Latest sectionalisation stoping Tenders | Government sectionalisation stoping Tenders

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

State Government

CTN :45290474

02 Jun, 2026 NA

Rupnagar - Punjab

Tender For construction of gabion structures village masol tanda kasauli bhagindi parachh tandi run off control structure and inlet ghaat of pond project village parach water harvesting cum natural recharging structure village masol construction of spurs rakoli

CTN :45236118

02 Jun, 2026 34.64 Lacs

Murshidabad - West Bengal

Tender For supply and installation and commissioning of different machineries and tools of dihipara beekeeping cluster, dihipara, murshidabad under wbkvib during the year 2026 27 2nd call - supply and installation and commissioning of raw honey storage tank specification:fabricated from 304 grade 3 mm thick stainless-steel sheet, all joins argon welded and polished. one number manhole is provided on top. both top and bottom is dished type.capacity 1200 kg, supply and installation and commissioning of honey processing plant 1. ms control panel - 012. ss channel and angel structure - 013. pre heating tank in coil shape - 014. microfine replaceable cartridge filter press with gear pump - 015. processing tank with 1 nb coil - 016. falling film evaporator with ms stand - 017. wate ring vaccum pump 3 hp + water pump - 028. cooling tank with 1 nb pipe coil - 019. settling tank - 0210. set of ss pipes for honey piping - 0111. set of gi pipes with specials for water pump fitting -01specification:1. one no stainless steel prefilter tank having thickness of 1.6mm with volumetric, capacity of 500 kg along with 500 micron mesh.2. gear pump: made by m/s. rotodel company with full stainless steel body and gears. basic output capacity: 2000 its/hour. it will be suitably reduced to give required output.3. drive motor: 1.00 h.p. 3 phase 440 vol tefc 1440 rpm make crompton or siemens.4. pre-heating tank: made from 2.0 mm thick stainless steel sheet with heater.5. microfine filter: full stainless steel self locking high pressure filter which has poly propylene filters made of 40 micron size,6. processing tank: made from 2.0mm thick stainless steel sheet. one set of coil will be provided for processing tank.7. crompton make water circulation pump 0.50 hp, mono block, with 18 m head, 230 volt ac single phase mechanical seal.8. falling film evaporator: made from 3.0 mm thick stainless steel sheet, with concentric cone in side. subjected to vacuum and ensuring falling film, to evaporate moisture.9. cooling tank: made from 1.5 mm thick stainless steel sheet, exactly same as pre-heating tank but without heaters.10. settling tank: made from 2.0 mm thick stainless steel sheet, top and bottom dished ends fully leak proof, bottom drain for honey withdrawal.11. control panel: having cut off mcb, control circuit fuses, and mcb in each time to protect the wiring, with brass earthing bolt to prevent electric shocks.12. water ring vacuum pump: 1.0 hp, 3000 rpm, 440 volts ac, tefc. kirloskar make with 750+mm 4g vacuum.13. ms chasis made out of 75x40 ms channel in two parts., supply and installation and commissioning of semi automatic volumetric honey filling machine, twin head, stroke typespecification:this is specially designed to fill squash/juice in bottles. all contact parts are made from 304 type stainless steel materials, supported on mild steel angle structure, covered with stainless steel sheet. the machine is suitably arranged to upper and lowering of filling head with nozzle so that there is no spillage of squash or juice while filling. this helps to fill in accurate measure.no bottle no filling system.operated by 1 hp motor with gear box.filling capacity: 100ml to 500 ml.filling speed: 14/16 bottles per minute., 500 ml to 1000 ml, supply and installation and commissioning of twist off lug cap sealing machine:specification:for 100% leak proof airtight sealingno hand pulling system.this machine is ideal way to hermetically seal bottles products with twist off/vacuseallug caps to preserve taste and flavour.semi-auto-manual and pneumatic working.capacity: 600 bottles/hr of 53 to 63 mm caps. (for 200 and 400 gm. pickle)supply is complete with air compressor., supply and installation and commissioning of weight scale digital display specification:capacity: 100 kgreadability: 10 gm, supply and installation and commissioning of digital refractometer, supply and installation and commissioning of shrink tunnel specification:seals pp/pvc shrink film.separate controls for h

CTN :45048307

08 Jun, 2026 NA

Tarapur - Maharashtra

Tender For : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of spares for diese

Central Government/Public Sector

CTN :45135303

15 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap ms mix scrap including cond. protective tube / ms. desh pot / sole bar pieces / battery box ms. small / head stock part / destruction tube pieces / auxiliary and control reservior /main door with/without fiber, aluminium attechment, tension rod spring, galvanized pipe, & minor c.i. parts,bogie frame parts, e.f.c.t box, emergency window, center pivot ventilation , screw coupling beam, side wearier cover, axle box safety guard, equalizing stay safety guard, wash basin pipe, a/b pipe , three way junction box, shutter door, battery charging terminal, rru stand, wheel stand ,m.s ventuary ,false plate, a.r tank c.r. tank, lavatory all pipe, main door, sliding door , seat protector chain, laggauge rack with and without wooden attachment minor n/f attachment , heavy corroded coach structure/left and right ms side pillars,nut bolt, all size plate, icf/lhb coach m s all item & etc.... this does not includes ,a/box hosuing,buffer assembly, brake beams,lower plank, etc. if found any shall be separated and won't be delivered. all type old used and unserviceable. mode of delivery in weight. purchaser shall clear material upto ground level and clear the site.material stuck between trees also need to be cleared. first loading point at opposite new rehab section without any sorting. approx aluminium attachement is 0.15%, approx fibre attaachment is 0.25%, approx s.s attachment is 0.25%, & approx wooden attachment is 0.25%. only manual loading will be allowed. total lot qty - 130 mt, custodian - sse scrap bvp, location - : (1) behind new rehab section bg workshop (2)bvp bg workshop opp. side of big water tank besides rcc road as is where is basis, loading by purchaser, fdp 50 days.

CTN :45072222

14 May, 2026 NA

Goa - Goa

Tender For repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

Central Government/Public Sector

CTN :45002525

05 May, 2026 14.14 Lacs

Gwalior - Madhya Pradesh

Tender For tender for supply of airconditioners and other items at gwalior airport -supply of 1.5 tr inverter type , 5 star rating as per latest bee norms , hiwall , split airconditioner with rotary compressor operating on refrigerant r-32a/r-410a. the body of indoor unit shall be made of abs/hips/gs condensing unit should be of 100% copper coil & having all safety , air filters , evaporator , condenser , cordless remote , electronic operation control & all accessories supplied with the unit by oem etc as per manufacturer standards suitable for operation on 230 volts , 50 hz , single phase , ac supply , complete as required at site. , supply of 2.0 tr inverter type , 5 star rating as per latest bee norms , hi-wall , split airconditioner with rotary compressor operating on refrigerant r-32a/r-410a. the body of indoor unit shall be made of abs/hips/gs condensing unit should be of 100% copper coil & having all safety , air filters , evaporator , condenser , cordless remote , electronic operation control & all accessories supplied with the unit by oem etc as per manufacturer standards suitable for operation on 230 volts , 50 hz , single phase , ac supply , complete as required at site. , installation , testing , commissioning of 2.0/1.5 ton split inverter a/c i/c supply & fixing of iron angle structure stand suitable for outdoor unit , makeup interconnection , top up refrigerent , painting i/c necessary civil works complete as required , providing suitable size pvc pipe for drawing the gas/drain pipe and wire etc through the concrete/brick wall as required. , supply & fixing of extra copper refrigerant piping for suction and delivery line with all accessories suitable for following capacity acs i/c insulation , gas refiling , power & control cabling etc completed as required.of standard gauge for installation of above units as required at site. , supply & fixing of hard pvc drain piping of proper dia for installation of above units as required at site beyond company provided standard length. , supply , installing , testing and commissioning of 5kva voltage stabilizer suitable for 1.5/2.0 tr split ac units on wall including providing connections etc. as required. (model-v guard vgb 500 or equivalent). , sitc of industrial type ro water purifier having capacity minimum 50 lph capacity with uv & membranes , sediment filter , carbon filter , tds control , water level sensor , 3 prefilter (1 carbon candle and 2 micron filter) , auto flush & output water etc as per manufacturers specifications i/c , making inlet and outlet water connections with water cooler complete. suitable for operation on 230 v , single phase , 50 hz ac supply. , supply of water cooler of fully stainless steel body with thermostate cut- off automatic operation having cooling capacity 40 ltr. per hour and storage capacity 80 ltr per hour , working on 220 v , 50 hz , ac supply including automatically controls with temperature , over load protection , water line connection etc. complete as required . , supply of desert air cooler (duct type) with following minimum specifications as given below. fan size - 18 inch & above. fan speed - 1400rpm/ 3 speed. water tank capacity - 110 litres & above - jointless tank. material of cooler body/sump tank - galvanized steel sheet (isi marked to is 277 latest) cooling media - aspen/wood wool. cooling area - 500sqft & above. cooling pads - on 4 sides. , supply of frp wall support ladder of size 12feet meeting specifications as provided in the technical specifications of the agreement of the work(make - arham/ladderman/sumer/y-access) , supply of frp wall support ladder of size 20feet meeting specifications as provided in the technical specifications of the agreement of the work(make - arham/ladderman/sumer/y-access) , supply of frp tiltable telescopic tower ladder of size 32feet meeting specifications as provided in the technical specifications of the agreement of the work. (make - arham/ladd

CTN :44994027

08 May, 2026 7.96 Lacs

Bikaner - Rajasthan

Tender For supply and fixing of selfie point at nagar palika area - supply and fixing of selfie point 4 feet height letters and length as per desing mat of 3 mm thich white uv stable acrylic sheet front and sides with min 3 mm clear acrylic sheet and 3 mm acp sheet at backside with pipe support of 1"x1" pipe on all the letters to gave strength & staiblity. acrylic sheet and backside acp should be paste with 3mm acrylic sheet by bending it as per letter there should be setup to fix all the letters on the base structure. (30 x 4 x 5") a complete job of " i (heart logo) deshnoke" and encluding pvc coat aluminium cable , supply and fixing water proof led modules for lighting up the letters including fitting up of light module inside the letters with not a single wire outside the letter to give asthetical good look to letter for all the letters with smps , contruction of random massorary covered of black granite with encluding civil work granite stand size 32 x 4 x 2 feet lbh. , supply and fixing of control panel box having mcb, connectors, timer, on/off switch, indicator, and all components and accessories connecting from panel to selfie point required to light up selfie point structure. mount

State Government

CTN :44846128

25 Apr, 2026 NA

Vadodara - Gujarat

Tender For supply of isi mark gi pipe all fittings 25 mm dia , lowering laying and jointing gi pipe 25 mm dia , isi mark gi pipe all fittings 40 mm dia , lowering laying and jointing gi pipe 40 mm dia , isi mark gi pipe all fittings 50 mm dia , lowering laying and jointing gi pipe 50 mm dia , isi mark gi pipe all fittings 80 mm dia , lowering laying and jointing gi pipe 80 mm dia , isi mark gi pipe all fittings 100 mm dia , lowering laying and jointing gi pipe 100 mm dia , isi mark gi pipe all fittings 150 mm dia , lowering laying and jointing gi pipe 150 mm dia , providing supplying lowering laying and jointing isi mark gi pipe 200 mm dia , two coats of enamel paint over and one coats of red oxide primer , brass quartzoid sprinklers 68 degree , drain assembly 255 mm dia , ss flexidrop 700 mm long , ss flexidrop 1000 mm long , ss rosset plate , hydrant valve type a , short branch pipe , hose reels drum , hose boxes single door , hose boxes double door , rrl hose pipe , 4 way fire brigade inlet , wrapping 4mm thick protection coating 150mm , wrapping 4mm thick protection coating 100mm , ms steel for supports , core cutting 150 mm , core cutting 100 mm , core cutting 80 mm , excavation for pipe line , rcc pipe 300 mm dia , lowering laying and jointing rcc pipe 300 mm dia , refilling of trench , diesel driven pump , electric driven main fire pump , jockey pump , fire pump control panel , pressure vessel , sluise valve 200 mm dia , sluise valve 150 mm dia , sluise valve 80 mm dia , sitc butterfly valve ci body 150 mm dia , sitc butterfly valve ci body 100 mm dia , sitc butterfly valve ci body 800 mm dia , double flanged metal bellows 150 mm dia , double flanged metal bellows 80 mm dia , y type stainer or foot valve 150 mm dia , y type stainer or foot valve 80 mm dia , sitc nrv non return valve 150 mm dia , sitc nrv non return valve 80 mm dia , air release valve , cable end termination and connection 1 point 5 sqmm , cable end termination and connection 4 sqmm , cable end termination and connection 16 sqmm , cable tray system , pressure gauge , pressure switches , ms steel for supports , addressable 1 loop main panel , addressable 2 loop main panel , single loop card , photoelectric smoke detector , manual call point , addressable sounder , computer based software , isolator base , 1 point 5 sqmm 2 core red cable armd , 12v 7ah batteries for panel , 10w speaker , voice alarm controller , six zone call or paging station , abc powder type fire extinguisher 6kg , abc powder type fire extinguisher 5kg , co2 type fire extinguisher 4 point 5 kg , emergency exit board , fire hydrant board , fire alarm call point board , abc extinguisher board , co2 extinguisher board , pass or race board , assembly point board , left side man running with arrow tape board , anti skid tape , evacuation plan , fire buckets , emergency light with exit sign , maintenance of equipment 1st year , maintenance of equipment 2nd year , maintenance of equipment 3rd year , legal and liasoning charges , rcc water tank 100000 ltr , rcc frame structure for pump , cc grade m25 , mass cement concrete in 148 proportion , tmt fe500 steel , pvc pipe 63 mm dia , pvc pipe 75 mm dia , lowering laying and jointing pvc pipe 63 mm dia , lowering laying and jointing pvc pipe 75 mm dia

State Government

CTN :44846142

25 Apr, 2026 NA

Anand-Guj - Gujarat

Tender For supply of isi mark gi pipe all fittings 25 mm dia , lowering laying and jointing gi pipe 25 mm dia , isi mark gi pipe all fittings 40 mm dia , lowering laying and jointing gi pipe 40 mm dia , isi mark gi pipe all fittings 50 mm dia , lowering laying and jointing gi pipe 50 mm dia , isi mark gi pipe all fittings 80 mm dia , lowering laying and jointing gi pipe 80 mm dia , isi mark gi pipe all fittings 100 mm dia , lowering laying and jointing gi pipe 100 mm dia , isi mark gi pipe all fittings 150 mm dia , lowering laying and jointing gi pipe 150 mm dia , two coats of enamel paint over and one coats of red oxide primer , brass quartzoid sprinklers 57 degree , drain assembly 25 mm dia , ss flexidrop 1000 mm long , ss rosset plate , hydrant valve type a , short branch pipe , hose reels drum , hose boxes single door , rrl hose pipe , 4 way fire brigade inlet , wrapping 4mm thick protection coating 150mm , wrapping 4mm thick protection coating 100mm , ms steel for supports , core cutting 150 mm , core cutting 100 mm , core cutting 80 mm , excavation for pipe line , rcc pipe 300 mm dia , lowering laying and jointing rcc pipe 300 mm dia , refilling of trench , diesel driven pump , electric driven main fire pump , jockey pump , fire pump control panel , pressure vessel , sluise valve 150 mm dia , sluise valve 80 mm dia , sitc butterfly valve ci body 150 mm dia , sitc butterfly valve ci body 100 mm dia , sitc butterfly valve ci body 80 mm dia , double flanged metal bellows 150 mm dia , double flanged metal bellows 80 mm dia , y type stainer or foot valve 150 mm dia , y type stainer or foot valve 80 mm dia , sitc nrv non return valve 150 mm dia , sitc nrv non return valve 80 mm dia , air release valve , cable end termination and connection 1 point 5 sqmm , cable end termination and connection 4 sqmm , cable end termination and connection 16 sqmm , cable tray system , pressure gauge , pressure switches , ms steel for supports , addressable 2 loop main panel , photoelectric smoke detector , manual call point , addressable sounder , computer based software , isolator base , 1 point 5 sqmm 2 core red cable armd , beam type smoke detector , 12v 7ah batteries for panel , abc powder type fire extinguisher 6kg , abc powder type fire extinguisher 5kg , co2 type fire extinguisher 4. point 5 kg , 4 kg fk 5112 extinguishing agent , fire detection tube , end line adaptor for fire detection tube , end of line plug , pressure switch , tube t connector push type , mcu 1 master control unit , installation charges , emergency exit board , fire hydrant board , fire alarm call point board , abc extinguisher board , co2 extinguisher board , pass or race board , assembly point board , left side man running with arrow tape board , anti skid tape , evacuation plan , fire buckets , emergency light with exit sign , maintenance of equipment 1st year , maintenance of equipment 2nd year , maintenance of equipment 3rd year , legal and liasoning charges , rcc water tank 100000 ltr , rcc frame structure for pump , cc grade m25 , mass cement concrete in 148 proportion , tmt fe500 steel , pvc pipe 63 mm dia , pvc pipe 75 mm dia , lowering laying and jointing pvc pipe 63 mm dia , lowering laying and jointing pvc pipe 75 mm dia

Sectionalisation Stoping Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government