Latest sign maker Tenders | Government sign maker Tenders

Corporations / Associations / Others

CTN :39827882

28 Mar, 2025 14.10 Lacs

Chennai - Tamil Nadu

Tender For providing water supply arrangements and gym equipments to the gym building at 17th street, ashok nagar in div-131, u-31, z-10 (under ward councillor fund 2024-25) - boring using power rig 125mm dia upto hard formati...t time etc. complete as directed during execution, conducting yield test using v notch and with suita...ay as directed during execution for the bore well., supplying and lowering pvc pipe 125mm dia slotted casing pipe of 6kg/sq.cm. isi std., supplying and lowering pvc pipe 125mm dia plain casing pipe of 6kg/sq.cm. isi std., supplying and jointing 25mm dia pvc pipe.including...r fixing with necessary scaffolding etc. complete, supplying and jointing 40mm dia p.v.c pipe.includi...erfixing with necessary scaffolding etc. complete., providing and laying first quality plain ceramic t...ar shall conform to gradation as per is 1542 1977), providing and laying first quality vertified tiles...ement. labour materials etc. (relevent isi std)., supplying and fixing 40mm dia g.m. foot valve, construction of inspection chamber of size 60x60x7...y including necessaryreinforecement etc. complete., supplying and fixing in position best indian type ...ng good all the disturbed portions etc. complete., providing and fixing 75mm dia nahini trap (floor trap) with brassgratings., providing and fixing 110mm dia pvc soil or vent pipe.with relevent isi std.., supplying and fixing p.v.c.pipe 160mm dia rain wat...gsetc. complete as directed during the execution., supplying and erecting sintex or approved equivale...taxes and freight charges within corpn.city limit., supplying and fixing 15mm dia c.p.pillar tap, supplying and fixing 55cm x 40cm colour glazed was...c.p. pillar tap and other fittings etc. complete., providing enamel indication board with proper male or femalefigure of size 35x30cm as directed.., supply of 48" ( 1200 mm ) sweep size 5 star rating ceiling fan with out regulator, supply and fixing of surface mount patty type 1 x ...eathed copper leads from terminals to the fitting., supply and fixing of 450 mm (18") sweep (light dut...ecessary wall opening and making good of the wall., modular wiring with 2x4 sqmm(56/0.3) pvc insulated...hedule of rates from l432 to l730 and l730 & l731), supply and fixing of tneb meter board suitable for... insulated copper wire from eb meter to fuse unit., supply and fixing of 32 a tpnmc switch on suitable...th ms cable entry box with earth connection only, earthing as per the isi specification with an eart...d with 38mm rcc cover slab for the brick masonry, i.si.marked 2x16sq.mm cable, labour for laying of cable through hdpe pipe ( 50 ...pipe (trench size 100mm breadth x 150mm depth ), supplying and fixing of 1.5 hp jet pump set inclu...ries. ( kiloskar, texmo, cri or equivalent brand), supplying and fixing of treadmill: ct 825 weigh...ds like afton, plamax, spirit or equivalent brand), supplying and fixing multi press: pl 9021 of glass...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of lat pull down / seated ro...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of leg extension / leg curf :...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of ab / low back: pl9024 of...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of multi purpose bench: iffi...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of biceps/triceps: pl9023 ...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of flat bench: iffb of t...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of dumbbell rack : ifdb4 of...s like afton, plamax, spirit or equivalent brand), supplying and fixing of dumbbells (pair) (brands like afton, plamax, spirit or equivalent brand), supplying and fixing of plates (brands like afton, plamax, spirit or equivalent brand), supplying and fixing of olympic rod 7 feet : - 250...ds like afton, plamax, spirit or equivalent brand), supplyi

CTN :39794157

02 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For supply of equipment for new electric and hybrid vehicle technology lab - equipments/machinery, lead acid electrolyte batterycapacity: 150ah, voltage: 12 v with hydrometer, multi-meter and high discharge tester, battery load tester voltage: 12v battery capacity, dc to dc converter trainer kit (buck converter kit)input 48 v dc, output 5 v dc, 12 vdc, dc to ac converter trainer kitbattery 12v, power 40 w, supports capacity 32 ah, battery charger unit input voltage- 230v ac, output voltage- 12v, battery type- lead acid battery, battery capacity- up to 80 ah., bldc motor control trainer kit 48v controller, bldc motor 800w / 900w power digital voltage display throttle patch card light indication, two wheeler wiring harness board or kittwo wheeler head light, side indicator, brake light, horn, mount, buzzer, e bicycle kit and accessoriesassemble and test e-bicycle with wiring harness 24v dc controller 24 v dc motor throttle brake power on key head lamp with hornexperimental working model (rear wheel with chain drive included 12 v lead acid battery 2 nos, e bike kit or accessories 48 v bldc controller 750 w 48 v bldc motor throttle, brake power on key, display board head lamp with horn left & right indicator experimental working model, tools: continuity tester, line tester, screwdriver set (allen key, star ), handle type: plastics spanner set (star, open ended), 94 piece tool set 1/2", 3/8" & 1/4" drive, chrome vanadium standard & deep sockets. all tools must be sturdy with folding plastic case., consumable: - soldering iron, flux, de-solder gun or solder wick, lead

Central Government/Public Sector

CTN :39788517

07 Apr, 2025 NA

Hubli - Karnataka

Tender For item description speed indicator board size (1 meter equilateral triangle) fabrication and supply of engineering speed indication indicator 1000 mm equilateral triangle board made up of retro reflective sheeting of high intensity prismatic grade hip type iv to astm 4956 specification on 2mm thick aluminum alloy sheet 14 gauge confirming to is 736 in size and shape using heat lamp vacuum application method along with back support of 25mm x 25mm x3mm angle iron including cutting, riveting and fixing th e angle leg 75mm x 75mm x 6mm size 3500mm long from the bottom of main board painting of angle iron support with two coats of enamel paint over one coat of primer the size of board, ( 10kmph- 02 nos, 15 km ph-05 nos , 20kmph- 10 nos, 30 kmph- 10 nos, 40kmph- 10 nos, 45kmph- 15 nos, 50 kmph- 10 nos ,60 k mph- 15 nos75 kmph- 05 nos, caution indicator boards- 82 nos and t-boards- 82 nos . [ warranty perio d: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :39788988

31 Mar, 2025 NA

Valsad - Gujarat

Tender For supply of set of destination boards, belly board and v shape coach indication board for lhb/icf rakes as per annexure-a (set consists of one no each ite m) [ warranty period: 30 months after the date of delivery ]

CTN :39038232

29 Mar, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

CTN :39649227

25 Mar, 2025 10.00 Lacs

Balotara - Rajasthan

Tender For supply, installation, testing and commissioning of various electric item on annual rate contract - supply of din rail mounting contactor and accessories confirming to iec 61095 with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr modular contactor 40a - 3no, supply of wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor as required. for additional technical parameters of product / work refer annexure a attached with this bsr4.0 sq.mm, 6.0 sq.mm, 10.0 sq.mm, supply of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 mperes including making connection, programming conforming to iec 0730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer exure "a" attached with this bsr.one day & week reserve (analog type ), one day & week reserve (digital type ), supply of 240/415 v ac mcb with positive isolation of 10 ka breaking capacity (b/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a & above rating including making onnections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr. single pole mcb (with b/c curve tripping characteristics) 0.5 a to 5 a rating, 6 a to 32 a rating, 40 a rating, 63 a rating, providing & fixing of 240/415 v isolator isi marked is:13947- iii/conforming to iec 60947-3, suitable for ac22a utilization category, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering overall poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. ip 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr. double pole isolator 30 a / 40 a rating, 63 a rating, triple pole isolator 40 a rating, 63 a rating, sitc of single stage, water cooled, high speed (2880 rpm), horizontal, centrifugal, openwell submersible pumps set pre filled with coolent water and fitted with mechanical seal - t/c vs t/c, thrust bearing shall be of carbon + s.s.the stator body of single phase pump shall be of ss and rest of all shall be of cast iron. all casting parts should be cathod electro deposition (ced) coated and other construction material should be confirming to is : 14220: 2018 . the overall performance of pump shall confirm to bee energy efficiency level of 3 star. valid bee certificate from oem must be submitted for the same. motor should be ie2 class as per iec 60034-2-1: 2007, iec 60034-30: 2008, & is12615:2011, including making connection etc as required complete in all respect. oem shall have submit nabl / cpri / erda accrediated lab type test certificate before executio

CTN :39595148

26 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of flex and board - retro radium flex print with ss framing 7x3x4 ft , star flex print black back 8x6 ft , star flex print black back 8x5 ft , vinyl print with sun board 1x4 ft , vinyl print with sun board 3x4 ft , radium board with acp sheet 3x2 ft , star flex print black back 12x6 ft , star flex print black back with framing 8x6 ft , acrylic sheet board 34x30 ft , acrylic sheet board 34x24 ft , iron framing indication board 7x4 ft

Central Government/Public Sector

CTN :39586180

04 Apr, 2025 NA

Bangalore - Karnataka

Tender For award of license for provision of sale of milk and milk product at milk stall no. ms-72 on pf. no. 2 near shelter and coach indication board no. 19 at hosur (hsra) railway station for a period of five years.

Central Government/Public Sector

CTN :39586187

04 Apr, 2025 NA

Bangalore - Karnataka

Tender For award of license for provision of sale of milk and milk product at milk stall no. ms-73 on pf. no. 1 near coach indication board no. 14 at banaswadi (band) railway station for a period of five years.

Sign Maker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations / Associations / Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector