Latest shackle insulator Tenders | Government shackle insulator Tenders

CTN :39839503

07 Apr, 2025 NA

Mehsana - Gujarat

Tender For annual tender for supply of lt gi bolt of lt shackle insulator for vijapur division

corporations/Associations/Others

CTN :39824813

07 Apr, 2025 NA

Salem - Tamil Nadu

Tender For procurement of lt guy shackle insulator

CTN :39795347

02 Apr, 2025 49.40 Lacs

Ganganagar - Rajasthan

Tender For providing and fixing electrical material including led lights and wiring in nagar parishad anupgarh area. - electrical work, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .led street light fixture with minimum lumen output 5600 lm, led street light fixture with minimum lumen output 7500 lm, led street light fixture with minimum lumen output 12500 lm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr10.0 sq. mm2 core, supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsrdead end clamp with eye hook & pole clamp, providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .40 mm dia., supply and fixing of lt porcelain shackle insulator as per is:1443 1979 and as per discoms standard specifications, suitable for working voltage 1100 volts including all accessories like gi hardware fittings confirming to is:7935/1975 (latest amended) nut, bolt etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr100mm x 110mm, supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr4.0 sq.mm,

CTN :39803137

22 Apr, 2025 1.10 Crore

Bangalore - Karnataka

Tender For supply, installation, commissioning and operation of 1000kg per day capacity amla processing plant at karnataka state lamps cooperative federation, mysuru under ntfpce project-fruit washer with elevator: water jet washing of amla fruits and feeding same to screw blancherfunction: for through washing of amla fruits and feeding same to screw blancher construction: it consists of 4 sections; soaking, washing with agitation, fresh water spraying, water draining. stainless steel rectangular shaped tank with legs, cross supports etc. the water in the tank is agitated with the help of high-speed blower through perforated air pipes installed at the bottom of the tank. the bubbles are generated with the help of high-speed air blower, which is an integral part of washer. circulation pump to create water jet to pushing fruits towards elevator. continuous polypropylene stackable slat conveyors with flights the fruit washer tank will be provided with bottom drain connection, water level adjusting arrangement with overflow connection, and fresh water spraying arrangement, feed hopper, discharge chute, motor shroud, chain guard. variable speed drive using vfd motor hindustan/equivalent make, gearbox: bonfiglioli /equivalent make. input capacity: 100 kg / hr. overall dimensions: 2780 mm (l) 770 mm (w) 1874 mm (h) (as per the supplier design and site conditions) elec. power: blower: 0.5 hp, main drive: 0.5 hp circulation pump : 0.5 hp water consumption: 200 ltr m.o.c: ss 304, water recirculation and proper drainage arrangement for the system.feeding table: collecting the amla from the farms and feeding the same to fruit washer 1.2mm thick gauge ss table top and raised edges. drain outlet at one end, square tube structure. size: approx. 1700 mm (l) x 900 mm (w) x 850 mm (h)m.o.c:- wetted parts stainless steel 304 grade (ss 304)belt type continuous blancher function: suitable for blanching of amla fruit for easy separation of the segments. construction: continuous cooking of amla approx. 85 c - 90c.capacity:- 150 kg/hr heating chamber is rockwool insulated & covered by stainless steel sheets. small discharge chute at the end of screw for removing amla fruit out of the chamber. stainless steel self-supporting structure. all necessary steam fittings complete with temperature indicator, y strainer, steam trap, safety valve thermal insulation coating for steam lines and hot lines. retention time approx. 8 to 10 minutes (finalized during detail engineering). stainless steel control panel complete with variable speed frequency drive necessary electrical fittings temperature sensor and auto cutoff steam requirement: 100 to 150 kg. / hr. @ 2.5 kg./ cm2 belt width 400 mm wide 4500 m long approx. suitable for blanching fruits blanching temperature 85c to 95c pp food quality modular belt, suitable for high temperature for smooth operation and high reliability suitable for products transferring in hot water. hot water pump used for water circulation through spray nozzle on top side on the belt, live steam pipe connection to heat the water in the bottom chamber. or direct steam can be purged on the product if suitable to raw material water filter screen and overflow is provided for removingforeign particles. top covers with holding bars, side windows can beopened to easy maintenance and fast cleaning. steam control valve with pid controller for temperaturecontrolling. temp indicator with pt 100 sensor provided for belt speed controlling vfd provided feed and discharge chute of ss-304. drive through simplex chain and chain wheel electrical power: - 0.5 hp water pump & 0.5 hp gear box motor: hindustan/equivalent make, gearbox: bonfiglioli / equivalent make. m.o.c :- s.s 304note: 1. manufacture should ensure that, the amla should not be damaged during blanching process 2. overall dimensions and motor power ratings may vary depending on the manufacturer design and site conditions.blanching tank :semi -automatic operationsuitable for