Latest slitting saw Tenders | Government slitting saw Tenders

CTN :39413849

28 Feb, 2025 1.34 Lacs

Mugma - Jharkhand

Tender For administrative approval for horizontal pumps shifting and fitting, bed plate fabrication, tsu shifting,30lbs rail cutting,other sdl machinery related maintenance job at shyampur-b colliery.

Central Government/Public Sector

CTN :39405028

24 Feb, 2025 NA

Chennai - Tamil Nadu

Tender For binding and supply of a6 size books (excess fare ticket books/similar) with 50 l x 3 foils. bi nding with knocking, brown wrapper inserting, checking / examining with correction, side wire stitching (t wo pins in each book) with wrapper, sorting, cutting & bundling as 20 books of each bundle. note: all raw materials will be supplied by railways and work to be done at railway premises only, contractor may also bring their tools and machinery if required for completing the job in time. (one unit is equivalent to one boo k) [ warranty period: 6 months after the date of delivery ]

CTN :38863640

20 Feb, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras supply of slitting saws as per drg. no. t-5314

CTN :39038234

27 Feb, 2025 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin operator advanced machine tools (oamt) tradeat iti suart, gujarat, india (package 4: oamt trade) - surface grinding machine , cnc machining centre , cnc milling tools for above machine , cnc turn centre , edm , cnc simulator , vertical-spindle five-axis machining centres , cnc tool pre setter , ss and sc centre lathe (all geared) with having minimum specification , universal milling machine with minimum specification , horizontal milling machine with minimum specification , vertical milling machine , universal tool and cutter grinding machine , cnc lathe machine , tool holders to suit the cnc turn centre , jig boring , gear hubber , gear shaper machine , power saw machine-hydraulic feed system , cylindrical grinder , power saw machine , pedestal grinder double end type. , radial drill motorized with tapping attachment , drilling machine pillar type with drill chuck & key. , slotter , double column planer , shaping machine , shaping machine , co-ordinate measuring machine , cnc wire cut edm (electrical discharge machining) , special tools and equipment , involutes gear module , surface plate , marking table , scribing block universal , v-block , combination set , spanner double ended metric , adjustable spanner , reduction sleeve morse taper , angle plate adjustable , oil stone , number drill h.s.s(parallel shank) , drill (parallel shank) , twist drills , drill chuck , centre drill , grinding wheel dresser(diamond) , grinding wheel dresser hunting type , c- clamp , c-clamp , tap & die set inbox metric pitch , reamer , reamer adjustable , machine vice , machine vice , machine vice , universal machine vice , universal table angle plate , taper shank twist drill set , shaper tool holder turret type , knurling tools (set of 3) straight and diamond , carbide tipped tools of different sizes and shapes (through away tips) , micrometer outside , micrometer outside , micrometer outside , digital micrometer outside , digital micrometer outside , digital micrometer outside , digital vernier calliper , micrometer depth gauge , dial vernier calliper , vernier height gauge , vernier bevel protractor with blade , bevel gauge , telescopic gauge , sine bar , inside micrometer , inside micrometer , dial test indicator , slip gauge set (normal set) metric , plug gauges , ring gauges , snap gauge , vernier caliper , cylindrical cutter , cylindrical cutter , side and face cutter , side and face cutter , side and face cutter , side and face cutter , equal angle cutter , equal angle cutter , equal angle cutter , t" slot , t" slot cutter , t" slot cutter , t" slot cutter , single angle cutter , single angle cutter , single angle cutter , single angle cutter , double unequal angular cutter , double unequal angular cutter , end mill cutter , concave cutter , convex cutter , corner rounding cutter , corner rounding cutter , slotting cutter , slotting cutter , slitting saw cutter , slitting saw cutter , slitting saw cutter , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , shell & end mill cutter , shell &end mill cutter , face mill cutter with inserted tip , face mill cutter with inserted tip , face mill cutter with inserted tip , involutes gear module , air conditioner split , dg set , air conditioner , wall charts, transparencies and dvds , air conditioner , steel rule , divider , centre punch , hammer ball pane , combination plier , file flat bastard , file flat 2nd cut , engineers screwdriver , file flat smooth , cold chisel flat , try square , straight edge steel , steel tape , soft hammer , sprit level , hammer ball pein , screwdriver, heavy duty , hammer lead , screwdriver , allen hexagonal keys , angle plate , solid parallel sine pair (different size) in metric , oil can pressure feed , file flat 2nd cut , file flat smooth , fi

State Government

CTN :39230408

21 Feb, 2025 47.20 Lacs

Jaipur - Rajasthan

Tender For package-15 - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level.depth upto 1.5 m, providing, laying, spreading and compacting of granular sub-base by providing close graded material (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - iii material, providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and laying un-reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to linesand grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.pcc m-20 -base of drain work, reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete.mild steel and medium tensile steel bars., centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete.

CTN :39163348

21 Feb, 2025 NA

Seraikela-Kharsawan - Jharkhand

Tender For supply of drill hss straight shank dia 3.0mm , drill hss straight shank dia 3.2mm , drill hss straight shank dia 3.70mm , drill hss straight shank dia 4.0mm , drill hss straight shank dia 4.20mm , drill hss straight shank dia 4.50mm , drill hss straight shank dia 5.0mm , drill hss straight shank dia 5.50mm , drill hss straight shank dia 6.0mm , drill hss straight shank dia 6.10mm , drill hss straight shank dia 6.50mm , drill hss straight shank dia 6.80mm , drill hss straight shank dia 7.0mm , drill hss straight shank dia 8.0mm , drill hss straight shank dia 8.50mm , drill hss straight shank dia 9.80mm , drill hss straight shank dia 10.0mm , drill hss straight shank dia 11.0mm , drill hss straight shank dia 11.70mm , drill hss straight shank dia 11.90mm , drill hss straight shank dia 12.0mm , drill hss straight shank dia 12.10mm , drill hss straight shank dia 12.30mm , drill hss straight shank dia 12.40mm , drill hss straight shank dia 12.50mm , drill hss straight shank dia 12.60mm , drill hss straight shank dia 12.70mm , drill hss straight shank dia 12.80mm , drill hss straight shank dia 12.90mm , drill hss straight shank dia 13.0mm , drill hss taper shank dia 14.0mm , drill hss taper shank dia 18.0mm , drill hss taper shank dia 20.0mm , drill hss taper shank dia 23.0mm , slot drill hss dia 5.00mm , slot drill hss dia 7.0mm , slot drill hss dia 8.00mm , slot drill hss dia 12.0mm , slot drill hss dia 16.0mm , end mill hss dia 12.0mm , end mill hss dia 14.0mm , end mill hss dia 16.0mm , end mill hss dia 20.0mm , double angle cutter hss od 100 x t36 x id 27mm, 15 deg x 75 deg , equal angle cutter hss od 80 x t18 x id 27mm, 60 deg , side and face cutter hss od 80 x t6 x id 27mm , side and face cutter hss od 80 x t10 x id 27mm , side and face cutter hss od 80 x t8 x id 27mm , single angle cutter hss od 80 x id 22 x t 32mm, 70 deg , slitting saw hss od 80 x id 16 x t 2.5mm , counter boring tool hss dia 8.0mm , hand reamer hss dia 8h7 , hand reamer hss dia 10h7 , hand reamer hss dia 12h7 , hand tap hss m2.5 x 0.45mm , hand tap hss m3 x 0.5mm , hand tap hss m3.5 x 0.6mm , hand tap hss m4 x 0.7mm , hand tap hss m5 x 0.8mm , hand tap hss m6 x 1.0mm , hand tap hss m8 x 1.25mm , hand tap hss m10 x 1.50mm , counter boring tool hss dia 9.50mm , counter boring tool hss dia 11.0mm , counter sinking tool dia 12.5 x 90 deg , die hss m10 x 1.50mm , die hss m12 x 1.75mm , die hss m8 x 1.25mm

Slitting Saw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government