Tender For quotation enquiry for the work of new electrification works in building materials testing lab civil engg department at vnit campus nagpur - new electrification works in building materials & testing lab, civil engg. department at v.n.i.t. campus, nagpur., providing & erecting 4 pole mccb, 415v, up to 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-mccb, supplying and erecting ss enclosure of 1.6mm thick with detachable gland plate suitable for upto 100a mccb., supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four copper bars, 500v, 100a having 10mm ( width) x 1.6 mm (thickness), with 99.9 % copper purity as per e91e grade & current density 1.6 a per sq mm compliance to is 5082 and enclosure fabricated with 16 swg crca sheet and epoxy paint, with suitable number of ways and with smc/dmc insulators and accessories of suitable rating and two nos of separate earthing terminals complete as per specification no. cp-bb, supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four copper bars, 500v 200a having 20mm ( width) x 2 mm (thickness), with 99.9 % copper purity as per e91e grade & current density 1.6 a per sq mm compliance to is 5082 and enclosure fabricated with 16 swg crca sheet and epoxy paint, with suitable number of ways and with smc/dmc insulators and accessories of suitable rating complete as per specification no. cpbb, supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable, 1100 v 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb-lt/al, supplying, erecting & marking fp mcb 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-mcb, supplying & erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb/tp mcb/fp mcb/rccb/rcbo complete erected on provided angle iron/gi frame., supplying & erecting mains with 4x16 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. wg-ma/bw, supplying and erecting exhaust fan heavy duty 230 v a.c. 50 cycles 375/380 mm. 1400 rpm complete erected in position as per specification no. fgfn/exf, supplying & erecting of 20w led tubelight combined fitting with 01 year warranty, point wiring for light/bell/exhaust fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthing and required accessories as per specification no. wg-pw/sw, supplying and erecting modular type switch 16a on provided plate and box with wiring connections complete., supplying and erecting modular type 3 pin 6/16a multi socket with safety shutter on provided plate and box with wiring connections complete., supplying and erecting 16a, 10ka, spmcb suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected., supplying and erecting modular type blanking plate one module, on provided plate & box., supplying and erecting pvc surface modular switch box with double mounting & front plate for 8 module complete duly connected., supplying and erecting pvc trunking (pvc casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification no. wg-ma/con., supplying and erecting pvc trunking (pvc casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification no. wg-ma/con., supplying pedestal type air circulator 600
Tender For furniture supply - iron almirah book shelf (specification in td), table for reading room (specification in td), student chair (specification in td), newspaper stand (specification in td), aluminum staircase steps ladder, foldable with slip-resistant wide aluminum steps, heavy duty with anti-skid feet, double-locking technology for safety hand grip (specification in td), vacuum cleaner philips power pro fc9352/01-compact bagless vacuum cleaner for home |1900watts for powerful suction |compact and lightweight| power cyclone 5 technology and multiclean nozzle | (specification in td), notice board (quantity 4) notice board 5 feet x 3 feet shutter board with acrylic cover premium material pin-up board/bulletin board/display board with 100 push pins for office, school & college (5x3 feet, red) (specification in td), students bags racks (specification in td), library counter chairadjustable high curvy chair suitable for counter, (black & chrome) (specification in td), library office table (specification in td), library office chair (specification in td), library chairs (specification in td), library counter l type (specification in td), three seater waiting area reception chair (silver) (specification in td), godrej interio chair with adjustable armrest, cushioned headrest (specification in td), writing chair (specification in td), podium (specification in td), wooden arm rest chair (specification in td), student table (specification in td), student chair (specification in td)
Tender For supplying and stacking various type of building, road &other construction materials, atvarious places of taluka panchayat,kalol under mgnrega (annual unit rate) - cement isi mark 53grade, etc.opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900m.m. dia, r.c.c. np3 pipe 600m.m. dia, r.c.c. np3 pipe 300m.m. dia, crushed stone aggrigate for hard qulity 10 to 20 mm, crushed stone aggrigate for hard qulity 40 to 63 mm, hand broken metal 25-90m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, pvc water tank 1000 ltr, galvenise iron sheet 0.8 tick class 3, iron angle, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), road roller hire charges 8 tone, wash basin 550*400m.m., colour distamper primer, marble slab/platform 25m.m. thick double polished, galvanised mild steel tube medium grade 20m.m., galvanised mild steel tube medium grade 32m.m., galvanised mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, flush cock, chromium plated brass /bib tap 15m.m., sw gully trap 100 x 100 mm size, kitchen sink 600m.m.*450m.m.*150m.m. (steel), pvc pipe 110m.m.dia 6kg per/sqm, supplying and staeting brickbals 40 mm, hire charge for vibrator surface, hire charge for vibrator needle, crushed aggrigate 6 - 10 m.m., crushed stone aggrigate for hard qulity 20 mm, aggregate 12-40m.m., machine cut metal 40-63m.m., m.s. grill, teak wood door window frame with shutter, asbestos sheet, casing pipe 6 kg./c.m.(150m.m.)
Tender For b1/tender/2024-2025/mregs material supply - material items :, 0002-hire charges of concrete mixer 0.25 to 0.40 cum with hopper, 0012-vibrator(needle type 40mm), 0041-joint cutting machine with 2-3 blades, 0295-stone aggregate(singale size):20mm normal size, 0296-stone aggregate (singale size):12.2 mm nominal size, 0324-coal tar, portland cement, brass tower bol 250*10mm, brass 150mm floor door stopper(0.357 kg), oxidised mild steel sliding door boli 250*16mm, synthetic enamel paint, white cement, plastic emulsion paint, coarse sand (zone iv), fine sand, kota stone slab 20mm to 25 mm thick, teak wook in planks, watre proofing material, c i bracket for wash basin and sink, g.i pipes 25 mm dia, g i pipes 50 mm dia, vitreous china orrisa type w.c pan size 580 mm, floating glass sheet of 5.5 mm thick, display board/cib, conveyance, gst, all drive screw (for gypsum board), frosted glass sheet 4mm, flexible pvc waste pipe, aluminium t or l section, binding wirw, turpentine oil, ceramic tiles, metal primer, interlocking c.c paver block, quality control and survey, mr6203-bricks, stone ware pipe 150mm dia, steel tmt fe 500, rubble, hum prope, nylon/pvc gasket, cpcv pipe 15mm dia, plunber with tool kits, aggregate 40mm, socket brass for 32mm tap, soft murum, welder, all frame rail angle anodized, hold fast iron 300*40*5 mm, alluminium section, lock for sliding shutter, all bearing roller, structural steel, oil enamel paint, handle 150mm stainless steel(rounded shape), hinge stainless steel 125mm, steel primer, aldrop, sinc base oil paint, material coast rs.1 per unit, white glazed wash hand basin, pvc connector 15mm dia, steel centering for foundation, steel centering for columns/pillera, steel shuttering for lintel,beams,grider,plinth beam,cantilever, steel shutering for roof ,landing,balcony having 12.5 cm tk, electric vibrator, tiles cutting machine, water tank, stop tap brass with crunch wheel 15mm dia, piller tap 12mm dia chronimu plated heavy, surface vibrator, stoneaggregate 40mm, water profing cement paint, mt vibratory roller for 200mm loose metal, iron square and rectangle pipe, iron circle pipe, iron door with frame and palla, paving block, water proofing liquid, water proofing net, mixer machine with operator, jcb with operator, tiles ceramic, aluminium window, iron window, checkers, door set, tractor-trolly with driver and labour (up to 1km form gp), ms nails (khilla), centring bhada, iron board, ferul, hpl bathroom door, polimer liquid(water proofing), nani trap, toilet seat, comod seat, r.c.c.pipes np2 class 900mm dia, r.c.c.collar np2 class 900mm dia, r.c.c pipes 900 mm dia, worksite facilitie/creche/drinking water/firsy aid, tap 1/2 inch brass, unioun, valve 1 inch, bid cock 1/2, niddle, channel, granite
Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton
Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.