Latest site improvements Tenders | Government site improvements Tenders

Central Government / Public Sector

CTN :43013449

09 Dec, 2025 1.40 Crore

Chennai - Tamil Nadu

Tender For construction of new a site ro at location khadi board mavungal on panathoor mavungal road ajanur, hosdurg taluk kasaragod dist and canopy work at ro nannambra manappuram dist for kozhikode divisional office under kerala state office

State Government

CTN :43013484

07 Dec, 2025 4.94 Lacs

Una-Hp - Himachal Pradesh

Tender For construction of synethic track at village rora tehsil haroli distt.una sh preparation of topographical, contour site plan, marking of boundary as per khasra plan deposit work

State Government

CTN :42997721

26 Dec, 2025 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For construction of state cancer institute at radha krishanan medical college hamirpur at jol sappar tehsil nadaun district hamirpur (hp). (sh:- part-i (civil work) construction of building portion including water supply & sanitary installation, septic tank rain water harvesting system, site development and approach road etcetera) part-ii (electrical work) sitc, electrical installation, lift, addressable fire fighting system, mgps system, solar power generation, vrv/vrf system, dg sets, cctv surveillance, fpabx system, av system)

State Government

CTN :42997726

26 Dec, 2025 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For construction of state cancer institute at radha krishanan medical college hamirpur at jol sappar tehsil nadaun district hamirpur (hp). (sh:- part-i (civil work) construction of building portion including water supply & sanitary installation, septic tank rain water harvesting system, site development and approach road etcetera) part-ii (electrical work) sitc, electrical installation, lift, addressable fire fighting system, mgps system, solar power generation, vrv/vrf system, dg sets, cctv surveillance, fpabx system, av system)

State Government

CTN :43019428

07 Dec, 2025 NA

Koradi - Maharashtra

Tender For work of supplying and installing of portable office cabin in position for site office for civil construction circle staff of new 2x660 mw replacement project at koradi.

CTN :43013665

08 Dec, 2025 NA

Kaithal - Haryana

Tender For quotation for consultancy for detailed site inspection, soil sampling, observing xsection of the site and design drawing duly vetted from reputed national institute for the work construction of cut off wall and glacis for the protection of syphon

CTN :42998489

15 Dec, 2025 95.49 Lacs

Pithoragarh - Uttarakhand

Tender For construction work of check dam at kilatam site under ralam of dharchula assembly constituency.

CTN :43003894

08 Dec, 2025 3.36 Lacs

Haldwani - Uttarakhand

Tender For construction of admin block, 10 bedded hospital type v 2 nos and iv 6 nos quarters at 57bn ssb sitarganj uttarakhand and for various work under ee-haldwani cpwd sh providing services of helper for site office cpwd sitarganj

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

Site Improvements Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

State Government

State Government

State Government

State Government