Latest shutter frame Tenders | Government shutter frame Tenders

Central Government/Public Sector

CTN :39645418

03 Apr, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and

CTN :39872977

19 Apr, 2025 31.00 Lacs

Kargil - Jammu And Kashmir

Tender For supply of ms shuttering plate of size 1mtr x 1 mtr , ms shuttering plate of size 1mtr x point 600 mtr , ms parapet shuttering frame , ms shuttering plate of size 1mtr x point 300 mtr , ms shuttering plate of size 1mtr x point 500 mtr , ms shuttering plate of size 1mtr x point 400 mtr , adjustable jack for shuttering , base plate

CTN :39835553

15 Apr, 2025 31.00 Lacs

Kullu - Himachal Pradesh

Tender For supply of ms shuttering plate of size 1mtr x 1 mtr , ms shuttering plate of size 1mtr x point 600 mtr , ms parapet shuttering frame , ms shuttering plate of size 1mtr x point 300 mtr , ms shuttering plate of size 1mtr x point 500 mtr , ms shuttering plate of size 1mtr x point 400 mtr , adjustable jack for shuttering , base plate

Corporations And Associations And Others

CTN :39832502

29 Mar, 2025 4.96 Lacs

Rajouri - Jammu And Kashmir

Tender For supply of precast material such as precast rcc slabs, premix cold emulsion bitumen bags etc. for day to day repair work at m.c. store hari nagar ward no.99/wz. - description/ item, p/f precast rcc slabs/grating 70mm thick manufactured with cc 1:2:4 stone aggregate 20mm nominal size) reinforced with 96 kg/m3 of rcc i/c lapping all four side with m.s. sheet 1.6mm thick and fixing in position complete (drain covers with or without holes), supply and stacking premix cold emulsion bitumen bags, supply and stacking preacst rcc grating with frame 500x450mm, supply ans stacking circular shape 560mm thick shutters with frame ehd 35

CTN :39774866

11 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of superstructure of gun repair shed of size 20.00 m x 10.00 m x 5.00 m height for gun repair shed under job no 2519 as per technical specification and drgs attached , distribution box 8 way, double door spn 240 volts copper bus bar and neutral link earthing stud conforming to is-13032 and is8623 double door type make-havells,legrand,l and t , mcb spn 240 volts 32 amps make-havells, l and t standard , mcb sp 6 to 32 amps make-havells, l and t, standard , pvc tape 19mm wide 5 m long make-steelgrip,anchor,kinjal , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor of size 1.5 sqmm single core as per store list attached , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor of size 2.5 sqmm single core as per store list attached , pvc casing capping 1 inch long medium grade snow white havells,finolex,polycab, natural white or equivalent , pvc casing capping 3 oblique 4 inch long medium grade snow white havells,finolex,polycab, natural white or equivalent , switch piano 5 amp 230 volts flush type one way snow white havells,finolex,polycab, natural white or equivalent , led tube light fittings 20w rechargeable 230v box type 4 feet with crca body pre coated white and prewired for led tube complete makehavells,bajaj,philips, crompton , screw full thread 6 x 19 mm isi marked, 200 nos pkt. , steel screw full thread with rawl of size1 1 oblique 2 isi marked, 100 nos per pkt. , pvc switch board snow white size 7 inch x 4 inch for sockets and switches havells,finolex,polycab, natural white or equivalent , pvc switch board snow white size 8 inch x 10 inch for main switches oblique db havells,finolex,polycab, natural white or equivalent , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 havells finolex,polycab, natural white or equivalent , switch socket combination snow white multipurpose 2 in 1, 15 amp 230 volts make-anchor,ssk, cona , switch socket combination snow white 5 amp 230 volts make-anchor, ssk, cona , service bracket 40mm dia gi tubing medium grade 1.5 mtr long make-jindal,tata,kalinga , service cable pvc insulated aluminium conductor, 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed as per store list attached , ceiling rose three terminal snow white make- anchor, ssk,cona , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts rechargeable type make-havells,bajaj, philips,cropmtion , pvc flexible wire copper conductor multi stranded 0.0016 oblique 76 make-havells, finolex, plaza , pvc flexible conduit pipe 15 mm dia havells,finolex,polycab, natural white or equivalent , pvc round oblique square block make-polycab,supreme, finolex , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side. , ci earth pit cover of size 300 x 300 x 6 mm with angle iron frame of size 20x20mm, 3 mm thick with ms frame. , funnel fitted with 20 mm diameter gi pipe 1.5 m long. pipe make-jindal,tata, kalinga , gi wire 4 mm diameter for earthing. , charcoal , salt normal , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal, tata, kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto,polycab, finolex , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make-bir

CTN :39774927

10 Apr, 2025 NA

Sonitpur - Assam

Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold or ambuja or ultratech or acc or jkj dalmia , stone boulder 9inch to 12inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded . , coarse aggregate 40mm graded , water proofing compund conforming to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , cement based paint snowcem make berger or asian or nerolac , synthetic paint enamelled og conforming to is 5 ur 2004 make asian or berqer or nerolac , synthetic paint enamelled brown confirming to is 5 2004 make berger or asian or nerolac , anti corrosive red oxide zinc chromate primer conforming to is 5 2004 make asian or berger or nerolac , loop holes 1000 x 300 mm make tata or sail or jsw , ventilator steel 300 x 450 mm will be fabricated using isa 35 x 35 x 5mm for outer frame and isa 30 x 30x 3mm for shutter frame with blace sheet as per ts , ms binding wire , ismb hot rolled ms 125 4000 mm long make tata or sail or jsw , isms hot rolled ms 125 1200 mm long make tata or sail or jsw , srt 1840 x 613x 180 mm 2 mm thick ms sheet hot rolled steel with nuts bolt incl one coat of red oxide make tata or sail or jsw , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm and door shutter frame of isa 35x35x5mm and all stiffner as per ts , hdpe sand bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per bag , mild steel bar of size 6 to 8 mm dia conforming to is 432 part ll 1982 make tata or sail or jsw , prefeb folding double sleeping bunks madeof ms columns 65x 65x6mm and ms plate form made of isa 40x40x6mm hold fast 65x65x6mm 230mm long 12mm as per ts , polythene sheet colour less and weight of sheet shall be not less than 70gm or sqm , wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various sizes , nails various size , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12mm dia and 300mm long , gi pipe 20 mm dia light grade make jindal or tata or kalinga , gi pipe 40 mm dia light grade make jindal or tata or kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto or polycab or finolex , testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe make jindal or tata or kalinga , galvanised iron strip 32x6mm

Central Government And Public Sector

CTN :39751221

27 Mar, 2025 28.7 Thousand

Mangalore - Karnataka

Tender For attending of major lt ht faults in electrical installation in various te buildings under mysore ba for the year 2024 to 2025 and 2025 to 2026. sh electrical repair works providing ms frame structure to cover open dg room at te nazarbad mysore.

CTN :39711512

07 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmiya under job no 2502 mmg bkr as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40-63 mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , water proofing compound confirming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9 mtr isi marked with min weight of 34 kgs oblique roll , cement based paint snowcem make-berger , asian , nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled brown confirming to is 5-2004 make-berger , asian , nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger , asian , nerolac , loop holes 1000 x 300 mm make-tata , sail , jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , ms binding wire tata , sail , jsw , ismb hot rolled ms 125 , 4000mm long make-tata , sail , jsw , ismb hot rolled ms 125 , 1200mm long make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , prefab mild steel door of size 900x1700 , outer frame made out of isa 40x40x6mm and door shutter frmae of isa 35x35x5mm and all stiffner isa 30x30x3mm. steel shall conform to is-800 make-tata , sail , jsw , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , preferb folding double sleeping sleeping bunks made of ms columns 65x65x6 mm and ms plate from made of isa 40x40x6mm , hold fast make-tata , sail , jsw as per store list attached , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , nails various size , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make-jindal , tata , kalinga , gi pipe 20 mm dia light grade make-jindal , tata , kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make-presto , polycab , finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make-jindal , tata , kalinga , galvanized iron strip 32 x 6 mm

CTN :39711513

07 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2506 svl pd with ohp as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , water proofing compund conforming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata , sail , jsw , cement based paint snowcem make-berger , asian , nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched , weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian , berger , neroloc , synthetic paint enamelled og conforming to is 5-2004 make-asian , berger , nerolac , thinner. make-nerolac , berger , asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata , sail , jsw , prefeb mild steel door of size 750x 1800mm double shutter , outer frame made out of isa 40x 40x6mm and door shutter frame make-tata , sail , jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , loop holes 780 x 300 mm make-tata , sail , jsw , loop holes 1000 x 300 mm make-tata , sail , jsw , loop holes 1250 x 300 mm make-tata , sail , jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal , tata , kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings , drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto , polycab , finolex. , charcoal , salt

CTN :39711542

07 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmia under job no 2504 ags pd as per store list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make- tata , sail , jsw , water proofing compund conforming to is 2645-2003 make-pidilite , dr fixit , fevicol , quick setting compound make-pidiite , quick fix , fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata , sail , jsw , cement based paint snowcem make-berger , asian , nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched , weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian , berger , neroloc , synthetic paint enamelled og conforming to is 5-2004 make-asian , berger , nerolac , thinner make-nerolac , berger , asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata , sail , jsw , prefeb mild steel door of size 750x 1800mm double shutter , outer frame made out of isa 40x 40x6mm and door shutter frame of make-tata , sail , jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , loop holes 780 x 300 mm make-tata , sail , jsw , loop holes 1000 x 300 mm make-tata , sail , jsw , loop holes 1250 x 300 mm make-tata , sail , jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm make-tata , sail , jsw as per store list , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mmas per store list , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make-jindal , tata , kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings , drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto , polycab , finolex , charcoal , salt

Shutter Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government And Public Sector