Latest shutter Tenders | Government shutter Tenders

corporations/Associations/Others

CTN :42485358

21 Jan, 2026 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

21 Jan, 2026 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

CTN :43250168

20 Jan, 2026 1.51 Lacs

Holalkere - Karnataka

Tender For corrigendum : procurement of spare parts required for maintenance of drinking water and supply of new motor pumps and panel boards for malladhihalli grama panchayath for the year 2025-26. - axel blade(15f gp), motor 7.5 hp 14 stage(15f gp), cable 2.5sq(15f gp), ball valve 110 mm(15f gp), service shadel 75x25 mm(15f gp), service shadel 63x25 mm(15f gp), tee 75 mm(15f gp), tee 63 mm(15f gp), shutter lock(15f gp), body lock (15f gp), mk1 dolo 22a(15f gp), combination(15f gp), solvent 500 ml(15f gp), solvent 100 ml(15f gp), gi collor 3by4(15f gp), motor 6hp 8 stage(15f gp), copper wires(15f gp), mains wire 10 mm(15f gp), g i nipple 2x36(15f gp), g i nipple 2x48(15f gp), cap 2x8(15f gp), bore clamp 2 inch(15f gp), ready collor 90mm(15f gp), ready collor 75mm(15f gp), g i bend 2 inch(15f gp), g i pipe 1.25 inch(15f gp), flanz set(15f gp), no volt coil(15f gp), hand pump telescopic stand(15f gp), hand pump m10 boltnut(15f gp), hand pump lower valve(15f gp), hand pumpchain coupling(15f gp), hand pump connecting rod(15f gp), axle pin for hand pump(15f gp), hand cylinder bassem pump(15f gp), gi nipple(15f gp), ready collor(15f gp), nrv pandey(15f gp), g i bend 25 mm(15f gp), upvc pipe 3/4(15f gp), pvc reduce collor 2 inches(15f gp), pvc service handle 2.75 inches(15f gp), relay(15f gp), cable(15f gp), amps pause 63(15f gp), g i nipples 2 inch(15f gp), pvc collor 2.5 inch(15f gp), pvc collor 2 inch(15f gp), pvc collor 1 inch(15f gp), pvc bend 2.5 inch(15f gp), pvc bend 2 inch(15f gp), pvc bend 1 inch(15f gp), ams meter(15f gp), preventer(15f gp), auto starter(15f gp), upvc mta(15f gp), upvc fta(15f gp), upvc elbow 3/4(15f gp), upvc bend 3/4(15f gp), upvc collor 3/4(15f gp), upvc gums(15f gp), steel water taps(15f gp), motor pump 7.5 hp 14 stage starters(15f gp), pvc gum(15f gp), pvc reduced collor 2.5 inch(15f gp), g i collor elbow bend 2 inch(15f gp), g i pipe 2 inch(15f gp), motor pump 7.5 hp 10 stage(15f gp), elbow 3 inch(15f gp), elbow 2.5 inch(15f gp), elbow 2 inch(15f gp), elbow 1 inch(15f gp), pvc valve 3 inch(15f gp), pvc valve 2.5 inch(15f gp), pvc valve 2 inch(15f gp), pvc valve 1.5 inch(15f gp), pvc valve 1 inch(15f gp), pvc pipe 3 inch(15f gp), pvc pipe 2.5 inch(15f gp), pvc pipe 2 inch(15f gp), pvc pipe 1.5 inch(15f gp), pvc pipe 1 inch(15f gp)

CTN :43250171

20 Jan, 2026 1.51 Lacs

Holalkere - Karnataka

Tender For corrigendum : procurement of spare parts required for maintenance of drinking water and supply of new motor pumps and panel boards for malladhihalli grama panchayath for the year 2024-25. - axel blade(15f gp), motor 7.5 hp 14 stage(15f gp), cable 2.5sq(15f gp), ball valve 110 mm(15f gp), service shadel 75x25 mm(15f gp), service shadel 63x25 mm(15f gp), tee 75 mm(15f gp), tee 63 mm(15f gp), shutter lock(15f gp), body lock (15f gp), mk1 dolo 22a(15f gp), combination(15f gp), solvent 500 ml(15f gp), solvent 100 ml(15f gp), gi collor 3by4(15f gp), motor 6hp 8 stage(15f gp), copper wires(15f gp), mains wire 10 mm(15f gp), g i nipple 2x36(15f gp), g i nipple 2x48(15f gp), cap 2x8(15f gp), bore clamp 2 inch(15f gp), ready collor 90mm(15f gp), ready collor 75mm(15f gp), g i bend 2 inch(15f gp), g i pipe 1.25 inch(15f gp), flanz set(15f gp), no volt coil(15f gp), hand pump telescopic stand(15f gp), hand pump m10 boltnut(15f gp), hand pump lower valve(15f gp), hand pumpchain coupling(15f gp), hand pump connecting rod(15f gp), axle pin for hand pump(15f gp), hand cylinder bassem pump(15f gp), gi nipple(15f gp), ready collor(15f gp), nrv pandey(15f gp), g i bend 25 mm(15f gp), upvc pipe 3/4(15f gp), pvc reduce collor 2 inches(15f gp), pvc service handle 2.75 inches(15f gp), relay(15f gp), cable(15f gp), amps pause 63(15f gp), g i nipples 2 inch(15f gp), pvc collor 2.5 inch(15f gp), pvc collor 2 inch(15f gp), pvc collor 1 inch(15f gp), pvc bend 2.5 inch(15f gp), pvc bend 2 inch(15f gp), pvc bend 1 inch(15f gp), ams meter(15f gp), preventer(15f gp), auto starter(15f gp), upvc mta(15f gp), upvc fta(15f gp), upvc elbow 3/4(15f gp), upvc bend 3/4(15f gp), upvc collor 3/4(15f gp), upvc gums(15f gp), steel water taps(15f gp), motor pump 7.5 hp 14 stage starters(15f gp), pvc gum(15f gp), pvc reduced collor 2.5 inch(15f gp), g i collor elbow bend 2 inch(15f gp), g i pipe 2 inch(15f gp), motor pump 7.5 hp 10 stage(15f gp), elbow 3 inch(15f gp), elbow 2.5 inch(15f gp), elbow 2 inch(15f gp), elbow 1 inch(15f gp), pvc valve 3 inch(15f gp), pvc valve 2.5 inch(15f gp), pvc valve 2 inch(15f gp), pvc valve 1.5 inch(15f gp), pvc valve 1 inch(15f gp), pvc pipe 3 inch(15f gp), pvc pipe 2.5 inch(15f gp), pvc pipe 2 inch(15f gp), pvc pipe 1.5 inch(15f gp), pvc pipe 1 inch(15f gp)

Central Government/Public Sector

CTN :43252686

15 Jan, 2026 71.84 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of earth work in excavation by mechanical means , filling by brought out excavated earth , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand floors , providing and laying in position specified grade of reinforced cement concrete , shuttering in foundations , shuttering in superstructure columns , steel reinforcement for rcc , applying priming coats with primer , wall painting with acrylic emulsion paint , structural steel work riveted , brick work with common fly ash bricks , half brick masonry with non modular fly ash bricks , 15 mm cement plaster with mix , providing frosted glass panes 4 mm thick , neat cement punning. , painting with synthetic enamel paint , finishing walls with acrylic smooth exterior paint , providing and laying ceramic glazed floor tiles , providing and laying 60mm thick factory made cement concrete paver block , 6 mm cement plaster of mix , providing and fixing on wall face unplasticised rigid pvc rain water pipes , grading roof for water proofing treatment , making soak pit , providing and fixing gi , do gi pipe 20m dia , do gi pipe 25m dia , do gi pipe 40m dia , providing and fixing white vitreous china pedestal type , providing and fixing white vitreous china wash basin , providing and fixing precoated galvanised steel sheet roofing accessories , supplying and applying two coats of white wash , providing and placing on terrace polyethylene water storage tank , providing and fixing ptmt pillar cock , providing and fixing on wall face un plasticised rigid pvc swr , providing and fixing brass bibcock , providing and fixing mirror of superior glass , providing and fixing cp brass shower rose , providing and fixing cp brass shower valve rose , clearing jungle , 30 mm thick factory made polyvinyl chloride , supplying chemical emulsion , providing and applying white cement based putty , laying of one number pvc , supplying and fixing cable route marker , supplying and making end termination , supplying and fixing of following ways surface , supplying and fixing following rating , supplying and fixing dp sheet steel enclosure , supply of exhaust fan , installation of exhaust fan , supply of ceiling fan , installation testing and commissioning of ceiling fan , supply of ceiling fan regulators , supplying of led lights 20w , supplying of led lights 36w , supply of amps switch piano switch , supply of socket , supply of switch , supply of socket outlet , supplying and fixing 3 pin required. , supplying and fixing suitable size gi box , wiring for circuit submain wiring , wiring for circuit/ submain wiring alongwith earth wire , installation testing commissioning of wall bracket , providing and fixing danger notice plate , supplying and fixing metal box , supplying and fixing metal box , providing & fixing fixing metal box , earthing with copper earth plate , providing and fixing 25 gi , providing and fixing of lightning conductor finial , providing and fixing , providing and fixing gi , providing and fixing gi

CTN :43420006

16 Jan, 2026 NA

Baramulla - Jammu And Kashmir

Tender For corrigendum : upgradation of sheds - iron shutter, window repair, plaster and concrete work

CTN :43424931

16 Jan, 2026 1.17 Lacs

Perumbavoor - Kerala

Tender For corrigendum : general-pvip-annual maintenance of bhoothathankettu check dam shutter and adiyody regulator for the year 2025-26-general mechanical work

CTN :43498722

16 Jan, 2026 70.70 Lacs

Alappuzha - Kerala

Tender For general thanneermukkom swb 46 ft radial lock gate shutter fixing by fabrication and installation of embedded parts with ss anchoring rod and other associated works general mechanical work

Central Government/Public Sector

CTN :43531904

29 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of sliding glass shutter for bus type window (for lhb coaches) to drg. no. c&w.lgd.sk no. 1070 col1(lh) qty-91 nos. & sliding glass shutter for bus type window (for lhb coaches) to drg. no. c&w.lgd.sk no. 1070 col5(rh) qty-91 nos. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43532224

19 Jan, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of s.s. angle moulding for beml coaches shutter panel size- 620 mm length x 13 mm x 25 mm x 2 mm thick to is:-6911, gr.304, as per drg. no.crw/sk-222 alt 2 & 3. as per drg. no.crw/sk-222 alt 2 & 3. [ warranty period: 30 months after the date of delivery ]

Shutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector