.7914-01, liner, part no.-442.9035-01, side liner, 12 x 480 x 445, part no.-442.8864-01, side liner, 12 x 635 x 449, part no.-442.8865-01, side liner, 12 x 565 x 250, part no.-442.8866-01, side liner, 12 x 412 x 215, part no.-442.8867-01, side liner, 12 x 247 x 238, part no.-442.8868-01, side liner, 12 x 220 x 115, part no.-442.8869-01, arm liner, part no.-442.8451-01, main shaft sleeve, part no.-442.7913-01, mantle b m1, part no.-442.8471-01, head nut with burning ring, part no.-442.7912-00, burning ring, part no.-442-7911-01, spider cap, part no.-442.8520-00, spider bushing, part no.-442.6473-01, seal ring, part no.-442.6470-01, concave ring lower ec-ec2 m1, part no.-442.8477-00, concave ring ec second m1, part no.-452.1952-901, concave segment ec-ec2 m1, part no.-442.8484-00, air filter p10102 r1/4" + ins, part no.-912.0114-00, filter cartridge p x 37-13-2 mic25, part no.-912.0126-00, filter cartridge hc 2 , part no.-912.0129-00, air filter complete, part no.-912.0138-00, bottom shell bushing , part no.-452.4190-001, eccentric bushing throw 16 + 20 + 25 + 3, part no.-452.4516-001, piston wearing plate, part no.-442.7894-01, step washer, part no.-442.7894-01, o- ring, part no.-873.0157-00, o- ring, part no.-873.1275-00, oil seal ring, part no.-873.1097-00, retaining bar, part no.-442.8020-01, main shaft step, part no.-442.7895-01, inner head nut , part no.-442.7918-01, dust seal ring, part no.-442.8017-01, o ring 379, 3 x 5, 7 sms 1586, part no.-873.0833-00, mechnical seal 3884087, part no.-906.0142-00, pump unit rb5 40l/m 400vy50, part no.-442.3300-91a, control valve 4.5 mpa, part no.-902.0747-00, valve hawe mvex 6f-7.5 mpa, part no.-902.0656-00, relief valve 0.7 mpa, part no.-602.0717-00, pump hpi p3 ban 2004 l10, part no.-906.0270-00, pump albin rb5-01v 38-82874, part no.-906.0140-00, over pressure unit, part no.-442.8642-00, seal ring inner, part no.-442.7931-01, ring, part no.-442.7932-01, spider cap screw, part no.-840.0069-00, spider cap washer, part no.-847.0120-00, screw for spider bushing, part no.-840.0080-00, washer for spider bushing, part no.-847.0132-00, grease tribol 3020/1000 tin 18 kgs, part no.-825.0182-00, casting compound, part no.-831.0016-00, main shaft step dowel pin, part no.-853.0118-00, dust seal retainer screw (50 long), part no.-840.0068-00, dust seal retainer screw (60 long), part no.-840.0070-00, scraper , part no.-442.8022-01, scrapper retainer pt. , part no.-442.8021-01, mainshaft sleeve (new design), part no.-bg00215626, mainshaft cover, part no.-bg00514356, mainshaft cover allen screw, part no.-841.0658-00, bottomshell liner kit, part no.-442.8870-00, locating bar, part no.-452.4194-001, loacting bar screws, part no.-841.0019-00, shim t-0.1, part no.-442.7933-01, shim t-0.3, part no.-442.7933-02, shim t-0.5, part no.-442.7933-03, shim t-0.7, part no.-442.7933-04, locating bar kit, part no.-452.5797-901, eccentric wearing plate, part no.-452.4188-001, dust collar, part no.-442.7929-01, dust collar gasket, part no.-442.7934-01, dust collar washer, part no.-847.0016-00, pinion shaft, part no.-442.9936-01, shaft key, part no.-857.0046-00, retaining ring sga 80 (pinion), part no.-855.0103-00, oil seal ring (inner & outer), part no.-873.1097-00, bearing cover (inner), part no.-442.7951-01, bearing cover (outer), part no.-442.7950-01, filter plug g 1/4 f14 -brass breather, part no.-900.0717-00, gasket t=0.5 (outer cover), part no.-442.7956-01, gasket t=0.8 (outer cover), part no.-442.7956-02, gasket 0.8 (inner cover), part no.-442.7957-01, gasket t=0.5 (pinion housing to bottom shell), part no.-442.7953-01, gasket t=0.8 (pinion housing to bottom shell), part no.-442.7953-02, gasket t=1.5 (pinion housing to bottom shell), part no.-442.7953-03, pinion shaft repair kit, par

Sealing Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector