Latest shuttering vibrator Tenders | Government shuttering vibrator Tenders

Central Government/Public Sector

CTN :39835749

05 Apr, 2025 1.98 Lacs

Chandrapur - Maharashtra

Tender For providing of custom bid for services - testing and certification as per regulation cear 2023 of lt ht transformers ocb s ht starters and ht motor installed at various places of naigaon ocm wani area

CTN :39341700

05 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : upgradation augmentation of shot blasting equipment and shot blasting room including replacement of three motor driven screw lp air compressor for upgradation augmentation of production shop floor (ab and ac bay) at ins eksila - upgradation/ augmentation of shot blasting equipment and shot blasting room including replacement lp air compressor as indicated in part-ii of rfp consists of the following:-, dismantling and degutting of lp air compressors along with all associated equipments and shifting work as specifiied in para 1(1.1)(a) part ii of rfp., lp air compressor, lp air compressor as specifiied in para 3 (3.1) part ii of rfp., dryer unit as specifiied in para 3 (3.1) part ii of rfp., air receiver tank (2000 liters) as specifiied in para 3 (3.1) part ii of rfp., air filter as specifiied in para 3 (3.1) part ii of rfp., acoustic canopy as specifiied in para 4 (4.1)(a) & (b) part ii of rfp., electric power distribution board/ control panel as specifiied in para 4 (4.1)(d) part ii of rfp., dismantling and degutting of shot blasting system along with all associated equipments and shifting work as specifiied in para 1.2 of part ii of rfp., shot blasting system, protection liner & rubber lining as specifiied in para 3(3.2) part ii of rfp., recovery unit as specifiied in para 3(3.2) part ii of rfp., dust collector & exhaust system as specifiied in para 3(3.2) part ii of rfp., shot blasting unit as specifiied in para 3(3.2) part ii of rfp., all other items associated with main eqipment which are mentioned in part ii of rfp [ex para 6(a) & 6(b) etc] part ii of rfp)., civil work for (refers to para 8 of part ii of rfp)., standard accessories (refers to para 9 of part ii of rfp), two years operation & maintenance spares (refers to para 10 of part ii of rfp), special maintenance tools and test equipment (refers to para 11 of part ii of rfp), technical literature / certificates / documentation (refers to para 13 of part ii of rfp), acceptance, testing, trials and commissioning charges (refers to para 14 of part ii of rfp), training (refers to para 16 of part ii of rfp), any other item such as transportation, insurance, freight, packing etc, notes:1. cost of item listed at sl 1 to 12 and 13 (if applicable) are to be quoted in the respective rows of the price bid sheet. 2. bidder not permitted to include cost of items listed at sl 6 to 13 with sl 1 to 5 as lumpsum amount 3. bidder required to mandatorily quote for sl 1 to 5 and 12 failing which bid shall be treated as non bonafide and liable for rejection.4. bidders are mandatorily to quote gst/ taxes as applicable against each serials, falling which bid shall be treated as non bonafide and liable for rejection.

CTN :39585186

29 Mar, 2025 1

Jaipur - Rajasthan

Tender For bid to ras supply of replacement of conventional motor starter by energy saving variable frequency drive - material and labour for disconnecting the cabel connection from conventional starter complete all as specified and directed , material and labour for taking down conventional starter and removing to mes store for issue as sch of credit complete all as spd and directed. , supply and fixing variable frequecy drive vfd 15 hp 3 phase heavy duty 380 to 480 volt strong overload capacity with enclosure panel complete all as specified and directed , material and labour for reconnecting the cabel connection of vfd and mccb complete all as specified and directed , material and labour for testing of vfd on load with complete satisfaction of engineer in charge complete all as specified and directed

CTN :39834882

16 Apr, 2025 NA

Pulwama - Jammu And Kashmir

Tender For supply of boom barrier brushless dc motor with opening time 0.6 to 2.5 sec , round arm 5 mtr length , remote with receiver 02 remote with each boom barrier , single channel loop detector , push button , 4 door controller , 2kva online ups with inbuilt battery , 12u outdoor steel rack , 2 core power cable 2.5 sq mm , traffic light , ofc cable 6 core , media converter , 6u rack fully loaded , hdpe duct pipe 25 mm , server computer system with software , digging and laying of cable , installation commissioning and testing charges for complete job

CTN :39446340

29 Mar, 2025 15.62 Lacs

Kalpakkam - Tamil Nadu

Tender For bid to ras tender for supply of maintenance of pac and vrf ac units - conducting pressure hold testing of ac units for identification of leaks as per sl.no. 1 of scope of work. , arresting of leaks in pac and vrf refrigeration circuits by brazing as per sl.no. 2 of scope of work , charging of refrigerant in refrigeration circuits as per sl.no. 3 of scope of work , supply and installation of 0.37kw capacity new condenser fan motor with leaf as per sl.no. 4 of scope of work , supply and installation of 1.1kw capacity condenser fan motor with leaf. as per sl.no. 5 of scope of work , supply and installation of pac units mother boards with step down transformer and related circuit board. as per sl.no. 6 of scope of work , supply and installation of refrigerant dryers in refrigeration circuits as per sl.no. 7 of scope of work , supply and installation of lp and or hp switches in pac units. as per sl.no. 8 of scope of work , daily switching on and switching off of pacs and vrf ac units in old admin building , psb and simulator building as per sl.no. 9 of scope of work , replacement of belts and alignment of motor with evaporator blower as per sl.no. 10 of scope of work. , cleaning of filters from pac units and fixing back to original location as per sl.no. 11 of scope of work. , fabrication and installation of vrf condenser unit support structure at simulator building as per sl.no. 12 of scope of work. , supply and installation and commissioning of r22 compatible 5.5tr scroll compressor in pac units as per sl.no. 13 of scope of work. , supply and installation and commissioning of r410a compatible 6tr scroll compressor in vrf ac units as per sl.no. 14 of scope of work. , supply and installation of remote controller with control boards for pac units as per sl.no. 15 of scope of work.

CTN :39826848

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For clean room (d block - iitm rp) - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shroude

CTN :39832256

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For tender for clean room - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shrouded/tinned

CTN :39785202

28 Mar, 2025 29.33 Lacs

Thrissur - Kerala

Tender For general-kizhipullikara lis-construction of kizhuppillikkara lift irrigation scheme in thanniam panchayath, thrissur districtelectrification, installation, testing and commissioning of 75 hp motor pump sets-htelectrical-work

Central Government/Public Sector

CTN :39837338

08 Apr, 2025 NA

Kota - Rajasthan

Tender For supply & testing of sewage submersible pump motor set 5.5 kw/7.5 hp, 3 phase 415 v ac

corporations/Associations/Others

CTN :39771695

02 Apr, 2025 77.00 Lacs

Karur - Tamil Nadu

Tender For corrigendum : supply, delivery, testing and commissioning of 110 kv x 150 hp of vertical hollow/solid shaft squirrel cage induction motor and pump set and other electrical accessories at vangal head works karur city municipal corporation

Shuttering Vibrator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others