Latest silicon rubber Tenders | Government silicon rubber Tenders

CTN :42960123

31 Dec, 2025 NA

Kanchrapara - West Bengal

Tender For supply of silicon rubber tape htv - hbt - h5 - 0.5 mm x 25 mm

CTN :42936248

17 Dec, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of 01.size clear opening diameter 800 mm 02.color green on both sides.the handles to be marked with photo luminescent tapes. 03.opening mechanism-escape scuttles are to be spring assisted and provided with a wheel assembly on the inside and a slot with a detachable operating handle from outside for opening and closing of the scuttles.the operating handle should be supplied with associated bulkhead-mountable press-fit clamps to enable securing the operating handle onto the bulkhead. 04.material- as per class requirement 05.all ees are to be flush type spring assisted with auto retention clip and operable from above and below by one person.they are to be provided with an opening arrangement from above with detachable operating handle and press-fit clamps for securing the handle on to the nearest bulkhead. 06.ees are required to operable from both sides and tested up to 1.2 bar pressure or as per class requirement 07.marking- each scuttle should have punch mark with oem name date of fabrication month and year .marking symbols should be prominent legible and i.a.w. with nes118 and nes119. 08.rubber beading-rubber beading of silicone as per ncd 5910 are to be used for the ees , on board spares for ess consisting of the following -1.ss nuts and bolt sets- 10 nos -2.ss screws-10 nos -3.brass washers-10 nos -4.split pins-04 nos -5.silicon rubber beading-04 mtrs -6.adjustable spanner-01 nos , documentation -1.class approved drawings- 01 nos. -2.technical -operating-installation-testing and maintenance manual-01 nos. -3.inspection release note-inspection reports of inspection agency-certified test reports-materialtest reports-certificate for dimensional accuracy weight certificates with position of c.g etc-01 nos. -4.soft copy of all above documents in cd or pen drive-01 nos. , 01.size clear opening diameter 800 mm 02.color green on both sides.the handles to be marked with photo luminescent tapes. 03.opening mechanism-escape scuttles are to be spring assisted and provided with a wheel assembly on the inside and a slot with a detachable operating handle from outside for opening and closing of the scuttles.the operating handle should be supplied with associated bulkhead-mountable press-fit clamps to enable securing the operating handle onto the bulkhead. 04.material- as per class requirement 05.all ees are to be flush type spring assisted with auto retention clip and operable from above and below by one person.they are to be provided with an opening arrangement from above with detachable operating handle and press-fit clamps for securing the handle on to the nearest bulkhead. 06.ees are required to operable from both sides and tested up to 1.2 bar pressure or as per class requirement 07.marking- each scuttle should have punch mark with oem name date of fabrication month and year .marking symbols should be prominent legible and i.a.w. with nes118 and nes119. 08.rubber beading-rubber beading of silicone as per ncd 5910 are to be used for the ees , on board spares for ess consisting of the following -1.ss nuts and bolt sets- 10 nos -2.ss screws-10 nos -3.brass washers-10 nos -4.split pins-04 nos -5.silicon rubber beading-04 mtrs -6.adjustable spanner-01 nos , documentation -1.class approved drawings- 01 nos. -2.technical -operating-installation-testing and maintenance manual-01 nos. -3.inspection release note-inspection reports of inspection agency-certified test reports-materialtest reports-certificate for dimensional accuracy weight certificates with position of c.g etc-01 nos. -4.soft copy of all above documents in cd or pen drive-01 nos. , 01.size clear opening diameter 800 mm 02.color green on both sides.the handles to be marked with photo luminescent tapes. 03.opening mechanism-escape scuttles are to be spring assisted and provided with a wheel assembly on the inside and a slot with a detachable operating handle from outside for opening and closing of the scuttles.the operating handle should be supplied with associate

Central Government/Public Sector

CTN :42951414

08 Dec, 2025 3.91 Lacs

Haridwar - Uttarakhand

Tender For supply of gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,gasketw98413900077,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,cordhw5914690013,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,silicone rubber cordshw5964498019,sealing ring w98413500052,sealing ring w9841

Central Government / Public Sector

CTN :42618131

18 Dec, 2025 NA

Panipat - Haryana

Tender For corrigendum : procurement of gas turbine spares for gt 3 and 5 - list of item(s) / work(s) as per tender documents, t/c arngmnt no2 & th brg,p/n:1to11,14,15, arngmnt of exhaust t/c, p/n: 1-49, arngmnt of mag pick up p/n:3,19 & 21, holder, p/n: 4, dwg: 310pb41-443, holder, p/n: 5, dwg: 310pb41-443, holder,p/n: 6, dwg: 310pb41-443, claw washer,p/n:7,dwg.310pb41-443, nut,p/n:8,dwg.310pb41-443, set screw,p/n-9,dwg.310pb41-443, tongued washer,p/n-10,dwg.310pb41-443, lock washer, p/n: 14,dwg: 310pb41-443, tongued washer, p/n:20,dwg: 310pb41-443, bolt, p/n: 23, dwg: 310pb41-443, tongued washer,p/n:24, dwg:310pb41-443, lock washer, p/n: 30, dwg: 310pb41-443, conduit arr wh space t/c, p/n:2 to 10, silicon rubber, p/n:17,dwg: 310pb41-443, silicon rubber, p/n:18,dwg: 310pb41-443, t/c arngmnt 1st wh fwd.p/n:3to9 & 11to13, arngmnt of t/c wh sp & a, p/n:14-41, g33cs starting clutch proximity switch, bolt,p/n-15,dwg-310pb41-443, knock pin,p/n-16,dwg-310pb41-443, holder,p/n-26,dwg-310pb41-443, holder,p/n-27,dwg-310pb41-443, holder,p/n-28,dwg-310pb41-443, bolt,p/n-29,dwg-310pb41-44, knock pin,p/n-31,dwg-310pb41-443, block,p/n:5,dwg310rc02-152, hex. socket bolt,p/n:6,dwg:310rc02-152, hex. socket bolt,p/n:7,dwg:310rc02-152, spring washer,p/n:8,dwg:310rc02-152, sleeve,p/n:15,dwg.310qc64-261, block,hoisting,60 ton w/15mm wire,spm, gland,p/n:17,dwg.310qc64-261, heat shrink. tube,p/n:12,dwg.310qc64-292

corporations/Associations/Others

CTN :42947855

05 Dec, 2025 NA

Chennai - Tamil Nadu

Tender For auction sale of silicon rubber case,mobile phone materials,stabilizer cylinder gp,conductor, pivot, contact finger, etc,machinery viz parts with accessories,diffuser insulation pillow,flap disc

CTN :41033723

16 Dec, 2025 2.22 Crore

Jaipur - Rajasthan

Tender For corrigendum : replacement work of existing porcelain disc insulator strings by silicon rubber housed composite insulator (120 kn suspension type) for 400 kv s/c ratangarh stps ckt 1st and ckt 2nd at suspension towers

Central Government/Public Sector

CTN :42630193

05 Dec, 2025 NA

Ajmer - Rajasthan

Tender For corrigendum : roof mounted ac package unit (rmpu) for lhb eog ac coaches in coach sets consisting of rmpu (with r-407c refrigerant)-02 nos. and microprocessor controller unit -1 no., with supply of bellows set consisting of 01 no. supply air bellow, 02 nos fresh air bellows & 02 nos. return air bellows ducts made of meta aramid/ para- aramid fabric with silicon rubber coating on both sides to spec. no. rdso/pe/spec/ac/0197-2020 (rev-0), rmpu as per specification no rdso/pe/spec/ac/0061-2005, rev-1, type-i & microprocessor controller unit to rdso/pe/spec/ac/0139-2009, rev-1, complete with accessories, as per scope of supply as in the rdso specification.

Central Government/Public Sector

CTN :42925620

10 Dec, 2025 NA

Hubli - Karnataka

Tender For supply of swd -stiched rubber pad m,l compatible with medichem with high quality silicone rubber covered with cloth casing and should have sheath made of non conducting material like fibre or plastic

corporations/Associations/Others

CTN :42869317

18 Dec, 2025 11.70 Crore

Jaipur - Rajasthan

Tender For e-bid for rate contract cum supply and empanelment of surgical items - braided e caprolactonecoated lactomer 1, 90cm gs-25,37-40mm1/2 circle taper point, braided e caprolactone coated lactomer 2-0 90cm gs-25,3omm1/2 circletaper point, polypropylene blue monofilament, 2-0, 90 cm 1/2 circle round body double needle 26 mm, polypropylene blue monofilament usp3/0,2,90 cm,1/2 circle taper point (double armed),26 mm, polypropylene blue monofilament, 4-0, 75 cm 1/2 circle round body double needle 17 mm, hand activated curved taper tip coagulating shears compatible with ultrasonic cutting and coagulation device,9cm length,16mm curved active blade with adaptive tissue technology capable of sealing blood vessels up to and including 5mm in diameter, with ergonomic symmetrical finger ring grip-focus 9, hand activated curved taper tip coagulating shears compatible with ultrasonic cutting and coagulation device,17cm length,16mm curved active blade with adaptive tissue technology capable of sealing blood vessels upto and including 5mm in diameter, with ergonomic symmetrical finger ring grip - focus 17, synthetic oxidised re- generated cellulose double layered with peg and trilysine size 5*10cm or size 5-7 x 7-11 cm or size 4x 8 inch, double wall resuscitator with peep valve in paediatricsit should be fully autoclavable double wall with hand strapit should be supplied with autoclavable reservoir bag it should have a singleshutter valve system made of silicone rubberit should have easy attachment of peep valve for peadiatricit should have provision to attach manometer for paediatrics ambu bagbag volume: mark iv baby (300 ml)weight: baby (190 g)it should be us-fda, ce & iso certified, ultrasorbs ap disposable drypads,dry pad for moisture management, 58.4x90cm, with breathable layer, super absorbent core, aqua shield film and air permeable back sheet, absorbency of 1800- 2300gm, usfda/ce/biscompliant, iso13485 compliant, volumetric incentive spirometer (adult) volumetric incentive spirometer (adult) 4000 ml with handle. volume measurement must be compact comfortable designed to accommodate large inspired volumes. must have good-better-best flow window & advanced, low work-of-breathing design.particulate filter screen in device housing must help to reduce risk of foreign matter passing to patients.expandable and collapsible tube must help patients find comfortable position for treatments and can be removed when storing the device. ergonomic swiveled mouthpiece allows to patients create tight seal to enable more accurate measurement. flow indicator with smiley face provides visual target for desired inhalation and bright green flow indicator make it easy for patients to see results. manufacturer must be us-fda registered & certified with en/eu iso 13485 & applicable 510k &ce certification., neonatal high flow cannula having 8 litreflow. it can also be used for hfnc + nippv/cpap. should have a soft tip., pur-xro catheter 20 cm, 28g/1fr picc line with stylet, splitting needle with securing wings with 8cm extension tubing ( flow rate 0.7ml/min)., pur-xro catheter 30 cm, 24g/2fr picc line with split cannula and 10cm extension tubing over catheter (flow rate 4.5ml/min)., silicone foleys catheter with three noble metal alloy coating consisting of gold, silver & palladium (coated internally & externally surfaces), silicone foleys catheter with three noble metal alloy coating consisting of gold, silver & palladium (coated internally & externally surfaces), silicone foleys catheter with three noble metal alloy coating consisting of gold, silver & palladium (coated internally & externally surfaces), long term double lumen dialysis catheter with kit accessories should be provided ( catheter,pull apart sheath, dialator, tunneling stylet,guide wire j/s,with disppencer and injection caps, symmetrical tip retrograde and antigrade long term double lumen dialysis catheter size 15 fr x 23 cmusfda certification, absorbable

corporations/Associations/Others

CTN :42895698

26 Dec, 2025 3.92 Crore

Bharuch - Gujarat

Tender For supply & application of rtv silicone rubber high voltage insulator coating on insulators of bpi/ct/pt/cb/isolator at 220kv dahej s/s under bharuch am division

Silicon Rubber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others