Latest shutters Tenders | Government shutters Tenders

State Government

CTN :39173206

07 Apr, 2025 26.91 Lacs

Kheda - Gujarat

Tender For corrigendum : providing / repairing / servicing of rolling shutters of various building /plant of power house at wtps. (as & when required)

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

CTN :39804350

23 Apr, 2025 4.14 Lacs

Alappuzha - Kerala

Tender For deposit-devikulangara gramapanchayath replacing of damaged shutters-fabrication and erection of 2 nos ms shutters and hoisting mechanism,providing screw rod, lader, hoisting platform etc and painting the shutter and hoist platform at pandakasalayil in devikulangara grama panchayath in alappuzha district-general mechanical work-general mechanical work

State Government

CTN :39825728

04 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For a/r & m/o to various residential buildings under division no.iii shimla. (sh:- white washing, repair of cupboard shutters and other miscellaneous repair work in set no.8 type-iv at willy park under vidhan sabha sub-division).

State Government

CTN :39825729

04 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For a/r & m/o to various residential buildings under division no.iii shimla. (sh:- white washing, repair of chajja front side and repair of cupboard shutters and other miscellaneous repair work in set n. a-6 type-iv at mla crossing under vidhan sabha sub-division).

CTN :39829738

07 Apr, 2025 NA

Ernakulam - Kerala

Tender For general manjummel 2025 painting of shutters and hoist bridge general mechanical work

Corporations And Associations And Others

CTN :39832502

29 Mar, 2025 4.96 Lacs

Rajouri - Jammu And Kashmir

Tender For supply of precast material such as precast rcc slabs, premix cold emulsion bitumen bags etc. for day to day repair work at m.c. store hari nagar ward no.99/wz. - description/ item, p/f precast rcc slabs/grating 70mm thick manufactured with cc 1:2:4 stone aggregate 20mm nominal size) reinforced with 96 kg/m3 of rcc i/c lapping all four side with m.s. sheet 1.6mm thick and fixing in position complete (drain covers with or without holes), supply and stacking premix cold emulsion bitumen bags, supply and stacking preacst rcc grating with frame 500x450mm, supply ans stacking circular shape 560mm thick shutters with frame ehd 35

Central Government/Public Sector

CTN :39834949

17 Apr, 2025 8.90 Lacs

Budgam - Jammu And Kashmir

Tender For tender for supply of all inclusive annual comprehensive maintenance contract of automatic biparting 2 leafs sliding doors with 12 mm thick clear toughened glass shutters including microprocessor control unit multi sensor detectors inbuilt battery backup in controller profile section adjusting parameters for opening and closing speed holdopen time opening and closing force night lock etc as required make geze opening size up to 2400mmw x 2100mmh , all inclusive annual comprehensive maintenance contract of automatic biparting 2 leafs sliding doors with 12 mm thick clear toughened glass shutters including microprocessor control unit multi sensor detectors inbuilt battery backup in controller profile section adjusting parameters for opening and closing speed holdopen time opening and closing force night lock etc as required make geze opening size up to 2400mmh x 2500mmw , all inclusive annual comprehensive maintenance contract of automatic single 1 leaf sliding doors with 12 mm thick clear toughened glass shutters including microprocessor control unit multi sensor detectors inbuilt battery backup in controller profile section adjusting parameters for opening and closing speed holdopen time opening and closing force night lock etc as required make geze opening size up to 1500mmw x 2100mmh , all inclusive annual comprehensive maintenance contract of automatic single 1 leaf sliding doors with 12 mm thick clear toughened glass shutters including microprocessor control unit multi sensor detectors inbuilt battery backup in controller profile section adjusting parameters for opening and closing speed holdopen time opening and closing force night lock etc as required make geze opening size up to 1700mmw x 2200mmh , supply of 12mm thick toughened glass for existing automatic sliding doors. size of toughened glass 125cm x 236cm